Can't see screen during bootup m58

Hi, I have a SFF ThinkCentre M58. I had a video prob on one of my partitions (not related to my current prob). I went into bios and switched my video from automatic to I think "IGN" (or something like that)which I thought would be on board video instead of my video card . So now I can't see screen and I get one long beep and 2 shorts. How can I switch back to automatic when I can't see screen? All worked fine on my other bootup partitions as far as seeing screen till I changed "automatic" setting.
Thanks
Solved!
Go to Solution.

Also I naturally plugged the video cable into onboard video after swiitching from automatic but same beeps occured and no screen
Just thought....if I pull out video card will I then be able to see on board video to change back to automatic?
Reset cmos? I hope not but that's not so bad....I'll wait for help
And if I have to reset cmos, I haven't yet found where the jumpers are located. I think i know where they are now
I bet if I take the pci video card out and plug video cable into on board connector it will set me see to change back to automatic...but i'll wait for an answer as the PC is kind of hard to get to.

Similar Messages

Can't see screen on Microphoto in dayli

I cna't see the screen on my Mico-Photo when I am outside. Does anyone know of a fix?

Giday Larry,
I agree there's not much light coming out of the OLE. I found if there's blue sky above, you can't read the screen!
My only fix was:
Remove polarized sunglasses, and
get under shade.
Hey, I'm a technocrat!

Brand new mac pro has blank screen on start up...why? Can here instructions but can't see

I hae a brand new mac pro and the screen is blank during start up. ***...I can here instructions but can't see screen.

That Mac comes with 90 days free phone support from trained Applecare reps. You should take advantage of it.
Another alternative is to make an appointment at the Genius Bar and have them put their hands on it.
Be sure you do something before your 14-day return/exchange (if you bought it direct from Apple) expires, or you may face a 3 to 5 day repair cycle.
Shine a bright light at the screen when it has booted up.
¿ Is the picture "there" but not lit up? that could be a backlight failure.
The F2 key is used to turn up the brightness, if it accidentally got turned down low.

When using Facetime, the person on the other end can't see me - they can hear me, I can see and hear them. Any help? I have a 4S.

I have succesfully used it in the past without problems.

Hi mduggan,
Thanks for visiting Apple Support Communities.
If the other person can't see you during a FaceTime call, first use the Camera app on the iPhone to make sure the camera is working properly. If you don't see an image when using the Camera app, try these troubleshooting steps first:
If the screen shows a closed lens or black image, force quit the Camera app.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps and more information here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the camera is working normally, next troubleshoot FaceTime using the steps in this article:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
All the best,
Jeremy

Can't see the other person, but they can see me. o...

just installed the app today on an galaxy tab 4.
i looked at all the settings in hope to find my soulutuion. i can only see myself during the call? they can see me as well. i would like to see them. but how?

just downloaded this for my galaxy s3 with the same exact results? am i missing a setting somewhere?

Brand New RD240 ThinkServer can not see the LSI 8708EM2 RAID Controller During Bootup

I have a brand new out the box RD240 ThinkServer that can not see the LSI 8708EM2 RAD Controller it came with. This RAID controller simply does not want to function. This RAID Cntroller does not show up during the boot up and I even tried putting in a different slot in the riser card, thinkn maybe it was a bad PCI-e slot, but made no difference. Also the Lenovo Easy Setup software does not find this controller either. So I'm wondering if there is an issue with the RAID Controller or is it a bad Riser card? Does anyone have any idea's on what can be done or what I may be missing?

For a list of Warranty Support contact numbers, please visit:
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
In the U.S. you can call: 1-800-426-7378

I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS. Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

Black screen displaying but i can still see my cursor

please help me!!! I have tried shutting down my computer multiple times and it still shows this grayish-blackish screen!

Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser

When I turn on computer I can't see the apple logo the screen is just a gray screen

When I turn on computer I can't see the apple logo the screen is just a gray screen? I know a person presses "alt" to switch people apple and windows using bootcamp, but I just don't see the apple logo anymore. What is wrong with this thing?

So, do you see any boot choices if you hold alt at bootup?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

How do you use Time Machine to restore a specific users account? I can't do it from the user screen because I am not allowed. I can't do it from the admin because I can't see other users in Time machine.

I can't restore my user account from the users screen because I get an alert that Mac OS needs something. I can't restore in TimaeMachine from the Admin screen because I can't see other users home folders. What can I do?

See Pondini's TM FAQs for starters.

When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time. How do you turn this off?

Your phone might be on Zoom somehow, try just the simple "gestures" fix
Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
From there you should be able to access Settings>General>Accessibility>Zoom>OFF
Hope this helps

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

On your iPad, just go to Settings>Mail, Contacts, etc.>Add account>iCloud and put in the details of the account you set up. Shouldn't be a problem at all.

How do I get rid of "Open All In Tabs" from the Bookmarks dropdown menu? [STUPIDITY] Also, my bookmarks run off the bottom of the screen and I can't see them all.

The bottom of my bookmarks in one subcategory extends beyond the screen on my TV and I can't see them all. I can't see where any arrow to extend the bookmarks to the bottom of the list is so I've been clicking below the last visible bookmark in that list and I hit that STUPID "Open All In Tabs" crap (then everything locks up). WHO IN THE WORLD WOULD WANT TO OPEN ALL OF THEIR BOOKMARKS AT ONCE???? Seems really, really stupid to me. And why won't the bookmarks drop down list allow me to see all of the bookmarks I've saved on that topic? It does not automatically scroll down as large lists on other drop down menus routinely do.

I agree. It is a brainless moronic subcategory!!! I would love to get rid of it!

Can't see screen during bootup m58

Similar Messages

Maybe you are looking for