Can't see screen on Microphoto in dayli

I cna't see the screen on my Mico-Photo when I am outside. Does anyone know of a fix?

Giday Larry,
I agree there's not much light coming out of the OLE. I found if there's blue sky above, you can't read the screen!
My only fix was:
Remove polarized sunglasses, and
get under shade.
Hey, I'm a technocrat!

Similar Messages

  • Can't see screen during bootup m58

    Hi, I have a SFF ThinkCentre M58.  I had a video prob on one of my partitions (not related to my current prob).  I went into bios and switched my video from automatic to I think "IGN" (or something like that)which I thought would be on board video instead of my video card .  So now I can't see screen and I get one long beep and 2 shorts.  How can I switch back to automatic when I can't see screen?  All worked fine on my other bootup partitions as far as seeing screen till I changed "automatic" setting.
    Thanks
    Solved!
    Go to Solution.

    Also I naturally plugged the video cable into onboard video after swiitching from automatic  but same beeps occured and no screen
    Just thought....if I pull out video card will I then be able to see on board video to change back to automatic?
    Reset cmos?  I hope not but that's not so bad....I'll wait for help
    And if I have to reset cmos, I haven't yet found where the jumpers are located.  I think i know where they are now
    I bet if I take the pci video card out and plug video cable into on board connector it will set me see to change back to automatic...but i'll wait for an answer as the PC is kind of hard to get to.

  • Brand new mac pro has blank screen on start up...why? Can here instructions but can't see

    I hae a brand new mac pro and the screen is blank during start up. ***...I can here instructions but can't see screen.

    That Mac comes with 90 days free phone support from trained Applecare reps. You should take advantage of it.
    Another alternative is to make an appointment at the Genius Bar and have them put their hands on it.
    Be sure you do something before your 14-day return/exchange (if you bought it direct from Apple) expires, or you may face a 3 to 5 day repair cycle.
    Shine a bright light at the screen when it has booted up.
    ¿ Is the picture "there" but not lit up?   that could be a backlight failure.
    The F2 key is used to turn up the brightness, if it accidentally got turned down low.

  • How do you use Time Machine to restore a specific users account?  I can't do it from the user screen because I am not allowed.  I can't do it from the admin because I can't see other users in Time machine.

    I can't restore my user account from the users screen because I get an alert that Mac OS needs something.  I can't restore in TimaeMachine from the Admin screen because I can't see other users home folders.  What can I do?

    See Pondini's TM FAQs for starters.

  • When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

    When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time.  How do you turn this off?

    Your phone might be on Zoom somehow, try just the simple "gestures" fix
    Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
    From there you should be able to access Settings>General>Accessibility>Zoom>OFF
    Hope this helps

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

    I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

    On your iPad, just go to Settings>Mail, Contacts, etc.>Add account>iCloud and put in the details of the account you set up.  Shouldn't be a problem at all.

  • How do I get rid of "Open All In Tabs" from the Bookmarks dropdown menu? [STUPIDITY] Also, my bookmarks run off the bottom of the screen and I can't see them all.

    The bottom of my bookmarks in one subcategory extends beyond the screen on my TV and I can't see them all. I can't see where any arrow to extend the bookmarks to the bottom of the list is so I've been clicking below the last visible bookmark in that list and I hit that STUPID "Open All In Tabs" crap (then everything locks up). WHO IN THE WORLD WOULD WANT TO OPEN ALL OF THEIR BOOKMARKS AT ONCE???? Seems really, really stupid to me. And why won't the bookmarks drop down list allow me to see all of the bookmarks I've saved on that topic? It does not automatically scroll down as large lists on other drop down menus routinely do.

    I agree. It is a brainless moronic subcategory!!! I would love to get rid of it!

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • How can I see what I'm actually video recording on iPad Air so that I don't include extra stuff at the borders of the image? It seems to automatically "zoom in" on the screen, but when I export the video, the picture isn't framed well.

    When I try to record a video on the Ipad Air, the screen automatically "zooms in" closer than when I'm taking a photo. So I frame the interview and record it. But when I export it to post it or edit it, I discover that only the screen was zoomed in, the camera wasn't, so I have all this extra stuff around the edges of my frame.
    I don't need to zoom in, but I do need to be able to see what I'm shooting--otherwise, as I'm videotaping, I'm guessing at my picture's framing. But every time I switch from photo to video mode, the screen "zooms in." How can I see what I'm actually recording?
    I've been searching for an answer for this for a while, but I can't find any responses to it! Thanks.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • How can I see the "attachment" icon in my inbox viewing screen?

    All I want is to see which emails in my Inbox have attachments included in them. However, there is no icon in the Inbox viewing screen. I can only see it after I've opened email. Does anyone have any advice on what customization I can use for this problem?
    Thanks!

    bhtrout,
    Try going to the menu bar in Mail, click on View/Columns, make sure that Attachments is checked (click it) It should put a column with a papper clip icon at the top of your in box.

  • How can I see the whole screen on my original iPad, without having to scroll up or down.  Something changed and I don't know how to get it back.  I don't have a computer to hook it up to.  Thx!

    My front screen seems to zoom in when I start it now.  AND, now I can not see the page fit the screen.  It makes me scroll on the borders to move parts of the screen into view.  Something changed and I don't know what happened or how to get it back to normal.  Please HELP!!!  Thx!

    it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
    or you can go into settings>general> assessability> zoom and turn it off.
    hope this helps

  • My iPhone is saying its taking up 10g of photos and I only have 154 pictures. Also when I got my screen fixed I had 2,000 and when I got it back I had 0 but my wallpapers remained.. Very strange. It's as if my phone still has the pictures but I can't see

    My phone is saying all my storage for pictures is taken up when I only have 154 picture.. It happened when I got my screen fixed at a kiosk in a mall and I had 2,000 pictures when I gave it to him and when I got it back I had 0 but my wallpapers remained.. Very strange it's as if my phone still has the pictures on there.. But I can't see them. Anybody know what I should do :( I keep having to delete apps because I have no more storage for no reason :(((

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

Maybe you are looking for

  • How to set up E72 mobile VPN?

    how to set up E72 mobile VPN? I am using nortel vpn at work, is it possible? I dont know how to set the policies.. =S

  • Parameter index move while executing PL/SQL stored procedure/function

    Hello, community. Have a question for you. It looked like very easy to write some small JDBC-wrapper to handle stored procedure/functions call for Oracle. Here is the code snippet of it: import java.io.Serializable; import java.sql.CallableStatement;

  • Mail not saving signatures

    I just added two new email accounts. When I add the signatures for these accounts it adds them just fine, they show up in the right header signature box, everything works just fine...until I close mail. When i reopen the signatures are still in the '

  • T400s heat at the bottom of the display frame

    recently, i noticed that the center bottom of the display frame is very warm, while the other parts are quite cool. is this related to the driver of the graphic card? I recently installed tha driver provided by Lenovo (ver. 8.15.10.1855). before this

  • New PCR writing

    Dear Consultants, Can any one help how to write PCR as per below screen shot, As am new creating PCR i need your help. Thanks in Advance Naresh