Can't see the external disk attached to the TC!!!

Just bought a TC 1TB today. I put a WD 500G external disk to the usb port of the TC. And i found it ways lost the connection to the WD when i see the two airpot disk in my finder. TC's internal disk is fine and never lost, but i sometimes i can not find my WD external disk unless i unplug the power and plug it back again....
Any one can help?

In Finder preferences, is the box checked that permits the drive to be seen?

Similar Messages

I can't see my external disk source when trying to migrate data using the Migration Assistance.

I have an external hard disk (Lacie) with all my backed up data. After doing a clean install of Mavericks I now want to migrate my data using the Migration Asistance but it is not able to find the source.
Can anyone help please?
Thanks.

Is the layer's visibility check box turned on or off? What is the layer's Blend Mode? What is the format of the original file?

WRT1200 Network error when paying music from external disk attached to the Router

Hi everyone, I have one problem with my new WRT1200AC wireless routerFrecuently network errors when playing music from external USB3 disk attached to WRT1200AC Any idea to solve this problem Thanks in advance Regards, Rod

Wireless Configurations
Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
What wireless modes are you using?
Try Mixed mode, single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&respid=0&snid=4&dispid=0&cpage=search
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only.
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0Rod2 wrote:
Thanks I play music fom external disk attached to the router from my internal netwok. No Internet traffic. The network error occurs between a notebook and the router in my home network Thanks Rod

I created a new home folder on an external but didn't move my old files over. Now I can't see the old hard drive in my mac mini. How can I locate that drive?

I wanted to move my home folder to an external drive. I created a new home folder and in advanced options I moved it over. I didn't however move my files over first, my bad. Now I can't see the hard drive on my mac mini. Is it possible to reverse it or get access to the old home folder and is it possible to still use the mac mini's internal hard drive for storage? How do I find my shared folder, it was on the internal drive. I'm new to macs as you might have guessed at this debockle. Can anyone help?

I'm using Mavricks. I wanted to move my home directory to an external and went into sys prop/users/advanced options and moved the folder ok. Being a noobie on Macs I didn't copy my data and such. So my settings were all new. Basicly now I don't see the internal drive on my mini. There is a lot of strage I'm not able to access. The internal drive doesn't show up. How can I put a folder back onto it so it shows up?

I can't see my external hard drive on the network.

I can't see my external hard drive on the network. I have a WRT160NL router with USB. I plugged the drive in the USB and set up a share in the router config.

Did you map the drive? It won't show up in Explorer automatically like a jump drive or an external drive plugged directly into the PC will.
You didn't mention the OS you're running, but what you want to do is choose "Map a network drive" and you'll see the router listed as a network device. Click on it and you should see the external drive listed. You can map it from there.

Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
Tek

This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

I bought a new super zoom lenses for iphone which is attached to the iphone but you can still see the outside of the lenses through the viewer

I purchased on-line a new Super Zoom for my iPad and iPhone. when I attached the iPhone lense to the iPhone, there seems to be a problem with the view. You can still see the outline of the lense and it is not a clear view looking through. Can you hep

Only the carrier can officially unlock it for you

I can't see the files on my USB disk

I know there are about 250 million threads about airport USB disk problems, but I can't see one with my specific drama.
I can connect, see the drive (its a LaCie 250GB) and move stuff to it via the airport. The problem is that I cant see the files once they are on the LaCie. The finder window will start to show each folder but after about 1 second all the folders dissapear and the finder says "0 items, 91.38 GB available".
Obviously the computer is reading the drive as it knows how much space is on there, and it can write to the drive - it just wont display the folders. If I connect using a USB cable then all is well, so its just the ***** airport!
Someone please help, I'm going mad!

The disk sharing utility creates separate folders which are not visible when connected to the AEBS, but are when directly connected via USB to your computer:
"Shared" > for all mainly shared files and folders
"[Username]" > for all user related files and folders when you use account to access your disks through the AEBS via Airport.
So if you first connect your disk directly to your PC, make sure you copy your files to the "Shared" directory (and not directly in the root), and if you did not connect the disk to the AEBS before, or the "Shared" directory does not exist, make this folder yourself.
Goodluck!

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

Was the entire folder copied including the iTunesLibrary.itl file?

I can't see the Attachment

I can't see the Attachment for exemple .doc archives in Mail (Lion 10.7.2 - Mail Versão 5.1 (1251/1251.1).
I can see the Attachment only from de yahoo web site.

I am having the same problem. As recently as this morning, I could read entire hotmail emails on my iPhone 4 now, I can see only the sender & subject. What us up? Any solutions? Thank you.

External table, can't see the file

Hi
--This is what I do
CREATE OR REPLACE DIRECTORY data_dir AS 'C:\TEMP\'
GRANT READ, WRITE ON DIRECTORY data_dir TO my_user;
--I have my actual GAS.TXT file in the folder, the file looks like this
0003450305NG-5E6, TUSCANY VILLAS,26 FENTON STREET ROTORUA 3201, ROTORUA
002343043NG-9DE, LORALIS LIMITED,18 HARINGTON STREET TAURANGA 3001, TAURANGA
...etc...
--I do a select
SELECT * FROM all_directories
--and it shows
SYS DATA_DIR C:\TEMP\
--Then I create my ext table like this
CREATE TABLE external_table(
ICP CHAR(10) ,
NAME CHAR(20),
ADDRESS CHAR(30),
CITY CHAR(20)
ORGANIZATION EXTERNAL
( TYPE oracle_loader
DEFAULT DIRECTORY DATA_DIR
ACCESS parameters
(RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"' AND '"'
(ICP CHAR(40),
NAME CHAR(100),
ADDRESS CHAR(100),
CITY CHAR(100)
location (DATA_DIR:'GAS.TXT')
--The table is created
--then when I try and do a select I end up with an error message
SELECT * FROM EXTERNAL_TABLE
ORA-29913 blah, blah
ORA-29400 blah blah
KUP-04040 file can't be found
ORA-06512 SYS.ORACL_LOADER
ORA-06512 blah blah
So, I reckon of some reason it can't see the file, but I do not know why?
The file sits on the Server in the C:\TEMP folder and the error log ends up in the C:\TEMP folder
I have tried several variations on this, but still same error. However, then I also tried these exact same scripts on another Oracle box, and it worked fine. So something with the machine/box I am using is not alright.
Would appreciate your thoguhts.
Thanks
Kari

As suggested, change your table definition to match the available data, and post an example like below with complete error message (not the edited version that is hard to understand).
SQL> $ type c:\temp\gas.txt
0003450305NG-5E6, TUSCANY VILLAS,26 FENTON STREET ROTORUA 3201, ROTORUA
002343043NG-9DE, LORALIS LIMITED,18 HARINGTON STREET TAURANGA 3001, TAURANGA
SQL> CREATE OR REPLACE DIRECTORY data_dir AS 'C:\TEMP\'
2 /
Directory created.
SQL> CREATE TABLE external_table(
2 ICP CHAR(16) ,
3 NAME CHAR(20),
4 ADDRESS CHAR(35),
5 CITY CHAR(20)
6 )
7 ORGANIZATION EXTERNAL
8 ( TYPE oracle_loader
9 DEFAULT DIRECTORY DATA_DIR
10 ACCESS parameters
11 (RECORDS DELIMITED BY NEWLINE
12 FIELDS TERMINATED BY ','
13 OPTIONALLY ENCLOSED BY '"' AND '"'
14 (ICP CHAR(40),
15 NAME CHAR(100),
16 ADDRESS CHAR(100),
17 CITY CHAR(100)
18 )
19 )
20 location (DATA_DIR:'GAS.TXT')
21 )
22 reject limit unlimited
23 /
Table created.
SQL> select * from external_table ;
ICP              NAME                 ADDRESS
CITY
0003450305NG-5E6 TUSCANY VILLAS       26 FENTON STREET ROTORUA 3201
ROTORUA
002343043NG-9DE LORALIS LIMITED      18 HARINGTON STREET TAURANGA 3001
TAURANGA
2 rows selected.
SQL>Message was edited by:
Kamal Kishore

I can´t see the attached itens in my e-mail (at Mail app).

I have the new Ipad, and when I receive an e-mail with an attached archive it not give the option to open it. I can´t see the archive. Does anyone know what is happening?

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

I have MacBook,the disk is already full.when I open it I can't see the icons below.im trying to delete my files but I can't...

I have MacBook,the disk is already full.when I open it I can't see the icons below.im trying to delete my files but I can't...what should I do?my screen shows only color blue screen and apple icon,file,edit,view,share,window and help on the upper left of the screen...

If she can't remember the ID/password, she will need to go to https://iforgot.apple.com to recover it/reset the password or she will have to call Apple and speak to someone in account security.

I recently changed my PC and I transferred my iTunes music library to an external disc. Now, when I open iTunes I can only see the music I've downloaded, but not the rest of my music. Whatdo I need to do?

I recently changed my PC and I transferred my iTunes music library to an external disc. Now, when I open iTunes I can only see the music I've downloaded, but not the rest of my music. What do I need to do?

PDMex wrote:
I recently changed my PC and I transferred my iTunes music library to an external disc.
Did you transfer the entire /Music/iTunes/ folder?
Or did you only transfer /Muisic/iTunes/iTunes media? folder?

Iphoto can't see my external drive

Hi,
I want all my photo's from Iphoto to go on an external drive I have. But if I click on Export and have to chose a place then I can't click on my external drive because it's not there on the list on the left side...
Is there an other why to move all my photo's to my external drive?

The question should be 'what's wrong with the external drive'
Can you see it in other programs? can you see it in Disk Utility?

Can't see the external disk attached to the TC!!!

Similar Messages

Maybe you are looking for