Can't see the import clip on the monitor

Hi,
I tryed to import from my Sony HDV cam. The tape is running but nothing is happening in I movie monitor. The time code in Imovie is still.
I am using a Ilink firewire cable

I quote QuickTimeKirk:
”Open the Audio MIDI Setup application (Utilities folder).
Try changing the settings to 44100Hz (CD Quality) or to 48000Hz (typical of the iMovie formats).
Others call this the GarageBand fix. Opening GB also resets the Audio MIDI Setup.”
If that is too hard ..just do this!
*Open GarageBand
*Play a few notes
*Close Garageband
*Open imovie
*Camera should be recognized now.
:)Sue

Similar Messages

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • HT1338 I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

    I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

    Here's freeing up disk space.
    DALE

  • I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files  Tried to do as a backeup t

    I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files 

    I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
    If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
    regards

  • How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

    How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
    It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

    Jayhawk
    I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
    Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
    ATR

  • I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

    i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • Why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

    Hello. do you know why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

    Photo stream photos are only kept in photo stream for 30 days, although up to 1000 will remain on your device until you delete them.  When you connect a new device to your photo stream it will only receive photos added in the last 30 days as the earlier photos are no longer there.  Chances are, the missing photos were more than 30 days old.
    If the missing photos are on another device, you could create a shared photo stream including the missing photos and invite yourself, as explained here: http://help.apple.com/icloud/#mmc0cd7e99.  You would see then be able to access the photos on your new phone.  Another option is to import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your new phone using iTunes.

  • Can't see who has replied to the thread in the forum, its pointess?

    What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
    Surely before you release such garbage you test for these very simple issues, right?
    osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

    It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
    Latest reply: May 3, 2014 2:17 AM by . osgood_
    The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
    9 minutes ago in Dreamweaver support forum
    Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
    If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
    And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
    Plenty of teething issue you need to get your head around over the next few weeks.

  • I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

    I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

    Another View.
    the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

  • Why can i see only one picture in the illustration windows with iTunes 10.5.1?

    why can i see only one picture in the illustration windows since iTunes 10.5.1?

    Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
    I've developed a quick workaround, and am still hoping Apple will fix this!
    Go To Get Info on the tune you want to see secondary artwork for.
    Go To the Artwork tab
    Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
    you end up with a lot of jpgs on the desktop to discard!

  • I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?

    I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?

    SinluFrank wrote:
    already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?
    Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
    However ....  I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
    Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

  • My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • In iMovie, I can't see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4

    in iMovie, I can’t see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4
    also, if I want to use a picture in my movie, it says 'Open iPhoto to see photos from your iPhoto Library in this list.'
    It never use to do this.

    JimHdk,
    thanks for your reply, but why I could wtach the videos on land mode using the ios 6 and why I can't watch them using this new ios 7 on land mode?
    i give you the name of the videos :  BJJ OPEN GRD, BJJ THROWS 1, BJJ THROWS 2, BJJ ChoKes, BJJ SWEEPS,
    I work with this, I study watching the videos, and please, I need to resolve this,
    thanks JimHdk for you help and cooperation

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive but many are not showing up in Aperture.

    Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Maybe you are looking for