Can't see the "plus" sign on calendar and reminders after ios5 update

Since I have update my iphone 4 I can see the "+" sign on the calendar and also on the reminder app. Also when I go to settings and into mail / calendars the phone screen tends to freeze! I have restored the phone twice but that has not solved the problem.
Any solutions would be greatly appreciated.
Was thinking if I want to redownload the ios5 update and reload / restore. Thanks.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Similar Messages

I can't see the "plus" sign in my upper right corner ind the calendar!?

I can't see the "plus" sign in my upper right corner ind the calendar!?

In my database connection i can`t see the plus sign on the
database tab.
Not quite clear to me what you mean by that. In any case, you
should configure the data source in the Coldfusion Administrator.
Open the CF Admin page,
http://127.0.0.1:8500/CFIDE/administrator/index.cfm
. Go to the
Data Sources section. Create a new datasource, for example,
by entering the following
Data Source Name:
eventplanning
Driver:
Microsoft Access with Unicode
Press the
Add button. Enter the value
Database File:
C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\eventplanning.mdb
Press the
Submit button. Coldfusion will then verify the connection to
the database. Confirm that its status is
OK. If so, the eventplanning datasource is configured for
use in your Coldfusion application.

Can`t see the plus sign

Hi,
In my database connection i can`t see the plus sign on the
database tab.
My local root folder is:
C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\
remote: C:\CFusionMX\wwwroot\
testing server: C:\CFusionMX\wwwroot\
I placed the database in here:
C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\eventplanning.mdb
can anyone help me.

In my database connection i can`t see the plus sign on the
database tab.
Not quite clear to me what you mean by that. In any case, you
should configure the data source in the Coldfusion Administrator.
Open the CF Admin page,
http://127.0.0.1:8500/CFIDE/administrator/index.cfm
. Go to the
Data Sources section. Create a new datasource, for example,
by entering the following
Data Source Name:
eventplanning
Driver:
Microsoft Access with Unicode
Press the
Add button. Enter the value
Database File:
C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\eventplanning.mdb
Press the
Submit button. Coldfusion will then verify the connection to
the database. Confirm that its status is
OK. If so, the eventplanning datasource is configured for
use in your Coldfusion application.

I'm trying to add a contact, but cannot see the plus sign. How do get to that screen?

Hello, I'm trying to add a new contact to my Ipad 2 manually, but do not see the plus sign. I added one contact, now I can't seem to add anymore. The Manual refers to making sure I'm in the correct view, but I'm not sure what that means. Any help would be appreciated!
Thank you,

I haven't read the manual so I 'm not sure what "correct view" is referring to. When I add a contact there's a plus sign at the bottom left hand page.

How can I see the whole week with calendar built-in app ?

How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

What you see is what is available.
Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

HT201272 How can I see the whole week with calendar built-in app ?

How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

You have posted in the itunes store forum. This has nothing to do with the itunes store.

How can I match the plus sign in a regex or indexOf statement?

How can I match the plus sign in a regex or indexOf statement?
I've tried
String.indexOf("\\+");
String.indexOf("+");
String.indexOf("\\\+");
and
String.contains("+);
String.contains("\\\+");
Thanks.

String str = "abc+123";
System.out.println(str.indexOf("+"));
System.out.println(str.contains("+"));works for me.
Mark

Goo night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good morning,
Thanks for your message, the versions are LR 5 and PS6
2015-02-24 21:31 GMT+00:00 John Waller <[email protected]>:
Goo night, I have Nikon D810, and i can not see the raw photos on
lightroom and Ps, could someone help me? created by John Waller
<https://forums.adobe.com/people/John+Waller> in Photoshop Lightroom - View
the full discussion <https://forums.adobe.com/message/7226636#7226636>

I use aperture 3 since a long time. Using slit viewer, now the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How ca

I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?

This lloks like your preferences file might have become corrupted.
you probably have a problem with corrupted user preferences.
Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
Quit Aperture, if it is running. Log off and on again.
Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
In the widow that will open, scroll down to "Preferences"
From the "Preferences" folder remove "com.apple.Aperture.plist".
Then try to launch Aperture again.
But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
Regards
Léonie

My daughter has an iPod touch and is emailing a much older boy via text free app she downloaded. How can I see the conversations? Please help and thank you

Please help me...My 12year old daughter has been talking to a older teenager through the text free app. How can I see the conversations? Also, there is a photo vault that is locked. What is that? Please someone help me. I don't know what else to do. I paid and downloaded a program that is supposed to tell you everything that's on the ipod but that was a joke. Thanks for your help.

As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
Try talking first

Can't see the java sign on the address bar

I need to enable java to see a web page but there is no java sign on the address bar. Something has changed because I used to be able to see the web page before

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript (Java and Javascript are seperate! see: http://kb.mozillazine.org/JavaScript_is_not_Java) was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
*[https://addons.mozilla.org/firefox/addon/settingsanity/ SettingSanity] (adds back JavaScript options, including Advanced JavaScript Settings, as well as options for loading images and showing the Tab Bar)
Thank you and I hope this helps!

Why I can not see the plus + to add a contact

After I updated my iphone I can not add or delete contacts. The + sign is not there.

Reset the device and try again > Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

I'm seeing the "No" sign on Startup, and my internal drive doesn't show up.

Good day to you all. It's my first post here and I come to you in desperation.
Last night, i was browsing the internet and syncing my iPhone. Suddenly my iMac froze and there's no way to restart it but to press the back button. Upon restarting, it showed me the Apple logo then a few minutes more it showed me a "No" sign (ie. No Parking circle.) Noticing that this is a serious one, I pulled out my Snow Leopard installation disc and restarted the system. Last night, I managed to see the internal disk listed in Disk Utility, but it's in red. The partitions (Mac OS X and Windows XP via Boot Camp) can be seen but cannot be accessed. Desperate and tired, I slept the night off.
This morning, I tried my luck again. Fired up the iMac with SL inserted, opened up DU, and my internal drive is not in red anymore. I managed to open my Mac but I really noticed the sluggish performance. A couple of hangs later, I had to restart again using the button at the back, and there it was again: No sign. But now it's even worse. I can no longer see my internal drive in DU. Tried almost everything: resetting the PRAM (holding the X button) and pressing the C with SL disc inserted just doesn't cut it. The odd thing though, is when I press the Option key upon startup, I can see all the partitions (Mac OS X, Windows XP, Snow Leopard disc.) But upon clicking Mac OS X always ended up with the "No" sign.
I'm really desperate since I although I'm using Time Machine, I know I exempted some folders in there. Can you suggest some more instructions to make my internal drive show up? Is there a Terminal command of such kind for it? I hope my drive is still okay since I can still see all of the partitions via Option.
Any help is appreciated. Thank you so much in advance!

kaloyster,
Welcome to Apple Discussions.
From what you are describing it looks like your HD has either fully failed or is failing. I would suggest taking it in for service. The good news is you have been using Time Machine so you have a backup of most of your system. As you may know TM does not backup any MS Windows data.
If your machine is still covered by warranty or AppleCare this should be pretty painless. If you are not covered by either then just contact an Apple Authorized Service Provider and bring it in. The contact information in your country is:
Philippines 1-800-1441-0234 www.apple.com/asia/support/
Regards,
Roger

ISA contact can not see the Order made on oneSoldto and can check for other

Hi All,
i've one peculiar prob...in which assume X is the ISA contact person for two sold to parties Y and Z.where as the role is the same for X he cd able to check the orders he created for Y and cd not able to see the same for Z.please let me know how peculiar is the prob and what cd be the reason for this.
Thanx in advance,
Sarath

Hi Sarath,
How is the contact person X entering the webshop? I mean before entering the webshop the list of customers Y & Z for X will be displayed for selection. If contact person selects Y then he only be able to see Y orders and not of Z. This is a very much standard process in ISA. If you want to show both Y & Z orders then you need to modify the ISA functionality. Or in CRM5.0 ISA you can achieve somewhat similar functionality by using customer hierarchy functionality.
<b>Reward if helps,</b>
Regards,
Paul Kondaveeti

How can I see the combined result of primary and secondary color correction in the vectorscope

Hello there,
so I can't figure out how to see the combined result of all the color correction I did on a shot. If I click on each individual layer (primary or each individual secondary) I can see the result of each one individually on the vectorscope, but I want to be able to see the final result of all the layers combined. Is this possible within speedgrade?
thanks in advance for the help
Luc

Occasionally SpeedGrade seems to forget itself or something. It's kinda weird/funny, but ... on occasions I have been working and say one tab just stopped responding when I clicked on it, but everything else was fine. Shut it down, come back into it ... all is righteous. Thankfully I've not had some of the major bonkers-responses some clearly have. I'm sure that will come also. This is an incredibly complicated and complex program under the hood, of course. But all in all ... I do love working in it.
When I have the excuse to do so ...

Can't see the "plus" sign on calendar and reminders after ios5 update

Similar Messages

Maybe you are looking for