Can't see the record levels

Hi All,
Brand new newbie here. I'm sure this question has been answered here but I'm not even sure how to search here for the answer.
I have Presonus Firebox. I was following the GB help video to record voice. I plugged my microphone into the Presonus Mic/Instrument 1 channel. Chose Mono 1 (Presonus Firebox) from the Input Source. I couldn't see any record levels on the track but tried recording anyway. GB actually recorded the voice since I could play it back and hear it. Also, if I look at the track its just a flat line.
How can I see the input levels on the track and see the the wave shapes on the track?
Thanks in advance for your help.
The Fudd

OK. Got it figured out. Looks like I didn't have the volume up high enough on the Firebox to register either on the UV meter on the track or to see the wave profile when recording.

Similar Messages

Can't see the Supply Levels with Canon PIXMA ip4200

Have tried downloading the latest drivers from Canon and used various other drivers but can't see the Supply Levels. Was OK with my Windows machine, but have now seen the light and use an iMac.
I am also having some issues when trying to print borderless with iPhoto, and think these problems may be related.
Any suggestions?

In testing iPhoto, I can see what you are getting. With the photo size at 4 x 6 you only get two photos per A4 sheet, even full bleed.
Thinking about this, I wonder how the Windows application would have been fitting four to a page. A4 is 210mm x 297mm. A 4 x 6 inch photo is 101.6mm x 152.4mm. With the longer edge of 152 mounted inside the 210mm, there's roughly 50mm left. And in the vertical the photos use 203mm leaving 94mm. Not much room for another photo, let alone two more.
Doing the maths, four photos without borders would require a surface area of 203.2mm x 304.8mm. So there would have to be some image loss, or size reduction, even on a full bleed A4 print.
If you want four to a page, then the 3 x 5 print size will do this. But if you want 4 x 6 inch prints, then the default settings in iPhoto are not going to let you do it. And I can't find a way to override these default settings. Maybe there is another application that will let you do what you want.
Regards,
PaHu

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

When record audio I can`t see the graphical overview of the waveform.

When record audio I can`t see the graphical overview of the waveform.

In the Arrange Window at the bottom; click on Sample Editor:

Can we see the actual Tables using Record History through forms

By using record history in Oracle Financials it shows only the associated view can we see the actual table using that record histoy
Thanks a lot

Thanks Kiran
Actually i am new to Oracle Financials Technical side i have experience in Oracle field and want to work technically on apps side so i need to have check which form is on which base table and wats the relations etc thats why i am serching from front end the actual tables info
Anyhow Thanks

Why can't I adjust the recording level for a Blue mic???

Why can't I adjust the recording level for a Blue mic???

Most Blue usb mics have a gain control somewhere on them.

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Why I can not unlock the record when close a page?

I develop a jsp page as client,the jsp application use a business componment with statefull application module.i call a database rowset's lock function in jsp page to lock a record,now,after i close the jsp page without commit and rollback,the record is not unlocked,until i restart the oc4j application server.how can i unlock the record when close the page without commit and rollback?????

Li Ping:
If you lock a row in the course of a transaction, you cannot unlock the row until the end of transaction (either rollback or commit). DBMS doesn't allow this.
Alternatively, you can try to delay locking of the row. E.g., you can try using optimistic locking. Please see the Java Doc for oracle.jbo.Transaction if you're interested in optimistic locking.
Thanks.
Sung

Can't see the ESS Additional Personal Data link within Personal Information

Hi All,
For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
I would really appreciate if you could provide an answer to my query.
Thanks,
Vibhu

Hi,
I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
After this try to check with your EA-HR patch and SAP HR patch in the services. If both are not maintained at the same patch levels such type of problems will occur.
Regards,
kishore.

ICal error - can't see the calendars on opening...

iCal error - can't see the calendars on opening... unless i change the view - but then still the portlet in the top left hand corner remains blank.
Re-installed the whole OSx system from original disks and still the same problem.
cleared out the cache files, including trying to delete the metadata files... taken to my local Apple Centre (Academy) but no sucess so far.
Any ideas? Is it because i have around 8 calendars? Is that too many?
Could it be 'cos I sync with Missing Sync for my Palm TX?
H E L P !!
Powerbook G4 Mac OS X (10.4.7)

When a user launches iCal, they may have one of the following symptoms:
* When iCal is launched the calendar is blank -- no calendars are listed on the left and no events appear in the day/week/month views
* Switching views allows all events to appear but the calendars on the left are still missing
* User can create a new event and designate a calendar but when the event is saved it cannot be seen
* Clicking in the blank space where the calendars are supposed to be has no effect.
This issue is a Sync Services issue and not directly related to The Missing Sync. Mark/Space has identified a couple of solutions to this problem that others have reported. For more information, see: http://www.macfixit.com/article.php?story=20060207074628694
1) Quit iCal
2) Locate the folder, User/Library/Application Support/iCal/Sources/ and delete the contents
3) After deleting the files from this folder, lock the "Sources" folder. Do this by navigating up one level and selecting the "Sources" folder. Perform a "Get Info" (either through the "File" menu or by pressing Command-I with the "Sources" folder selected) then click the lock icon.
4) Launch iCal and your calendars should reappear. Note that the relaunch of iCal will create a default 'Home' and 'Work' calendar, so make sure none of your calendars have the same names as the default .
Do some backups first
Follow those simple steps
5) Go to Address Book, click on 'File' menu and choose 'Back up Address Book'. Go to iCal, click on 'File' menu and choose 'Back up database'.
6) Go to Missing Sync and double click on the Backup Conduit and set it to backup all databases. Then run the sync with just that Backup conduit selected, disable all other conduits.
7) Go to: /Users/<user name>/Documents/Palm/Users/<hotsync name>/ now hold the 'ctrl' key and click on the /Backups/ folder. Choose the option to 'Create Archive of "Backups"'. This is to safeguard your backed up data in case anything goes wrong.
Now 'Reset Sync History' using the iSync preferences option. The first sync will likely be slower.
8) Launch iSync
9) Click on the iSync menu
10) Choose Preferences (make sure the "Enable syncing on this computer" is checked)
11) Click the 'Reset Sync History' button. Read and follow the onscreen directions.
12) This may launch iCal. Also the status of the reset is showing in the iSync display. When the reset is complete quit both iSync and iCal.
Launch Missing Sync and enable the Mark/Space Events and Tasks conduits and set them to Desktop overwrite Handheld. Disable all other conduits.
Then sync, when you do, you will get a dialog box with an orange iSync icon on it. Check the box to erase the device, then click the 'Allow' button. It will overwrite your device. You will get one for events, one for tasks, and one for contacts. The next time you sync .mac or other devices that sync with iSync like an iPod, you will get these same dialog boxes for their databases and you should check the box and click 'Allow' in those cases as well.
If you press the don't allow button you will need to reboot your computer.

How can i see my ink levels

how can i see my ink levels on my printer PHOTOSMART 5510

From the home screen of the printer you can press the right arrow button, and then press on the third icon that looks like ink. This will then display the estimated ink levels.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How can i see my kernel level patch.

Dear Friends,
How can i see my kernel level patch.
sach

Hi sachin,
When you logon to the SAP system you will get SAP Eassy Acess screen.
In that screen menu bar click on SYSTEM->STATUS->OTHER KERNEL INFORMATION(shift+F5).
I HOPE IT WILL HELP YOU.
KIRAN

How can I see the relationship of tables in Microsoft SQL Server?

How can I see the relationships of the tables? Exactly like what we see in Access. In Access if we select Database tool and then relationships, we can see how the tables are linked to each other. How can I find this option in SQL Server Management Studio?
Thanks,
GGGGGNNNNN
GGGGGNNNNN

Thanks,
I could verify what you explained here. how can I overcome this message and resolve it when my database owner is not there:
Message while starting with database diagrams of a attached/restored database
If you have just attached/restored a database from another SQL Server instance. While accessing its database diagrams folder, you may get the following message
It is an informational message and would prevent you from working on database diagrams. The message says that your database has no valid owner currently. Reason for this error is that database owner on a previous SQL Server instance does not exist here.
To overcome this error just add the valid database owner through T-SQL or SSMS. Also verify the compatibility level of your database is correct for your SQL Server instance.
I appreciate your help.
GGGGGNNNNN
GGGGGNNNNN

I can't see the 'search' option on this site. Am I the only one?

I'm having an issue with DVDSP and I can't see the 'search' option on this site. Is Apple cutting down on bandwidth for this so they can sell their phones?!
Anyone else having the same issue?

frmrt wrote:
http://discussions.apple.com/ann.jspa?annID=639
frmrt wrote:
http://discussions.apple.com/ann.jspa?annID=639
+Good afternoon,+
+We have temporarily disabled search and status levels to improve performance of Apple Discussions. We expect this to be a temporary measure.+
Regards,
Mark
+Apple Discussions+
What the **** does this mean? The performance was just fine! Now, I am unable to efficiently search for information and the performance therefore is awful. How long will this go on?

Can't see the record levels

Similar Messages

Maybe you are looking for