Can't see the screen!!!!!!!!!!

When i'm in the sun i notice that the screen is really really reflecti've and i can't see the screen at all, not that it's broken or anything. Anywhoo anyway or trick to fix that because i wanna change tracks when i'm outside.

Which player do you have? Sometimes a screen protector can help if you feel the angle or reflection is not to your liking.
Cat

Similar Messages

  • My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

    My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything,  I have a child that is very ill and I have to have access to a phone at all times can someone help me?  It happened one other time when I plugged it in to my to listen to music.  I know it is working it said something on voice control.  I tried the press the circle button and the top button but the screen only turned white?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My iphone 4s is working but I can not see the screen.

    my iphone 4s is working but I can not see the screen. What is going on?

    Possibly backlight died, if you look at it closely in bright light can you see a "Shadow" of the screen image?
    First, back up your phone
    http://support.apple.com/kb/HT1766
    Then, restore the OS from scratch
    http://support.apple.com/kb/HT1414
    If that doesn't work, you'll need to have the phone serviced
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • After my iphone got wet in the rain the screen is dim. I have put it in a tub rice for 36 hours but it as not improved. The phone seems to be working ok just can't see the screen.

    After my iphone got wet in the rain the screen is dim. I have put it in a tub rice for 36 hours but it as not improved. The phone seems to be working ok just can't see the screen.

    Thank you. I told it to the apple store in Southampton and they were fab. I was lucky and there was no water damage, the water indicators didn't change colour. It was just bad luck my screen failed at the same time as it got wet!! Screen changed and all is well. Thank you Genuis Tom and West Quay!!

  • My Computer is on BUT I can not see the screen to dark?

    My computer is on and I can the my front screen.  BUT it is too dark , so I can't see what to do.  I was having trouble and I had to reset the  PRAM.  Is this why I can not see the screen.  And how do I fix it?
    Jeanne

    I believe the keys on an imac are F11 and F12, for dark / bright respectively.
    Try that, I think it'll work.
    If not, then try out all the "F" keys, one of them will work.
    Ben

  • I just broke my iPhone 5 and can't see the screen. I haven't backed up my iPhone to iCloud yet. Is there a way I can remotely back it up so I can restore my new phone (once I get it) faster?

    I just broke my iPhone 5 and can't see the screen. I haven't backed up my iPhone to iCloud yet. Is there a way I can remotely back it up so I can restore my new phone (once I get it) faster?

    If you plug your phone into your computer you can sync and backup so that when you get the new phone you can restore from a backup instead of setting it up as a new iphone

  • Download photos from old phone, but can't see the screen

    Download photos from a LG Spectrum 2 that quit working, my contacts came over from whenever the last backup was, there were some of them missing as well.  I can't see the screen on Spectrum 2, but the power button light is illuminated if plugged into a charger.  My Spectrum 2 has an internal SD card, so not just as easy as obtaining from the SD card.

        prweaver2,
    I am sorry for the issues you are having. Without having access to the on screen prompts of the phone the media can not be transferred unless it was previously backed up somewhere such as the VZW Cloud or another 3rd party storage. If you would like you can try to gain access to the media by plugging the device into a computer and transfer the media however this many not be possible as you must enable USB Mass Storage on the device. Check out the steps here... http://vz.to/1Bfnlig
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • HT4859 I dropped my phone in the water can not enter pass word couse can not see the screen what can i do??

    I dropped my phone in the water can not enter pass word couse can not see the screen> what can i do?

    You're going to need a new phone unless you are very lucky. Take it to an Apple Store.

  • My ipad3 screen suddenly turned to white so i cant try any support here cuz  i already can't see the screen or find the i.d for the ipad, would the support contact me please

    my ipad3 screen suddenly turned to white so i cant try any support here cuz  i already can't see the screen or find the i.d for the ipad, would the support contact me please, would you please contact me
    <Email Edited By Host>

    There is no one from Apple here; we are fellow iPad user.
    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • My iPad screen is extremely damaged, I need to wipe iPad clean but can't see the screen. Can I control iPad settings through my pc/iTunes?

    My iPad screen is extremely damaged, I need to wipe iPad clean but can't see the screen. Can I control iPad settings through my pc/iTunes?

    You can try an alternative.
    This is the quickest thing that came to mind, but if you want to wipe it with no care of the data on the device at all:
    Place device in recovery mode (turn off device > hold home button + plug in to iTunes (WHILE HOLDING BUTTON)).
    iTunes will give you an error saying it detected a device in recovery mode, you need to restore to use device. Restoring device is a factory reset. AKA a wipe of the device
    article for recovery mode: http://support.apple.com/kb/ht4097

  • How can I reformat my hard drive on my MacBook Pro if I can't see the screen?

    The graphics card connected to the logic board on my old MacBook Pro is broken. Due to this the screen does not come on. I intend to sell my MacBook for parts. Before doing this I need to wipe the Hard Drive. How can I do this without seeing the screen?

    Thanks OGELTHORPE,
    Unfortunately I would not know where to start disconnecting and fitting Hard Drives!
    I did however manage to mount the old machine to my new MacBook. Then used the disk utility to earse the contents of the old drive.
    Cheers
    Connor_

  • Mini ipod - Can't see the screen

    I can hear the music but can't see anything on my Mini ipod screen. Tried troubleshooting, screen light appears but can't see the apple logo.

    Welcome to Apple Discussions!
    Have you tried resetting your iPod?
    http://docs.info.apple.com/article.html?artnum=61705
    You may also want to try syncing with the computer and restoring...
    http://docs.info.apple.com/article.html?artnum=60983
    btabz

  • I can't see the screen in the sun

    I've searched for an answer, but can't find one. I have a 8320 and I use the theme that came with the phone. I can not see anything on the screen when there is a lot of light (i.e. outside).  Is there a theme or some kind of setting I can use to help? This is very frustrating.  Thanks, Joe

    Hello icdifi26 and welcome to the forums!
    Have you tried turning off the "
    Automatically Dim Backlight" option?
    This can be found under Options-Screen/Keyboard
    I find if this is set to On I have a hard time seeing the screen in day light.
    Let me know how it works out!
    SR 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My iPhone 4 screen is very very dim.  Features work but I can't see the screen well enough for it to be useful.

    My iPhone 4 has a very dim screen.  I can barely see the icons and the phone responds to touch.  The phone is pretty useless other that as a phone to receive calls.

    Go into Settings >Brightness and turn 'Auto-Brightness' Off, then move the Slider all the way to the right to give you maximum Brightness. Does this make a difference?

  • I have a pavilion dv7 and i can't see the screen just dark

    Help,
    Is there a screen brightness key

    Hi,
    If you look closely, can you see any feint image?
    Try connecting the notebook to an external display to see if you then have video output.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • What is Sizing in XI ? How to do ? What is the Use ?

    Hi  All       I am learning XI ...it is excellent tool...more interesting       My Question is what is sizing  in XI ? How to that ? What are the advantages?       How to decide weather that project need sizing or not ?      More inputs on this pl...

  • BR0301E SQL error -27140 at location db_connect-2, SQL statement: DB13

    Hello All, We have ECC 6 with Database Oracle: 10.2.0.2.0 OS: HP-UX We are facing problem while running Check and Update Optimizer Statistics in DB13. The Job Log says Job started Step 001 started (program RSDBAJOB, variant &0000000000003, user ID LA

  • Issues with Azure South East Australia on Saturday @ 7am-8am Sydney Time

    Hello there Yesterday Saturday 10th of Jan @ approx 7.28am until 8am our CAS003AU virtual server was non responsive. It came online on it's own. This server is in the Azure South East Australia region.  I have checked your status pages and found logg

  • WSIT Client - missing nodes in Security tab

    Hello. Using NetBeans, I am trying to write a WSIT client against a non-WSIT web service that requires the request SOAP body to be signed. I was looking in: http://java.sun.com/webservices/interop/reference/tutorial/doc/Security2.html However, when I

  • G4 - RAID Rebuild Failure

    Hey all Just chasing some ideas. I've got a XServe G4 which was setup with a software RAID although before my time. It is running 10.4.8 Server. We had one of the drives fail, reported failed also with SMART reporting a failure. We have now replaced