Can't see USB disk drive from my Windows PC on my Airport Extreme

How do I configure the windows setting on my Airport Extreme so my Windows users can access it?

By default, when you enable "File Sharing" in the AirPort Utility, your AirPort Extreme will share out an attached USB HDD with either Macs or PCs.
To access the shared HDD from a Windows 7 PC:
Start > Computer > Map network drive
Drive: <use default or select a drive letter>
Folder: \\<AirPort's Base Station Name or IP Address>\<HDD's Volume Name>
User name: <Enter Base Station Administrator name>
Password: <Enter Base Station Administrator password>

Similar Messages

  • I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
    Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
    It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
    http://pondini.org/TM/18.html
    Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
    Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
    My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason.  At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups.  At that point, you can erase the USB drive and use it for another purpose.

  • Airport Extreme, can't see usb disk from media player

    I have a WD hard drive (formatted in FAT32) connected to my Airport Extreme. I can access it from my MacBook and I can see it under disks in Airport Utility. When I try to access the drive wirelessly from my Merlin media player (that's connected to my TV), the drive doesn't show up under the Airport Extreme Workgroup. I should mention that when the drive is plugged into my MacBook, I CAN access the drive on my media player under my MacBook's Workgroup. So I'm assuming the issue is with the Airport allowing the drive to be seen, and not the format of the drive itself. Can anyone help?

    By default, when you enable "File Sharing" in the AirPort Utility, your AirPort Extreme will share out an attached USB HDD with either Macs or PCs.
    To access the shared HDD from a Windows 7 PC:
    Start > Computer > Map network drive
    Drive: <use default or select a drive letter>
    Folder: \\<AirPort's Base Station Name or IP Address>\<HDD's Volume Name>
    User name: <Enter Base Station Administrator name>
    Password: <Enter Base Station Administrator password>

  • Can't see USB disk attached to other mac

    I have an Airport Express, on the network is a Mac Mini which has an USB disk attached to it (to the Mac Mini).
    However, I can't see the disk from any other mac that uses the Airport (this used to work)
    I've looked for "disk sharing" in Preferences and in the Airport Setup Utility, but couldn't find anything.
    I've also made the Sharing & Permissions of the USB disk for "Me" and "Everyone" as " Read & Write"
    Any idea how I can resolve this issue?
    Thanks,
    Awfers

    Ok, thanks for clarifying. You don't need to change any settings within the AirPort Utility, but let's double-check your Mac Mini's settings to make sure that it is both sharing the disk properly and that it's OS X firewall is not blocking the requests.
    For File Sharing: System Preferences > Sharing > File Sharing
    o Make sure that the folders on your external hard drive, that you want shared, are selected in the Shared Folders window.
    o Make sure that you have, at least, Everyone = Read Only set in the Users window.
    o Select Options..., and then, verify that you have "Share files and folders using AFP" is enabled for Mac clients, and "Share files and folders using SMB" is enabled for Windows clients.
    For the OS X Firewall: System Preferences > Security > Firewall
    o If "Allow all incoming connections" is enabled, verify that: "File Sharing (AFP, SMB)" is now displayed in the list.

  • Windows 7 can't see USB disk (WD Passport) on Airport Extreme

    I am needing some help. I just bought an Airport Extreme and everything is working but I can't see my files on the USB external drive from the Airport Extreme. I can see the drive inside of the Airport Utility but not over the network on my laptop.
    My laptop is Windows 7.
    I read somewhere that I may need to reformat my WD Passport but how do I do that in windows 7 and will I lose my files on the drive if I do this?
    THANK YOU SO MUCH for helping me!

    There are a number of posts related to issues between Windows 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
    To change the LAN Manager authentication level:
    o From the Vista desktop, click Start
    o Search for: security
    o Click 'Local Security Policy'
    o Goto Local Policies > Security Options
    o Under Policy, double-click 'Network security: LAN Manager authentication level'
    o Change level to: Send LM & NTLM responses
    o Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
    o De-select 'Require 128-bit encryption'
    o Click OK
    To disable Windows Search:
    o Start > Control Panel > Programs > Programs & Features
    o On the right-hand side, click "Turn Windows features on/off"
    o Scroll down, and de-select "Windows Search".
    o Press OK, close all windows and restart.
    A third "solution," that has worked for me, is verify that both the AirPort Extreme Base Station (AEBS) and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name.
    On the AEBS, you would enter this value on the Disks > File Sharing tab.
    On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

  • Can't print & can't see USB flash drives plugged in from Windows partition

    My uncle has installed Windows XP professional through Bootcamp on his new MacBook w/ Snow Leopard. He gets to it through Parallels. Everything works perfectly, except he can't print to the same printer that the Mac prints to, and also, when in Windows, the os won't recognize USB flash drives that are plugged into the MacBook either. He has the latest Windows printer drivers installed for the printer he is trying to print to and still won't work. He needs both of these up and running immediately. I convinced him to get a Mac. Apple fam...HELP!!!
    Thanks.
    Smartmediaman

    Hi,
    since Parallels is not an Apple product it would be ebtter to ask such questions in the Parallels support forum.
    Nonetheless:
    using USB devices: http://kb.parallels.com/en/5161
    using Printers: http://kb.parallels.com/en/4990
    Regards
    Stefan

  • System Image Restore can't see USB hard drive

    Hi
    I've just spent a day taking System Image backup images of three different hard drives. Well ok I didn't just sit and watch the bar move across the screen although it did hold up my computer. Anyway, what a waste of a day from my PC because
    when I try to restore using System Image backup from my USB drive, the USB drive cannot be found. I have followed the procedure on page 750 of Configuring Windows 7, 70-680 precisely.  I tried booting from an OS DVD and a Windows Repair
    DVD, but no USB drive.  I tried using a blank usb stick and that can't be found either. The USB drive can be seen when I logon to Windows to get the images on it. Might this be more to do with hardware such as adjusting BIOS boot settings,
    or updating BIOS firmware. There seems to be others with unresolved problems like this. Should I join them and buy Acronis instead?
    Tx

    Hi,
    Could you please check the following newsgroup posts for your answer. The posts lists different scenarios that might work for you.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    Best Regards,
    Kim Zhou
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Thanks for sending me these links and I will check them out. I think I came across most of the answer on the following link although doubts are raised: 
    http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-7-restore-from-image-wont-recognize/ce8e3d0a-236d-4eff-8370-c171d2dfa555?tm=1333929198413&page=1#footer
    Basically, I should have had three files on the external drive as follows:
    a.      A file named: MediaID.bin
    b.      A file that has the same named as your computer name (this is where the .zip files are located).
    c.      The 'System Image' folder named 'WindowsImageBackup'.
    By moving my backups into a folder out of the way and doing a fresh backup I prevented some confusion in the system. After this I could at last see the external drive and backup when doing a system image recovery. But how is
    it be possible to store more than one backup of hard drives on an external disk? The only way I know is by moving backups in and out of a folder which will take ages to do. Maybe I can rename the unused backups but this will get confusing
    because there are thee files to a backup and I think files are overwritten when doing backups if left in the route of the external drive. I is too easy to overwrite a backup of another drive by accident.

  • How can I see my network drive from time capsule on windows vista pc?

    I connected my Time Capsule 2tb to Windows PC and do not see the Network Drive for TC. I can see TC on my wireless MacProBook, but cannot see TC drive on the pc. What can I do on the PC to find Time Capsule's drive?
    Thank you.

    From the Mac as it is easier to use.. open airport utilty and go to the  disks, file sharing page. turn on the guest account.. give read write  access.. and make sure the TC is in the correct workgroup or type in the  work group name.. update the TC.
    In vista.. Open windows explorer.. in the address bar type \\ip\
    IP meaning the IP of the TC. . wait.. waiting wait.. windows scratches its bum.. thinks some more.. will finally kick up a username and password request.. type in whatever you need. Voila.. TC appears.

  • Can't see USB disk in Windows

    I have tried simply everything I can think of to use my Maxtor USB External drive. I can see it in the AirPort Utility, but no matter what, it won't appear in Windows explorer. I've even tried typing the IP of the airport express (using the default) - nothing.
    Any help would be completely and unabashedly appreciated.

    One more thing. Open your Airport Utility, (Start>Programs>Airport Utility), then click on your Airport device icon. Next, hit "Manual Setup". Enter the password for the device, if needed. Now, click on the Disks icon. Click on your Maxtor drive in the list, and see if there are any errors listed near that area (I don't remember what the Windows Airport Utility looks like). If there are errors, please list them here on the forum. If you are connecting to the Airport Extreme with a wired connection, you need to do this. While you are in the Disk section, click on the tab labeled "File Sharing". Make sure the check box labled "Enable file sharing" is checked, then also check the box that says "Share disks over ethernet WAN port". If none of these things help, please respond and tell me.

  • Airport can't see USB disk attached to it.

    I attached the disk to my iMac and had no problem seeing it. When I attach it to my AE-N I see nothing. Help.

    Called Apple and talked to a tech. As soon as I got him on the line, poof, the hard drive appeared in my Airport Utilitiy. I guess it just needed to hear his calming voice.
    Actually, I think what got it working is that I popped a jump drive into the USB port on the AE-N and that was recognized right away. After that, the hard drive was recognized.

  • Can i change usb device driver from windows 7 format to mac format?

    i bought an pcdvb xvision 3100.it has drivers for windows 7 .i have a macbook pro with mountain lion.how can i use this usb device on mac .please explain which app can do this to convert this driver or how with other ways?

    A Google search turned up this device as only being sold in Arabic countries - I can't tell for sure what it is: a stereo receiver? You're just going to have to check with the manufacturer to see if there is OS X support for the device.
    Clinton

  • How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    ...Called it a roaming network.  Wireless mode is create a wireless network. I have checked allow this network to be extended.  Probably need to uncheck that?
    Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
    The other important settings for a roaming network are:
    Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
    Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
    Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
    Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

  • Hi,  My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version.   I have the original version DVD with me.   But i am unable to install.   Can i create an USB installation drive from the DVD or can you please

    Hi,  My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version.   I have the original version DVD with me.   But i am unable to install.   Can i create an USB installation drive from the DVD or can you please send me a link to download the Middle east version of Adobe CS 5.5 design premium.   After downloading i can enter the product key which i had bought.  appreciate if anybody can offer a solution urgently.   All my jobs are held up. thanks

    Download CS5.5 products
    Mylenium

  • Access AirPort Extrems USB hard drive from Android

    I'm starting a new discussion because I erroneously marked my earlier discussion "solved".
    I've been using a USB connected disk drive on my AirPort Extreme from my Android tablet for years.  Since upgrading the AirPort to version 7.6.4 I can no longer access the disk drive from the tablet.  I have not changed anything on the tablet, only the AirPort.
    The tablet can see the AirPort itself as 10.0.1.1 and can see the attached disk drive, but when I try to access the drive I get a series of possible errors including Firewall issues,  SMB service is off or out of scope and WLAN is off.
    I don't know how to look at the firewall on the AirPort or check on the SMB service (I can't find either topic in AirPort Utility).
    I have tried a factory reset, and also reverting back to version 7.5.2 as suggested in the other thread, but I still get the same message when I try to connect.
    The drive is fully accessible from either of the two Macs on the network.
    Please help - I really need to access files on this disk from the tablet.  I konw Dropbox will work, but ti's cumbersome and I don't really want some of the files to live on Dropbox.
    Walt

    I would venture to say that the issue may be related to the AirPort firmware update not being compatible with the current version of firmware on your Android tablet. Of course, you probably already know this. I'm not aware of any incompatibilities between these two devices as Apple has not provided any information on this.
    As far as firewall on the AirPort, unless you are accessing the Extreme from a remote location its NAT firewall would be a mute issue. About SMB, this is automatically enabled when you configure the Extreme to share out an external USB HDD. So there is no setting to change there either.
    I have tried a factory reset, and also reverting back to version 7.5.2 as suggested in the other thread, but I still get the same message when I try to connect.
    If your Android was not having this issue when the Extreme was running 7.5.2 firmware, but is now after downgrading it to this version tends to make me believe the issuse may be with your tablet. Is there a potential firmware update for it?

  • Mount a USB flash drive from a shell

    I am about six months new to Linux; I have installed my first arch system but not yet installed a desktop environment.  I am trying to mount a USB flash drive from the shell but I am not having much luck.  I have tried following the instructions in the archwiki, http://wiki.archlinux.org/index.php/USB_Storage_Devices. I am having a problem with the following command:
    mount -t vfat /dev/sda1 /mnt/usbstick
    I get an error message saying that the mount point does not exist.  I have in the /mnt directory the following:
    cd cdrom dvd fd0 f1
    (I am not sure what fd0 and fl are, if somebody could please tell me I would appreciate it.  Also I do not have a DVD-ROM on my computer is the dvd listed by default or do I have a package installed I do not need?)  I did some searching online and came across the following site, http://linuxcommando.blogspot.com/2007/ … -from.html. I followed the instructions to identify the correct partition name corresponding to the USB drive by running the following command:
    grep SCSI /var/log/messages.log
    and I get the following results:
    Dec 30 22:16:17 morgan-desktop scsi2 : SCSI emulation for USB Mass Storage divices
    Dec 30 22:16:22 morgan-desktop sd 2:0:0:0: [sdb] Attached SCSI removable disk
    The next steps in the instructions are to mount the partition to the existing mount point (directory) by using the following command.
    mkdir -p /mnt/myusb
    mount -t vfat -o rw,users /dev/sda1 /mnt/myusb
    This is where I am having a problem, I do not understand the results and how to proceed to the next step, please help me.
    One other small question what is the best command to shut down the computer as a normal user?
    Thank you
    Morgan Smith

    Ok, Lots of different advice here, let's see if I can explain it all together, and clear up a few bits...
    I'll try to explain why I'm saying what I am, it doesn't matter if you don't follow it all, commands are below.
    You are on the right lines here, but a few things missing.  Firstly, to mount the USB stick you are using the correct command, but the locations are a problem.  The command is "mount -t type what/to/mount where/to/mount".   You can find out more about the mount command with "mount --help" or "man mount"
    You have correctly identified type as vfat - this means the pen is formated as FAT.
    To find out what to mount, you can check /var/log/messages.log, the second command you posted searches trough that file and prints out lines including the phrase SCSI, and the result tells you that a usb storage device had been attached as sdb, so the correct device is /dev/sdb1.  Storage devices are named sda sdb sdc etc in the order they are attached, and the numbers refer to the partitions on the disk.
    You can mount it anywhere you want, as any existing directory, but the one you tried to use /mnt/usbstick doesn't exist, so create it, using mkdir.
    The commands you need therefore are:
    mkdir /mnt/usbstick
    mount -t vfat /dev/sdb1 /mnt/usbstick
    This will work as root.  There is also, as byte said, a program called pmount (which you can get with pacman -S pmount) which works the same way for a standard user.
    Finally, there are also a number of tools like HAL which can be used to automate the process.
    As for shutting down, as has been said you must be root or in the power group, then you can use 'halt' 'poweroff' 'reboot' or 'shutdown'. All have slightly different effects, and poweroff is probably the easiest.
    Hope this helps
    Jack

Maybe you are looking for

  • Issue with richtables after file download

    Hello. Please help me solve the next problem. I have two tables (master-detail) on my page and a commandButton with af:fileDownloadActionListener assigned to it. After filtering tables i press commandButton and download Excel file with the content fr

  • ADF 11g + getting the user details in ADF BC layer

    Hello, I am using Jdeveloper build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.553 How to get the user name and roles in ADF BC layer? . I need to get the username in entity layer,view layer and am layer. Is there way to write common method to get the use

  • Legacy Data Migration - GL Open Items

    Source : SAP R/3 Target : SAP ECC Data to be moved : GL Open Items We need to migrate our Legacy data into SAP ECC. Tel me the efficient way to do data transfer. Any standard programs available for this ? Or any technique should I have to follow for

  • JTable + combobox

    Hi, I'm new with JTable. I've a JTable where I added a comboBox. I need to open a Dialog box by selecting an option from the comboBox. Please let me know how can I do that... thanks in advance. here is how I added my combobox code           //Set up

  • Can someone help with this problem?

    i was syncing my music and suddenly itunes decided to put 1000+ photos in my iphone that took about 4GB of my storage can anyone help me delete it?