Can't see USB printer option in Cisco Connect

Just fired up an e4200 router and was realy easy and everything working great HOWEVER I can a Canon MP490 printer that I have connected to the router via USB and Cisco Connect is only showing Wireless Printers as a connection option!!
I am on a MAC using OS X 10.7, have Cisco Connect Version 1.4 (12005.2) and the firmware updated today.
Any ideas?

The Windows version has an option for "Printers" that leads to options for a wireless printer and a USB printer after Cisco Connect Installation where as in Mac you will get the only option for wireless. Since, Cisco Connect does not have an added feature of providing USB printing with the MAC OX.

Similar Messages

Can't see the printer queue

Hi,
I can't see the printer queue in Snow Leopard.
Either if I go to the Printer & Fax setting in the System Settings and try to open the printer queue it doesn't open.

I have the same problem and I'd like to attach my issue to this thread.
I use a Brother HL5250DN printer connected via USB cable to an Airport Express base station. The model is supported by 10.6, drivers are installed and the printer appears properly on all the lists. I can print on it, I can set all the options, but I have no access to the queue whatsoever. I can print without problems, I just can't access the queue.
It doesn't appear in the Dock during printing.
Pressing the button in the Printer & Fax preferences window produces no result, error or feedback of any kind.
What's wrong? I tried reinstalling the drivers and the entire system, but without "Archive & Install" option I can't do much to ensure there are no left-overs from 10.5. Does anyone know a solution?
Thanks in advance.
Message was edited by: Krzysztof Zabko-Potopowicz

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

There are hidden pages in the PDF form I have. How can I see and print all without clicking on the

I have hidden pages in the PDF form I'm using (but didn't create). How can I see and print all the pages at once without clicking on the "next page" button. In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document. This is three budget years, each year being 4 pages long.

You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

I can't see the 'search' option on this site. Am I the only one?

I'm having an issue with DVDSP and I can't see the 'search' option on this site. Is Apple cutting down on bandwidth for this so they can sell their phones?!
Anyone else having the same issue?

frmrt wrote:
http://discussions.apple.com/ann.jspa?annID=639
frmrt wrote:
http://discussions.apple.com/ann.jspa?annID=639
+Good afternoon,+
+We have temporarily disabled search and status levels to improve performance of Apple Discussions. We expect this to be a temporary measure.+
Regards,
Mark
+Apple Discussions+
What the **** does this mean? The performance was just fine! Now, I am unable to efficiently search for information and the performance therefore is awful. How long will this go on?

OS X 10.8.3-Safari 6.0.4 Can't see or print Chase bank statements

Everything has worked just fine prior to installing the latest version of Adobe Reader. I could log on to my Chase credi tcard account, view and print from Safari anything I wanted. Subsequent to the Reader installation I can't see or print the statements. Printing other stuff hasn't been effected as far as I can tell.

Disable the Adobe Reader PDF plug-in.
See here: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
If you want to use Adobe's plug-in, make sure you open Adobe Reader and accept the license agreements, if you haven't already.

Can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

I get two-sided option for normal printing, but
I can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600. HP says it's an Adobe problem. I'm stuck.
Thanks in advance.
VO

It depends where the pdf is located. If in the Finder or in an attachment to
an email in Entourage, the message is ³You can¹t open the application
³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
If an attachment in an email that has come via Safari, the message is
³Safari can¹t open the file because no available applications can open it².
In each case the menu bar is Finder or Entourage or Safari as the case may
be.

HT4061 I was working on Setting and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large

I was working on Setting of my iphone4S, and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large screen. Please help me.

Did you try to tap using three fingers?
Turn Zoom on or off. Go to Settings > General > Accessibility > Zoom. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 123.
Zoom in or out. Double-tap the screen with three fingers.
copied from page 134 of the user guide iOS7

I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me :) Im running ios 6.0.1

I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

HT2534 i can't see the none option in payment method

i can't see the none option in payment method

Hello there, harjeetfromsantnagar.
The following Knowledge Base article offers some great information about your issue in particular:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I can't see the iPad option in the preview for the overlays or the folio builder.

I can't see the iPad option in the preview for the folio overlays or the folio buider.
I have the content viewer on my iPad and I am logged into it. This was working before. Getting a new version of the app does work.
Please help.

Hi Bob,
I think there's still something amiss here.
I have the v25 Folio Producer Tools for CS5.5 and the v25 Folio Builder panel. (I'm on 10.6.8 for reference.)
I also have the latest v25 CV from the App Store, and with my iPad Mini plugged in, and the Content Viewer open, the option to side-load still isn't showing.
I thought it might be because I also had a v24 viewer (custom built) installed, but that's not the case. I uninstalled both of them and just downloaded the v25 viewer from the App Store. The result was the same.

How can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

how can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

Follow the instructions in this article. You can turn off the auto-renewal on either your i-device or via iTunes on your computer:
Manage your auto-renewing subscriptions - Apple Support
Cheers,
GB

Can't see MFP printer attached to AE (in Bridge mode)

Can't see MFP printer attached via ethernet cable to 2nd AE (in Bridge mode extending wireless network) on local wifi network.
Printer is set to static IP adress (192.168.0.50).
Upstream Router is: 192.168.0.1 (this is connected to first AE).
When the printer was previously attached (by ethernet cable) to 1st AE, everything was working fine and I could login to printer Admin page via Safari by typing IP Address. I have since moved the printer to the back of the house and leaving all previous settings, the printer is not visiable on the wifi network.
Normal process to setup is:
System Prefs > Print & Fax > Add > IP > 192.168.0.50 (currently just hangs not seeing the printer).
Normally the printer name appears and the correct driver is shown at the bottom as Use: Ricoh 2020D Driver

Have you verified that the Ethernet port is functioning correctly by temporarily connecting a laptop, turning off the wireless, and connecting using an Ethernet cable to see if the laptop can get a good Internet connection that way?
The all-in-one device should also be reset back to factory default settings, then reconfigured again with a new static IP address. In other words, start all over again on the printer including a complete power cycle of the main and extending AirPort devices..

HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

jimka_2001 wrote:
What should I try next?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can't load usb printer driver

can't load usb printer driver

Hi...
If you are trying to load from an optical disc, try downloading the driver from the printer manufactures website instead. Make sure and check for the appropriate model number.

Can't see USB printer option in Cisco Connect

Similar Messages

Maybe you are looking for