Can't see video on NTSC Monitor During Playback

Since loading FCPS2, I can't get video output to my NTSC Monitor

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Similar Messages

Can't see video in NTSC monitor via DRS-11

Hi,
With the old Soundtrack Pro, i never had problem watching my video on my monitor.
Now, with the new Soundtrack Pro, despite i select NTSC Fire Wire, i can'r see anything in the monitor.
What am i doing wrong ?
thanks

please help me with this one...
Never had this problem with previous STP versions...
thanks

I can't see video on my monitor while I edit

Hello folks,
The other day, I was trying to add some
motion effects using Motion with transfered
clip from Final Cut Pro but all of sudden
video play on my monitor won't show anything
and even after I went back to final cut pro,
it won't show anything while I edited.
I thought it was just that particular clips or project
but it affects the whole FCP program and I can't see
anything both on the monitor nor canvas!
I now stopped working on my project because of it.
Does anyone know why this is happening and
please provide me some answers to solve this problem!
Thank you so much in advance folks!

Another issue might be that you have two or more output devices, like a blackmagic card for example make sure under view... (sorry I don't have FCP here, I don't remember the name of the submenu but I think it's 2 subs under external...) that you have the right device selected.

Can't see video in Source Monitor, or play it in Program Monitor

Hi there
I have been using Adobe Premiere Pro CS5 fine for months now, doing the same tasks on a daily basis. However yesterday morning the computer crashed whilst editing some footage and now it doesn't function properly.
I have re-installed the software and this hasn't fixed issues, and also performed a system restore which fixed some but not all of them.
The main problem is I can now import video into the project and drop it onto the timeline (which I couldn't before the system restore) but now I can't view the original footage in the Source Monitor, making editing tricky, and it doesn't play continuosly in the Source Monitor, only giving a still image wherever I leave the playhead.
I can hear the audio and it plays without any breaks, it's just the video.
Can anyone help?

Can anyone help? I use it for work and basically I can't do any more work until it's fixed.
Things I've tried:
Uninstall and reinstall
System restore
Checking opacity on clip
Checking which workspaces are open
importing old footage and other formats
opening old projects
updating codecs
emptying media cache

TS4062 I can't see videos I have taken on my ipad either in iCloud or when I sync my ipad to my macbookpro (both are up to date) I can only see photos? The videos are only few seconds long?

I can't see videos i have taken on my ipad in the iCloud all synced as i can see the still photos i have taken but not the videos. The videos are only a few seconds long. I have also tried syncing via USB cable from iPad to my Macbookpro and it wont sync either the photos or the videos in iTunes I have re checked the sync set up in itunes bt still nothing?
Any ideas would be appreciated
Thx
Laredo20

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

Can't see video one the web, YouTube works fine.

HI,
Using Safari I can't see video, In CNN I get the message that Apple restrict the use of Flash Player, but in other sites, which do not use Flash player I can't see the video as well, for example- http://harim.tv/default.asp?categoryid=0&videoid=317&srchq=&page=1 . The same problem in different pages having video attached, in the window of the video there is a cube shape.
Is there an add-on to Safari that has to be installed to make it working?
I would like to add, YouTube is working fine.
Thanks in advance
Eli

Hi
What Video Codec are Your material formatted as ?
And the problematic Video sequence - Same Video Codec ?
Open each original movie sequense in QuickTime player
then press cmd+I (or open Inspector) and read
- Video formatted as : nnnnnnnnnnnnn
- Frames per second : YY.yy
What does they say for the material that works - AND for the movie that are troublesome ?
Yours Bengt W

Can't see video from youtube

I can't see video from youtube when the video is embedded in a page.
I am using Safari (italian version) 6.0.2 (8536.26.17).
When I click on the arrow, the system show me the following error message: "Unbale to load the video".
With Firefox that's all OK.
Please, help me to solve the problem.
Message was edited by: vinsoft

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Can't see video quicktim

Have safari 3.04 quicktime pro 7.3 can't see video on trailer apple???
Thank's to help me

I was having the same problem, and I tried this and it worked. (Thanks!) Now the next logical question is, what am I going to be missing out on by not having this plug-in installed anymore?
--Dave

Can't see videos after I installed Adobe Flash Player 13.

Can't see videos after I installed Adobe Flash Player 13.
When I choose a video to play there is always: "Plug-in failure.
I use Mavericks on OS X 10.9
I unistalled Ad. Flash Player and reinstalled it but nothing got better
L.

See:ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

HT203477 PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?

PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)

What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.

I can´t see videos on youtube web . All the plug ins are upgrade

Since a week i can´t see videos on you tube. They don´t charge and Adobe plug ins are upgrade .On IE doesn´t happens this

You can attach to your computer with iTunes and backup the iPhone, provided you do not need to use a passcode...then you will be stuck if the screen is not visible and unresponsive.

HT1677 I can't see videos because I can't install adobe flash player. I read to enable plug ins, but I can't see either in my iPad.

I can't see videos because I can't install adobe flash player. I read to enable plug ins, but I can't see either in my iPad.

You can try using the 'official' Facebook app or Friendly For Facebook - not sure whether they work with videos.

I can not see videos on safari YouTube but I can hear the sounds what should I do?

I can not see videos on safari YouTube but I can hear the sounds of the video I use a iPad 2 plz help

There is another thread with same issue. You can see that here-
http://support.mozilla.com/en-US/questions/823830?s=flash+videos+not+working&as=s

Ios6 update has done something to you tube icon and now I can't see videos. Flash player required message and a black bar appears when scrolling. Any ideas? I've booked an appointment at the Genius Bar next Saturday but don't want to waste their time

iOS 6 update has done something to the YouTube icon and now I can't see videos when following the new link in the bookmark bar. Flash player required message appears and there is a black bar when scrolling.

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

Can't see video on NTSC Monitor During Playback

Similar Messages

Maybe you are looking for