Can't see video TS files on DVD.

I made a DVD with Adobe Encore. But on my Mac, I can't see the video TS files nor the data files I have burned on that DVD.
The DVD was authored on another iMac.

Thanks for your help,
I duplicated the disc by right clicking, then selecting duplicate. I received a message stating "you may need to enter an administrator password to change the name...". Entered my password, and the disc was copied to a new folder appearing on the desktop.
I've opened terminal and dragged the folder there, the name appeared in the terminal, I pressed enter, it ran "-bash" and just says that the folder is a directory. I don't know commands for terminal so I'm not sure what else to do here. I tried typing "Is Volumes/foldername" as you suggested, but it says command not found. (I didn't think you were saying to use "Is" as the command, but wasn't sure so I tried it anyway.)
In the get info window it has "Privilege = No Access" for Me, unknown, and everyone. I tried to change to Read & Write, but it does not change. The drop down under the gear thingy, between the - and padlock, is all grayed out and unelectable. This is what made me think something is wrong to begin with. How can I have no access to a folder I copied?
Could this be some sort of Sony format issue when it made the DVD? Setting everything to "No Access" on the disc itself? Or could it be that my mac is not compatible with files that are created elsewhere?

Similar Messages

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • How can I see that a file has been sent for workflow?

    How can I see that a file has been sent for workflow?
    During the workflow phase, the file is locked for workflow. But when the file has been approved (or denied) it will have the same status as it did before the workflow process (unless you trigger the workflow by changing its location).
    You can see the workflow history in the "My Request" view, but this way of determining whether a file has been approved seems complicated.
    Best regards
    Magnus

    Hi,
    Thanks for the transaction code, but my question is not answered yet.
    For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
    I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
    STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
    Thanks again,
    Julien

  • How can I see the stored files in cache?

    How can I see the stored files in cache? I need them!
    Thanks for helping me.

    The History menu lets you revisit the page where you can drag any page element from it.
    How would you sort through thousands (tens of thousands) of files found in a cache?

  • How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

    How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
    It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

    Jayhawk
    I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
    Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
    ATR

  • Project Manager can´t see my .lso files

    Hello logicusers, I am new at the forum and this is my first trouble: Project Manager can´t see my .lso files. I would like to start using PM but it seems to be difficult without seeing .lso files in the navigator window.
    I´ve read the books, I´ve checked here for this tip and got a lot of useful information, but no solution found. I hope somebody could help me please:
    - Macbook white with LP 7.2.3
    - Reinstalled and cleaned all
    - Installed OSX upgrade 0.4.9 manually
    - Installed pro application support 3.1
    - PM Data and logic preferences deleted
    - permissions applied to "all enclosed folders"
    - Performed a complete scan in PM
    If I create a new song from logic, PM can´t see this .lso file.
    If I scan a external hard drive (lacie f.a.porsche) through PM, it only recognizes one .lso file from a lot of old songs, and I don´t imagine why.
    Yesterday I tried this: opened PM, copied a Template song from the Templates folder to the Desktop; renamed it as "Sidload" (my particular "Autoload" term); until here, everything correct, PM seems to be able to manage "Sidload". But when I open Sidload and save the first change, and .bak folder comes, I can´t make more "visible copies for PM" of this file. Finder can see the new copies, but PM not (files that has created "itself"); so I can´t manage a song that has been copied, renamed and saved for first time -through PM, from a Template; invisible, dissapears. No saving PM data, no checking folder, no advanced search helps.
    I wish to have a way to talk to logic support via mail, but I don´t know how. So I came here to beg you friends for your help. Thank you very much for being here.

    yep, I have scanned at every level, from everything to just a single folder that contains song files. After scanning a folder that conatins songs on my SATA B drive (the one that PM can't find songs), still the songs will not appear.
    I have copied over my songs to the drive that PM seems to see songs on and guess what? It doesn't see those songs copied over.
    This is driving me so nuts I have forgotten that I engaged in this thread...
    http://discussions.apple.com/thread.jspa?threadID=1046126&tstart=0
    Does anyone know what the option in the PM's file menu "import file maps" and delete all exported file maps" does? Or what its for?
    It feels to me that some sort of database or referrence list etc etc has gone very wrong, but I have already tried deleting (manually) the PM data file in somewhere in the library folder etc etc.
    Using file buddy I see that PM stores the a PM database as an invisable file on each drive you have connected. Presumably info for what is on that drive. Perhaps these invisable files need to be manually deleted???
    Message was edited by Thomas O'Carroll because this forum doesn't work properly

  • TS4062 I can't see videos I have taken on my ipad either in iCloud or when I sync my ipad to my macbookpro (both are up to date) I can only see photos? The videos are only few seconds long?

    I can't see videos i have taken on my ipad in the iCloud all synced as  i can see the still photos i have taken but not the videos. The videos are only a few seconds long. I have also tried syncing via USB cable from iPad to my Macbookpro and it wont sync either the photos or the videos in iTunes  I have re checked the sync set up in itunes bt still nothing?
    Any ideas would be appreciated
    Thx
    Laredo20

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can't see video one the web,  YouTube works fine.

    HI,
    Using Safari I can't see video, In CNN I get the message that Apple restrict the use of Flash Player, but in other sites, which do not use Flash player I can't see the video as well, for example- http://harim.tv/default.asp?categoryid=0&videoid=317&srchq=&page=1 . The same problem in different pages having video attached, in the window of the video there is a cube shape.
    Is there an add-on to Safari that has to be installed to make it working?
    I would like to add, YouTube is working fine.
    Thanks in advance
    Eli

    Hi
    What Video Codec are Your material formatted as ?
    And the problematic Video sequence - Same Video Codec ?
    Open each original movie sequense in QuickTime player
    then press cmd+I (or open Inspector) and read
    - Video formatted as : nnnnnnnnnnnnn
    - Frames per second : YY.yy
    What does they say for the material that works - AND for the movie that are troublesome ?
    Yours Bengt W

  • Can't see video from youtube

    I can't see video from youtube when the video is embedded in a page.
    I am using Safari (italian version)  6.0.2 (8536.26.17).
    When I click on the arrow, the system show me the following error message: "Unbale to load the video".
    With Firefox that's all OK.
    Please, help me to solve the problem.
    Message was edited by: vinsoft

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • Can't see video quicktim

    Have safari 3.04 quicktime pro 7.3 can't see video on trailer apple???
    Thank's to help me

    I was having the same problem, and I tried this and it worked. (Thanks!) Now the next logical question is, what am I going to be missing out on by not having this plug-in installed anymore?
    --Dave

  • Can't see videos after I installed Adobe Flash Player 13.

    Can't see videos after I installed Adobe Flash Player 13.
    When I choose a video to play there is always: "Plug-in failure.
    I use Mavericks on OS X 10.9
    I unistalled Ad. Flash Player and reinstalled it but nothing got better
    L.

    See:ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

  • How can I see and excel file in my iphone 4s  THANKS

    how can I see and excel file in my iphone 4s  THANKS

    either export it as a pdf if you dont need to work in it or if you do use an app called numbers from apple it supports excel as far as i know

  • HT203477 PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?

    PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)

    What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.

  • Can''t see inbox.mbox file in user library

    For some reason, I can't see a .mbox file for my inbox when I look in my user library Mail folder. I can see a junk.mbox; I can see a deleted messages.mbox, but no inbox.mbox (or sent.mbox, for that matter). Can someone tell me where those messages live in the library? They must be somewhere, but I can't seem to find them. I am about to migrate to a new Mac Pro, and want to make sure everything gets to the new machine. I am currently using my laptop as my main machine, because my aging dual-867 mhz. MDD machine is nursing a dying hard drive, and nothing has been able to repair it, so I stopped using it. Of course, I still have a lot of mail on the old machine, and I wanted to archive the inbox contents to a .mbox file that I could import to the new computer. Are these mailboxes different from other mail folders? Thanks for any help.

    Hi and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Maybe you are looking for