Can't see video.
I just started a new project in FCP and when I rendered the video all I saw was green, or grey. Why? I've never had that problem before.
Try trashing the fcp prefs is the first step.
Although this may be qt related - we'll see.
Close fcp then download http://www.apple.com/downloads/macosx/video/fcprescue.html
Install and run it - note you will have to reset things to your preferred settings again. But if it works and all is good then you can run fcp rescue and save a copy which you can restore at any stage.
Try that first.
edit: just realised that linky is no good anymore - hang on I'm pretty sure our own Patrick Sheffeild has a copy stored - wait a tick ...
ahh - here you go http://www.pistolerapost2.com/fcprescue you want v5
Similar Messages
-
I can't see videos i have taken on my ipad in the iCloud all synced as i can see the still photos i have taken but not the videos. The videos are only a few seconds long. I have also tried syncing via USB cable from iPad to my Macbookpro and it wont sync either the photos or the videos in iTunes I have re checked the sync set up in itunes bt still nothing?
Any ideas would be appreciated
Thx
Laredo20deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone. -
Can't see video one the web, YouTube works fine.
HI,
Using Safari I can't see video, In CNN I get the message that Apple restrict the use of Flash Player, but in other sites, which do not use Flash player I can't see the video as well, for example- http://harim.tv/default.asp?categoryid=0&videoid=317&srchq=&page=1 . The same problem in different pages having video attached, in the window of the video there is a cube shape.
Is there an add-on to Safari that has to be installed to make it working?
I would like to add, YouTube is working fine.
Thanks in advance
EliHi
What Video Codec are Your material formatted as ?
And the problematic Video sequence - Same Video Codec ?
Open each original movie sequense in QuickTime player
then press cmd+I (or open Inspector) and read
- Video formatted as : nnnnnnnnnnnnn
- Frames per second : YY.yy
What does they say for the material that works - AND for the movie that are troublesome ?
Yours Bengt W -
I can't see video from youtube when the video is embedded in a page.
I am using Safari (italian version) 6.0.2 (8536.26.17).
When I click on the arrow, the system show me the following error message: "Unbale to load the video".
With Firefox that's all OK.
Please, help me to solve the problem.
Message was edited by: vinsoftFrom the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
Have safari 3.04 quicktime pro 7.3 can't see video on trailer apple???
Thank's to help meI was having the same problem, and I tried this and it worked. (Thanks!) Now the next logical question is, what am I going to be missing out on by not having this plug-in installed anymore?
--Dave -
Can't see videos after I installed Adobe Flash Player 13.
Can't see videos after I installed Adobe Flash Player 13.
When I choose a video to play there is always: "Plug-in failure.
I use Mavericks on OS X 10.9
I unistalled Ad. Flash Player and reinstalled it but nothing got better
L.See:ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
-
PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)
What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.
-
I can´t see videos on youtube web . All the plug ins are upgrade
Since a week i can´t see videos on you tube. They don´t charge and Adobe plug ins are upgrade .On IE doesn´t happens this
You can attach to your computer with iTunes and backup the iPhone, provided you do not need to use a passcode...then you will be stuck if the screen is not visible and unresponsive.
-
I can't see videos because I can't install adobe flash player. I read to enable plug ins, but I can't see either in my iPad.
You can try using the 'official' Facebook app or Friendly For Facebook - not sure whether they work with videos.
-
I can not see videos on safari YouTube but I can hear the sounds what should I do?
I can not see videos on safari YouTube but I can hear the sounds of the video I use a iPad 2 plz help
There is another thread with same issue. You can see that here-
http://support.mozilla.com/en-US/questions/823830?s=flash+videos+not+working&as=s -
iOS 6 update has done something to the YouTube icon and now I can't see videos when following the new link in the bookmark bar. Flash player required message appears and there is a black bar when scrolling.
YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
Cheers, Tom -
Can't see video in NTSC monitor via DRS-11
Hi,
With the old Soundtrack Pro, i never had problem watching my video on my monitor.
Now, with the new Soundtrack Pro, despite i select NTSC Fire Wire, i can'r see anything in the monitor.
What am i doing wrong ?
thanksplease help me with this one...
Never had this problem with previous STP versions...
thanks -
I can't see video on my monitor while I edit
Hello folks,
The other day, I was trying to add some
motion effects using Motion with transfered
clip from Final Cut Pro but all of sudden
video play on my monitor won't show anything
and even after I went back to final cut pro,
it won't show anything while I edited.
I thought it was just that particular clips or project
but it affects the whole FCP program and I can't see
anything both on the monitor nor canvas!
I now stopped working on my project because of it.
Does anyone know why this is happening and
please provide me some answers to solve this problem!
Thank you so much in advance folks!Another issue might be that you have two or more output devices, like a blackmagic card for example make sure under view... (sorry I don't have FCP here, I don't remember the name of the submenu but I think it's 2 subs under external...) that you have the right device selected.
-
Can't see Video titles in ipod
Hello,
I put some home videos on new ipod. I named them, but when i use the ipod the videos play, but i can't see the titles. How do I need to name the files?
Thanks!Unfortunately, only TV Shows bought directly from the iTunes Music Store will show up as TV Shows on your iPod (by default). You'll have to leave your videos labeled as Movies, if you want them to show up on your iPod. Sorry.
-
Can't see video for FCP X project!
I was working on a video in Final Cut Pro X, but I wonder if I did something wrong; after last night all of a sudden I can't see the project in the timeline in the application's preview window! I'm able to see the clips in the event window, but not what's in my project window/timeline. Any ideas on how to help me?
I can see the clips with thumbnails on them, but in the viewer window I cannot see anything, but I can hear the audio. I may post screenshots.
Unusually, it's only with this one project, and when I open another project, I can see that one's footage. When I skim this troublesome project in the "Projects" window I can see it, but not when the project is open? -
Can't see video anymore...
Hi,
I don't know what happenned but I can't see my video anymore... They all became a white square with a X inside... It does the same thing if I import a new video. I tried uninstalling everything but it didn't work, I have Adobe presenter 9, I tried it on another computer with Adobe Presenter 8 and it worked, can someone help me, please ?
Thanks,
CarolineHello,
I can send you the file but actually it does that with any file. If I make a new one, i have the same problem, but I save it and try it on another computer that has adobe presenter 8 and it worked. It used to work but now it doesn't, it's really weird. I never had problem but I installed Presenter 9 today and it worked fine this morning but stoped to work fine in afternoon. I really don't understand.
If I import the file, I can see the preview but once in ppt, it give me a white square. It's weird because I only opened the program again and the problem suddenly appears...
Maybe you are looking for
-
How do I download all my songs from iCloud without having to click on each one?
I have two computers and I would like to have my iTunes library on both. How do I download all my songs from iCloud without having to click on each one?
-
ITunes no longer able to sync Calendar items and Bookmarks on iPhone.
Things have been going great with syncing my iPhone through iTunes on my 24" intel iMac, until yesterday (3/9/08). I haven't changed anything in the last couple of days. I always download and install the latest iPhone, iMac, iTunes updates the same d
-
WiFi on iPad 2 randomly goes out, but WiFi on other Apple devices is fine???
I have an iPhone 5 and an iPad 2. Randomly, the wifi on my iPad will just disappear. I know it isn't a problem with the wifi shutting on - because it is still working completely fine on my iPhone. If I leave it for a few hours it usually turns back o
-
Extract red image with Vision Builder Automated Inspection
Hello I have 2 camera connected to a CVS and I want to process the images to have only the red part of the images. for that I tried to use VBAI but I din't sucess, I think nit should be in the vision assistant step, but I already tryed with "extract
-
TS1717 How do I get itunes to open on Win 7 after update?
Any further suggestions on getting itunes to work on a windows 7 64-bit platform since the update? I have tried removing the files as per the instructions and tried opening in safe mode and just for good measure I even tried reinstalling the program