Can't seem to any speed change when overclocking

I tweaked around and set my fsb higher in bios but it doesn't show any difference when i use wcpuid to check the speed. I looked around in the forum, i didn't really find anything similar, or maybe I'm not looking hard enough. Any thoughts?
Sorry if this is a common problem   and has already been solved.

WCPUID 3.1a cannot read the chipset data use CPUZ instead it could be help.
M/B 865 PE Neo-2 PFS Platinum Edition
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 1 and 3)
VGA:ELSA Gladiac 925 Ti4600
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

Similar Messages

  • Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

    Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

    App purchases are permanently tied to the ID with which they were purchased. They cannot be transferred to a new ID.
    You will have to enter the password for that ID or delete the apps and re-purchase them with the new one.
    ~Lyssa

  • Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

    Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

    1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
    If you've done something different then provide some more details about what is where and I should be able to help.
    2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
    3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
    4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
    tt2

  • My iPad iTunes store isn't working.. When I add a wifi I can't get into any websites and when I turn the wifi off I can but without wifi I can't download on iTunes :/

    My iPad iTunes store isn't working.. When I add a wifi I can't get into any websites and when I turn the wifi off I can but without wifi I can't download on iTunes :/

    Ashotiffo wrote:
    My iPad iTunes store isn't working.. When I add a wifi I can't get into any websites and when I turn the wifi off I can but without wifi I can't download on iTunes :/
    When you add a WiFi you can't get into any websites??? But if you turn WiFi off you can access websites?
    You can access websites without WiFi? Do you have a 3G/4G iPad?

  • I'm running os 10.5.8 and want to upgrade to new mountain lion but need to first upgrade to 10.6.8. I downloaded that but got message saying i needed 10.6 first, which I can't seem to find anywhere. When i try Software Update from the apple menu, it says

    Help! I want to upgrade to the new Mountain Lion OS but first need to upgrade rto 10.6.8. I'm currenty running 10.5.8. When i try the Software update from my desktop apple menu, it says i already have the most redent software. I tried downloading 10.6.8 but when i tried to run it said i first need 10.6, which i can't seem to find anywhere on the Apple site or internet. Any suggestions? Can i somehow not upgrade form 10.5.8 to 10.6 or higher?
    Thanks.

    Get this from Amazon before the prices really get out of control!
    OS X 10.6.3
    http://www.amazon.com/Mac-version-10-6-3-Snow-Leopard/dp/B001AMHWP8/ref=sr_1_1?s =software&ie=UTF8&qid=1343250995&sr=1-1&keywords=OS+X+Snow+Leopard
    OR
    OS X 10.6.0
    http://www.amazon.com/Mac-OS-Snow-Leopard-10-6/dp/B002KG02QO/ref=sr_1_2?s=softwa re&ie=UTF8&qid=1343250995&sr=1-2&keywords=OS+X+Snow+Leopard

  • I had started the process of removing my husband as the primary on my ipad2 device before the Holiday and never got back to it.  I keep getting a message on the ipad  for New icloud Terms and Conditions but I can't seem to log on.  when i go to it's locke

    I had contacted apple support before the Holiday and we had started the process of removing/replacing my husband as the primary on my ipad2.  However, I keep getting messages now 'New iCloud Terms and Conditions'  in a window that constantly pops up.  When I go to settings to log into icloud, it is locked with a grey screen.  What can I do?  Also, I had gone throught he process of syncing all 3 of my devices Ipad2, mini and my iphone5 to have the same passwords, etc. for ease of use.  Now that seems to be all wrong as well.  HELP!  I need these devices for my work and I'm short on time to go to the store, but will if I have to.
    Thank you!
    Julie

    If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.

  • I can't seem to get individual elements when comparing 2 arrays using Compare-Object

    My backup software keeps track of servers with issues using a 30 day rolling log, which it emails to me once a week in CSV format. What I want to do is create a master list of servers, then compare that master list against the new weekly lists to identify
    servers that are not in the master list, and vice versa. That way I know what servers are new problem and which ones are pre-existing and which ones dropped off the master list. At the bottom is the entire code for the project. I know it's a bit much
    but I want to provide all the information, hopefully making it easier for you to help me :)
    Right now the part I am working on is in the Compare-NewAgainstMaster function, beginning on line 93. After putting one more (fake) server in the master file, the output I get looks like this
    Total entries (arrMasterServers): 245
    Total entries (arrNewServers): 244
    Comparing new against master
    There are 1 differences.
    InputObject SideIndicator
    @{Agent= Virtual Server in vCenterServer; Backupse... <=
    What I am trying to get is just the name of the server, which should be $arrDifferent[0] or possibly $arrDifferent.Client. Once I have the name(s) of the servers that are different, then I can do stuff with that. So either I am not accessing the array
    right, building the array right, or using Compare-Object correctly.
    Thank you!
    Sample opening lines from the report
    " CommCells > myComCellServer (Reports) >"
    " myComCellServer -"
    " 30 day SLA"
    CommCell Details
    " Client"," Agent"," Instance"," Backupset"," Subclient"," Reason"," Last Job Id"," Last Job End"," Last Job Status"
    " myServerA"," vCenterServer"," VMware"," defaultBackupSet"," default"," No Job within SLA Period"," 496223"," Nov 17, 2014"," Killed"
    " myServerB"," Oracle Database"," myDataBase"," default"," default"," No Job within SLA Period"," 0"," N/A"," N/A"
    Entire script
    # things to add
    # what date was server entered in list
    # how many days has server been on list
    # add temp.status = pre-existing, new, removed from list
    # copy sla_master before making changes. Copy to archive folder, automate rolling 90 days?
    ## 20150114 Created script ##
    #declare global variables
    $global:arrNewServers = @()
    $global:arrMasterServers = @()
    $global:countNewServers = 1
    function Get-NewServers
    Param($path)
    Write-Host "Since we're skipping the 1st 6 lines, create test to check for opening lines of report from CommVault."
    write-host "If not original report, break out of script"
    Write-Host ""
    #skip 5 to include headers, 6 for no headers
    (Get-Content -path $path | Select-Object -Skip 6) | Set-Content $path
    $sourceNewServers = get-content -path $path
    $global:countNewServers = 1
    foreach ($line in $sourceNewServers)
    #declare array to hold object temporarily
    $temp = @{}
    $tempLine = $line.Split(",")
    #get and assign values
    $temp.Client = $tempLine[0].Substring(2, $tempLine[0].Length-3)
    $temp.Agent = $tempLine[1].Substring(2, $tempLine[1].Length-3)
    $temp.Backupset = $tempLine[3].Substring(2, $tempLine[3].Length-3)
    $temp.Reason = $tempLine[5].Substring(2, $tempLine[5].Length-3)
    #write temp object to array
    $global:arrNewServers += New-Object -TypeName psobject -Property $temp
    #increment counter
    $global:countNewServers ++
    Write-Host ""
    $exportYN = Read-Host "Do you want to export new servers to new master list?"
    $exportYN = $exportYN.ToUpper()
    if ($exportYN -eq "Y")
    $exportPath = Read-Host "Enter full path to export to"
    Write-Host "Exporting to $($exportPath)"
    foreach ($server in $arrNewServers)
    $newtext = $Server.Client + ", " + $Server.Agent + ", " + $Server.Backupset + ", " + $Server.Reason
    Add-Content -Path $exportPath -Value $newtext
    function Get-MasterServers
    Param($path)
    $sourceMaster = get-content -path $path
    $global:countMasterServers = 1
    foreach ($line in $sourceMaster)
    #declare array to hold object temporarily
    $temp = @{}
    $tempLine = $line.Split(",")
    #get and assign values
    $temp.Client = $tempLine[0]
    $temp.Agent = $tempLine[1]
    $temp.Backupset = $tempLine[2]
    $temp.Reason = $tempLine[3]
    #write temp object to array
    $global:arrMasterServers += New-Object -TypeName psobject -Property $temp
    #increment counter
    $global:countMasterServers ++
    function Compare-NewAgainstMaster
    Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
    Write-Host "Total entries (arrNewServers): $($countNewServers)"
    Write-Host "Comparing new against master"
    #Compare-Object $arrMasterServers $arrNewServers
    $arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
    Write-Host "There are $($arrDifferent.Count) differences."
    foreach ($item in $arrDifferent)
    $item
    ## BEGIN CODE ##
    cls
    $getMasterServersYN = Read-Host "Do you want to get master servers?"
    $getMasterServersYN = $getMasterServersYN.ToUpper()
    if ($getMasterServersYN -eq "Y")
    $filePathMaster = Read-Host "Enter full path and file name to master server list"
    $temp = Test-Path $filePathMaster
    if ($temp -eq $false)
    Read-Host "File not found ($($filePathMaster)), press any key to exit script"
    exit
    Get-MasterServers -path $filePathMaster
    $getNewServersYN = Read-Host "Do you want to get new servers?"
    $getNewServersYN = $getNewServersYN.ToUpper()
    if ($getNewServersYN -eq "Y")
    $filePathNewServers = Read-Host "Enter full path and file name to new server list"
    $temp = Test-Path $filePathNewServers
    if ($temp -eq $false)
    Read-Host "File not found ($($filePath)), press any key to exit script"
    exit
    Get-NewServers -path $filePathNewServers
    #$global:arrNewServers | format-table client, agent, backupset, reason -AutoSize
    #Write-Host ""
    #Write-Host "Total entries (arrNewServers): $($countNewServers)"
    #Write-Host ""
    #$global:arrMasterServers | format-table client, agent, backupset, reason -AutoSize
    #Write-Host ""
    #Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
    #Write-Host ""
    Compare-NewAgainstMaster

    do not do this:
    $arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
    Try this:
    $arrDifferent = Compare-Object $arrMasterServers $arrNewServers -PassThru
    ¯\_(ツ)_/¯
    This is what made the difference. I guess you don't have to declare arrDifferent as an array, it is automatically created as an array when Compare-Object runs and fills it with the results of the compare operation. I'll look at that "pass thru" option
    in a little more detail. Thank you very much!
    Yes - this is the way PowerShell works.  You do not need to write so much code once you understand what PS can and is doing.
    ¯\_(ツ)_/¯

  • Have lost my Administrator account  - can no longer make any system changes

    Since I had forgotten my Administrator Password on my son's Mac, I inserted a Leopard DVD, restarted the Mac while holing the "c" key and used the utilities menu to reset the password on my Administrator acount.
    After following the on screen steps to reset the computer, when I rebooted the Mac my administrator account was now completely missing.
    All that is left are two standard user accounts that work fine but do not allow me to install new hardware becasue they are not administrator accounts. What did I do wrong? and can I recover my Administrator account or promote one of the remaining standard user accounts to adminstrator level?
    Thanks in advance for any help

    Welcome to Apple Discussions!!
    What did I do wrong?
    Did you use a Leopard DVD on a Tiger system? That's what your post appears to be saying.
    and can I recover my Administrator account or promote one of the remaining standard user accounts to adminstrator level?
    You can use the appropriate one of these User Tips to promote one of the existing ones:
    I lost my admin user (Mac OS X 10.4 and earlier)
    I lost my admin user (Mac OS X 10.5)
    Be sure you use the right tip, and also to make the appropriate username substitutions.

  • Can I make my default printer change when I change location

    How do you make automatically change printers when you change network locations? If it is possible I sure don't see how. Seems like I could do this in OS9 but I didn't need it then.

    I haven't tried it, but I've seen it advertised:
    http://homepage.mac.com/locationmanager/
    (if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the gold or green star above in order to mark this reply as "helpful" or "solved")

  • How can I do so the color changes, when i leave the mouse over it?

    Hi.
    When i press down one of the menu buttons, changes the color to grey it grey. How do i change that, cause I would rater have, that only the script changes color to green.

    Hi,
    The following links might be helpful:
    Create rollover effects with the State Button widget | Adobe Muse CC tutorials
    https://helpx.adobe.com/muse/using/assigning-states-objects.html
    https://www.youtube.com/watch?v=F2IiQa-12H0
    Regards
    Sonam

  • Can't seem to preview the audio when previewing capture footage

    Hi,
    I am new to editing, mac & FCE to excuse any ignorance.
    I have to do some editing for work and currently have a DV cam set up through a firewire cable to the mac.
    I am trying to preview the footage before i start capturing, i can see that fce has control over my DVcam & that the footage is there, however there is no audio. I can get audio after choosing the clip to capture however not before.
    Surely there must be a way of previewing audio before you decide on what you would like to capture?
    If anyone has any ideas please let me know. Thanks!

    http://www.fcpbook.com/Audio3.html

  • I want to set up an email alias but I keep being told I need to access "preferences" in mail. I don't seem to have that open when I go into mail it takes me straight to my inbox.  Thanks for any help.

    Hi. I am new to using an iPad. I have set up an icloud email address for use by all the family.. I want to set up my own as my pop email does not seem to work well on this apple platform. I have tried to self help but I'm being asked to access the icloud mail preferences. I can't seem to do that. When I go into my mail app it takes me straight to my in box. I can't find a way of accessing preferences. Can someone help please?

    An Alias would be an email address that is delivered to a different account's inbox.
    For instance if you have  [email protected] and have [email protected] Then [email protected] would be an alias if mails from that address arrive at the icloud address.
    If you want to add a completely different account, with a spearate inbox, like an account in hotmail and one in say yahoo mail. Then as has been pointed out, you need to go into the  Settings Icon, Tap on Mail, Contacts, Calendars, and then on add account. The iPad has several services preconfigured, you can tap on one of those from the list to setup an email for that service. Such as Hotmail, Gmail etc...
    Or you can tap on other to add a personal pop3 or imap type email like from your office, or your school.

  • Orion shows 3750 port speed changes - is it normal?

    Hi all,
      We use Orion for monitoring.  We recently started monitoring a workstation switch and find many occurances of port speed changes indicated.  Our workstation ports are configured with auto speed and duplex.  Is it normal that we are detecting speed changes on the ports?  Do workstations running XP automatically adjust their speed for traffic management or power save?  Perhaps something like speeds changing when PC goes to sleep mode but has wake on LAN enabled?  Is it possible that the MIB is misreporting?
      I realize that there are many different NIC vendors/drivers that might act differently.  Just wondering (in others experience) if it is somewhat normal or if there is anything on network I should be looking into as to why speeds are changing?  We plan to not monitor workstation ports (only uplinks) on the switch.. but before we do, I thought I would see if what we are detecting needs to be addressed?
      Here is an example from Orion of a speed changing.  Seems always off hours:
    6/1/2012 6:17:52 AM
    event
    WoRKSTATION-3750-CLUSTER - GigabitEthernet1/0/14 · 2nd Floor Patch#11 Interface Speed changed from 10000000 to 1000000000 bps
    6/1/2012 2:47:52 AM
    event
    WoRKSTATION-3750-CLUSTER - GigabitEthernet1/0/14 · 2nd Floor Patch#11 Interface Speed changed from 1000000000 to 10000000 bps
      Thanks in advance for any experienced feedback.
    Colin

    Ours does it all the time for some reason.  We presume it's due to the port negotiating speed during PC boot from 100mb to 1g, but never really followed up.

  • Color space change when using photoshop elements plug in

    When I select photo and edit with photoshop elements, Aperture makes a copy of the file as expected, but I can see the image color/hue etc. has changed, why?  Is there some setting I am missing?  The color of the image shouldn't change, should it? Just doesn't make sense!

    Where do you see the color change of the copy?
    In the thumbnail or preview before it is send to the external edtor?
    When the image is opened in the external editor?
    Or after it is send back from the editor?
    I do not see any color changes when I use PS CS5; it may help to see a screenshot.

  • CC2014 Project Manager not keeping speed changes

    trying to use project manager to consolidate a 40 minute sequence, everything looks good along the way, but any speed changes in the sequence are not keep in the new project....anyone else experience this?  and is there a workaround?

    Is this specific to this project (or specific settings) or are you seeing this in general? e.g.: if you create a new Project, apply Speed/Duration to a single clip in a Sequence (e.g.: 200%), then Consolidate and Transcode, does the Transcoded Project still have the Speed/Duration value applied to the clip in the Sequence?
    I have not seen any reports on Speed/Duration missing and also ran a few sanity checks with Speed/Duration and Time Remapping in CC2014 (8.2), which all continued to have Speed values applied in the Transcoded Project Sequence. I also tried Collect Files and Copy to New Location, which also retained Speed values.

Maybe you are looking for

  • Playing cd's in iTunes. Glitch.

    Hello, when I insert a cd in my computer, and try to play it with iTunes, it always skips when I either just clicked to play it, selected the next track, or jumped a bit in a song. This is making it pretty much impossible to sit back, relax, and play

  • Message cannot be displayed because of the way it is formatted

    I have an email sent to my company exchange 2003 account with pdf attachments. When I open the email on my Ipad, I can view the the pdf files but when I move to another email message and then go back to the email message with the pdf files the follow

  • Jump To Record in Combo Box and Poplist

    Hello, I have created a demo Form to show how to create a Jump-to feature for Combo Boxes and Poplists. In the combo box the user enters a character and it automatically jumps to the first entry starting with that character. With the poplist, the use

  • Old is gold . Min order /min Qty value in GOA

    Hi in olden GOA , we do have item field called min qty and min order . but removed in new GOA. it makes me more concern Why SAp removed them. I want that functionality in SRM 550. since my material master has more rounding value causing problem.. mut

  • Can't pay for my online game

    Hello, there! I have a hard time to pay for my online game, can u help?