Can't seem to control power agenda
I've tried everything I can to avoid having to login. Even if I'm burung a disk the screen will turn off after about 5 minutes and I will have to login. I put all items at 400 min (while on AC) select apply but nothing seems to work.
I use the 520 at home so there are no security issuse.
I would like the machine to go into standby after 2 hours of inactivity. Nothing more complicated than that.
Any one have any advice? Thanks.
Hello rsay777,
Kindly try the following troubleshooting to resolve the issue.
1. Right click on the desktop and select personalize
2. Click Screensaver
3. Uncheck box which says on resume, display login screen and click OK
If the issue persist look for any auto lock software in Control Panel > Programs and features
Last you can try creating new user account and login with it.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?
What version do you have?
iPhoto menu -> About iphoto.
What goes to your iPad/iPhone is controlled in iTunes.
Regards
TD -
Audio problem; can't seem to control where the sound is coming from!
Good day!
I am currently trying to set up a VERY basic "two camera shoot" using my built in iSight, and a Sony DCR-TRV315 Digital-8 w/FireWire camcorder.
(I know, I know; I'm breaking all sorts of rules using such unmatched cameras. I'm a terrible videographer.)
I'm NOT capturing from tape, however. I'm just using the lens of it to get a different shot. By just plugging it in, iMovie recognizes it, just as it would a FireWire webcam, and allows me to capture straight to the hard drive.
To record audio, I'm using a Griffin iMic (USB preamp) with a Sony lavaliere mic.
I have, of course, selected the iMic as the device for sound input in Sound Preferences.
When I set the input camera to the built in iSight, the iMic kicks in and the lavaliere works like a dream. However; when I switch to the Sony camera, the iMic seems to get overridden, and the Sony camera's built-in mic kicks in! And the Sony camera isn't even IN the "choose a device for sound input" box in Sound Preferences!
Is there any way to record JUST the video from the Sony DCR-TRV315, and keep the audio coming in from the iMic? I can't seem to find an audio preference that would control this, like you'd find in Garageband for example. This is a big problem. The look of the video changes enough between shots; I can't have the sound changing with it!
Thanks for any help!Thanks everyone.
Unfortunately, I think that M. Dubose is correct; for some reason, it doesn't want to seem to split up the FireWire input.
The real kicker is that, by using the Griffin iMic along with the built-in iSight, I'm ALREADY getting sound and video from two separate sources. It just doesn't want to let me split this FireWire signal like it will the iSight's video signal/built in microphone.
If it wasn't for this one thing, the input toggle could work quite effectively as a basic switcher. Hopefully, in future iMovie builds, the need for an independent iMovie Sound Prefs will be addressed, as that'd likely take care for this whole thing.
The other issue is that the camera I'm using isn't true DV; it's Sony's proprietary Digital 8 format, which unfortunately, ain't too hot for image quality. That's why I'm hesitant to record to the tape and import. However, the lens and the FireWire port are still very valid, so by recording directly to the hard drive, it should have been fine for my needs.
Also; the idea of THAT much precise editing in a single-channel software just makes my head spin. Switching inputs between shots would have been so much easier. Ah well. iMovie is a good program otherwise; I guess you just can't expect the world from free software, eh?
I'll probably test it with a buddy's FireWire camcorder to make absolutely sure that it isn't just some freaky incompatibility keeping me from selecting the audio in of my choice. But I can't say that I'm too optimistic.
Thanks again, everyone! -
Can't seem to control screen orientation on Android
I'm trying to use Flash Pro with Air 3.2. I'm used to making apps for iOS and the orientation handling seem much more elegant.
Can someone point me in the right direction for Android. There must be a magic combination of setttings to get this to work?
Trying to use this with Aspect set to Landscape and Orientation set to Auto, but it really freaks out on my Galaxy tab. Keeps switching all the time and rarely matches the orientation I am holind the tablet in.
stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, orientationChangeListener);
var startOrientation:String = stage.orientation;
if (startOrientation == "default" || startOrientation == "upsideDown") {
stage.setOrientation(StageOrientation.ROTATED_RIGHT);
} else {
stage.setOrientation(startOrientation);
function orientationChangeListener(e:StageOrientationEvent) {
if (e.afterOrientation == "default" || e.afterOrientation == "upsideDown") {
e.preventDefault();
EDIT: I'm using a Galaxy Tab to test if that matters. It seems like my device is pretty slow to react to orientation on the desktop, but it goes haywire in my app.
Thanks for any help you can provide.I guess if this is a feature in 3.3 it must be know to not work in 3.2?
http://labs.adobe.com/technologies/flashplatformruntimes/air3-3/
"Aspect Ratio Enhancements — With AIR 3.3 the issue with the runtime ignoring the specified aspect ratio has been resolved. In this release we address this use-case by allowing only screen orientation corresponding to app specified aspectRatio and orientation corresponding to 180 degree device rotation from the specified aspectRatio."
Is there a workaround? Is it possible to prevent portrait view on a landscape app under 3.2? I can't get it to not distort my app to a portrait view. -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
My Ipod seemes to responding slowly if at all and all the sudden in Voice control. I can't seems even to tap in my passcode to get in. Any ideas as to why?
If you mean Voice Over... See Here...
Press the Home Button 3 Times
Or
Settings > General > Accessibility > Voice Over > Off -
I recently got an eiPhone and I believe it's a 4s and can't seem to Find Siri it has voice control bit I don't think it's the same. Any help ? It's not in settings or restrictions .
Enter the serial number here to get the definitive answer on model: https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?
Make sure there's enough free space on the startup disk to install software updates...
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides -
When I try to open a spreadsheet on my Mac that I worked on with my iPhone, I get "You need a newer version of Numbers to open this spreadsheet." When I go to the App store, it says I already have it. I have v. 2.3 and can't seem to download newer version.
If you are running Mavericks, and the Mac App store says you are up to date, then you have Numbers 3.2 as well as Numbers 2.3. You are getting the "Need a newer version message because your Mac is trying to open the document using Numbers 2.3.
Launch Numbers 3, then open the document from within that app, or right click/control-click the document and choose Open with Numbers 3.x.
Regards,
Barry -
I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store.
How do I "log out" or "sign out" of iCloud on my iPhone? There is an option to delete the account, but I just want to log off. I want to keep the account name for future use.@fernandamagalhaes
It looks like the article below has the information you are looking for.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Note: If you delete your iCloud account, iCloud will no longer back up your iOS data. You can still back up your device in iTunes (for more information, open iTunes and choose iTunes > Help).
On your Mac, open iCloud preferences, then click Sign Out.
If your Mac has OS X v10.7.5 and you turn off iCloud, your calendar information and reminders aren’t stored locally in iCal. If you want to retain your calendar and reminder information, you need to back it up before turning off iCloud. For more information, see the Apple Support article iCloud: Calendar & reminder data removed from Calendar and Reminders or iCal when disabling iCloud Calendar.
On your Windows computer, open the iCloud Control Panel, then click Sign Out.
Note: If you turned on automatic download of music, app, or book purchases (in iTunes preferences or in Settings on your iOS device), your iTunes purchases are still downloaded to your devices.
Set up iCloud on your devices -
I've downloaded IOS 6 but I have ended up with the wrong apple ID on the apps store and iTunes, I can't seem to change it. Can someone tell me how?
I solved my own problem after reading a number of discussion threads, reset the iPad with the power off button (if that's what you call it), when I switched back on it had an error message on the updates but let me then change the account back to mine.
Mind you still not impressed with a few things on ios6 - mainly the shocking maps that miss most country towns or have the tags in the wrong places. Can we have Google back please Apple? -
I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update. Anyone have a resolution for this??? Apple???
Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby. -
Help! I want to upgrade to the new Mountain Lion OS but first need to upgrade rto 10.6.8. I'm currenty running 10.5.8. When i try the Software update from my desktop apple menu, it says i already have the most redent software. I tried downloading 10.6.8 but when i tried to run it said i first need 10.6, which i can't seem to find anywhere on the Apple site or internet. Any suggestions? Can i somehow not upgrade form 10.5.8 to 10.6 or higher?
Thanks.Get this from Amazon before the prices really get out of control!
OS X 10.6.3
http://www.amazon.com/Mac-version-10-6-3-Snow-Leopard/dp/B001AMHWP8/ref=sr_1_1?s =software&ie=UTF8&qid=1343250995&sr=1-1&keywords=OS+X+Snow+Leopard
OR
OS X 10.6.0
http://www.amazon.com/Mac-OS-Snow-Leopard-10-6/dp/B002KG02QO/ref=sr_1_2?s=softwa re&ie=UTF8&qid=1343250995&sr=1-2&keywords=OS+X+Snow+Leopard
Maybe you are looking for
-
Problem upgrading 10g Express to Apex 3.1.2
I have Oracle Database 10g Express Edition Release 10.2.0.1.0 installed on windows XP. I want to develop an application using oracle express (apex), so I thought it would be a good idea to upgrade apex (from the default apex 2.0 that came with 10g xe
-
T.Code: F-03 -The difference is too large for clearing
Hi, When we try to clear G/L Account line item we are getting the error message is " The difference is too large for clearing" And this GL Account is set for Open item & Line item management and company code currency CAD. But they have not cliked for
-
Directory structure / separating sites
I'm trying to figure out how to separate sites like in .Mac HomePage. For example, I want to have a site for work, for family, for friends, etc. with their own respective URL. I can't see how to organize this in iWeb. It works by nesting the site ins
-
Regarding to Windows Media Foundation?
Hi All, I am confused about Window Media Foundation and following Link's sample code. http://blogs.msdn.com/b/mediasdkstuff/archive/2013/06/27/list-of-windows-8-1-preview-audio-video-and-camera-samples.aspx Are those Link's sample code based on Wind
-
When I try to update my iPod touch to iOS4.3 I'm told to go to Devices in iTunes, then Summary. I can't find Summary.