Can't seem to get apache to start up... [SOLVED]
I try to invoke Apache using 'httpd' as my command and I get the following:
xelados@sporkbox:/etc/httpd/conf$ httpd
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
I've tried running as root and nothing happens. I've modified /etc/httpd/conf/httpd.conf to set ServerName to 10.0.0.9, which is my internal IP. This server will be acting to provide an intranet wiki. I've never seen this error before, so I'm unsure as to how to handle it.
SOLVED: A friend I know helped me out. I added "127.0.0.1 localhost.localdomain sporkbox" to my /etc/hosts and added "Listen 127.0.0.1:80" to /etc/httpd/httpd.conf along with my internal IP and it worked! Now Apache works when I input "localhost", my internal IP, and my hostname.
Last edited by xelados (2007-06-08 07:51:11)
This is what the error log has in store for me:
[Wed Jun 06 22:47:57 2007] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
[Wed Jun 06 22:47:57 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/bin/suexec)
[Wed Jun 06 22:47:58 2007] [alert] (EAI 2)Name or service not known: mod_unique_id: unable to find IPv4 address of "sporkbox"
Configuration Failed
And here's my current netstat -natup:
xelados@sporkbox:~$ sudo netstat -natup
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:6600 0.0.0.0:* LISTEN 5521/mpd
tcp 0 0 10.0.0.9:58000 209.85.41.144:21 ESTABLISHED 6479/pacman
tcp 0 0 10.0.0.9:45081 209.85.41.144:41829 ESTABLISHED 6479/pacman
tcp 0 0 10.0.0.9:43868 72.14.253.95:80 ESTABLISHED 6456/firefox-bin
udp 0 0 10.0.0.9:32777 68.193.149.145:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32778 216.135.38.249:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32779 65.111.164.224:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32780 66.111.46.200:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32782 216.93.242.10:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32821 66.90.78.182:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32823 128.10.252.9:123 ESTABLISHED 5442/ntpd
udp 0 0 10.0.0.9:32839 24.199.24.170:123 ESTABLISHED 5442/ntpd
Similar Messages
-
My installation of photoshop elements 13 was interrupted, I can't seem to get it restarted, so I restarted my computer and am still unable to start the download again. What do I do to get the download restarted?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7. How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
Since updating to IOS7.0.3 can not seem to get more signal on my iphone 5 with my manager H3G ita what I have to do I also tried replacing sim with no effect, also on ipad 2
So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes. -
I can't seem to get gmail from my apple mail account. I have removed the account and added it, but it says I have the wrong password. I close gmail and get in just fine. What's up?
I meant that I sign out, sign back in ok. Ergo, I know my password. Someone here on the support page (you?) told me the culprit is the 2 step verification process which I had on. That makes a lot of sense as Apple mail won't get a code thereby jamming up the process. I could not even start a new account until I took that 2 step process off. Everything fine now thank you.
-
Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?
You went from the wrong direction. Start with Nikon website and the WU-1a adapter. click on the download at the App store....
http://www.nikonusa.com/en/Nikon-Products/Product/Wireless/27081/WU-1a-Wireless- Mobile-Adapter.html
It will take you to the App. -
I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.
This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?
-
I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
and have not been able to print - much less do anything else with it.
My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
I know I can't be online and print at the same time unless I get a router.
I also know that I can go offline and change the network pref to "airport" so I can print. Meaning I'll have to change
back and forth but for my uses, that's ok..at least for right now.
What I can't seem to get set-up correctly is my own local network.
I'm pretty sure it's suppose to be done using "Airport".
Obviously, I'm doing something wrong in establishing my network.
The printer is listed on my printer preferences and shown as "offline" "default". I assume that means the ENVY
is my default printer. Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
Now, if someone could just tell me exactly, step-by-step what to do to get that done....
I'd be soooo very happy!
Thank you!
RickiWell... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out! -
I have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?
i have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?
You have to input your Apple ID in the prompt when it pops up
-
I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?
I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td> -
I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...
viiram wrote:
It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
the most you can do is record to 2 tracks at a time; skim this tute to see how:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen) -
On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Is that even a thing? Is there another app I can download to have access to my contacts with imessage?
That comes with iOS 5 (Settings>General>About>Version) and only the 3G abd later iPods can go to iOS 5 or later
Identifying iPod models
Maybe you are looking for
-
I have a 20GB iPod with a click wheel and black and white screen. Recently, the hard drive on it has failed and refuses to play any music. What should I do?
-
Error " song can't be used because original file can not be found"
Our computer was about to crash, so we backed up our iTunes library to disc like it suggested. However, once we imported the library back to the new computer, iTunes will no longer play the songs without the disc in! It says the "original file can no
-
Hi I was in a pc shop today and saw a pc to tv cable (it also works with macs) do you think this cable would allow you to watch imovie on your TV (which you can then record to tape or dvd) if anyone has tried this or has any theories, will they let m
-
How do I manage and catalogue photos from an external hard drive
My new laptop is fast, but does not have a huge amount of storage. Therefore, the store advised I keep the photos on an external hard drive However, when I am in elements and want to have my list of folders - under folders - so I can then catalogue
-
How can I re-enter my ID & serial # for Photoshop Elements 4.0
I downloaded Photoshop Elements 4.0, installed my ID and serial # as requested, and now when I try to use the program I get a message telling me that my ID or serial # is invalid, and that the program needs to exit.