Can't seem to get sort-object working in powershell widget

I'm experiencing a bit of exasperation with the powershell widget in SCOM 2012 - go easy on me though, this is my first time posting and I'm a bit of a newbie with powershell.
Because of the issues with the logical disk space performance widget and multiple disks (if you have 3 disks attached you get 9 results back) I've been trying to adapt a script somebody else wrote (http://blogs.technet.com/b/lukaszr/archive/2014/06/18/how-to-get-nice-logical-disk-state-view-using-powershell-grid-widget.aspx)
as I want something slightly different.
My objective is to list the 10 servers with lowest free GB space. The script I've been trying to adapt just lists all disks on all servers.
Here is my modified version of the script
$disklist = @()
$disks = Get-SCOMClass -Name "Microsoft.Windows.Server.LogicalDisk" | Get-SCOMClassInstance
foreach ($disk in $disks)
$query = GET-WMIOBJECT –query "SELECT * from win32_logicaldisk where DeviceID = '$disk'" -ComputerName $disk.Path | Select-Object Size, FreeSpace
$size = $query.Size
$free = $query.FreeSpace
$percent = $free / $size
$pervalue = "{0:P0}" -f $percent
$sizeGB = "{0:N1}" -f ($size / 1024 / 1024 / 1024)
$freeGB = "{0:N1}" -f ($free / 1024 / 1024 / 1024)
$diskobject = $ScriptContext.CreateFromObject($disk, "Id=Id", $null)
$diskobject["Server"] = $disk.Path
$diskobject["Drive"] = $disk.Displayname
$diskobject["FreeG"] = $freeGB
$diskobject["FreeP"] = $pervalue
$diskobject["FreeTotal"] = ($freeGB + " / " + $sizeGB)
$disklist += $diskobject
$GBdisklist = $disklist | Sort-Object -Property {[float]($_.FreeG)} | select -first 10
foreach($thing in $GBdisklist) {
$ScriptContext.ReturnCollection.Add($thing)
My thinking was to put all the info into one big collection, then sort that by free disk space and select the top 10, then pipe those back into the scriptcontext collection for displaying. It's slightly unwieldy, granted, but works fine in standard powershell
(after changing the scriptcontext bits), just not the widget!
It all seems to work, and brings back data, except the data that comes back has clearly not been sorted before having the top 10 selected. It's as if the sort command is completely ignored. I've tried quite a few variations on the script sort/sort-object
with or without -property in desperation as I seem to be so close, but yet so far.
Any help would be appreciated!
Pete.
Incidentally, this is the script that works perfectly in standard powershell:
$disklist = @()
$disks = Get-SCOMClass -Name "Microsoft.Windows.Server.LogicalDisk" | Get-SCOMClassInstance
foreach ($disk in $disks)
$query = GET-WMIOBJECT –query "SELECT * from win32_logicaldisk where DeviceID = '$disk'" -ComputerName $disk.Path | Select-Object Size, FreeSpace
$size = $query.Size
$free = $query.FreeSpace
$percent = $free / $size
$pervalue = "{0:P0}" -f $percent
$sizeGB = "{0:N1}" -f ($size / 1024 / 1024 / 1024)
$freeGB = "{0:N1}" -f ($free / 1024 / 1024 / 1024)
$diskobject = New-Object System.Object
$diskobject | Add-Member -MemberType NoteProperty -Name "Id" -Value $disk.ID
$diskobject | Add-Member -MemberType NoteProperty -Name "Server" -Value $disk.Path
$diskobject | Add-Member -MemberType NoteProperty -Name "Drive" -Value $disk.Displayname
$diskobject | Add-Member -MemberType NoteProperty -Name "FreeP" -Value "$pervalue"
$diskobject | Add-Member -MemberType NoteProperty -Name "FreeG" -Value $freeGB
$diskobject | Add-Member -MemberType NoteProperty -Name "FreeTotal" -Value ($freeGB + " / " + $sizeGB)
$disklist += $diskobject
$GBdisklist = $disklist | Sort-Object -Property {[float]($_.FreeG)} | select -first 10
$GBdisklist | ft

After hacking the code around massively I've managed to solve the issue with it and made it a lot neater in the process. Still unsure what the issue was, but I think it helps to sort the output of the diskinfo first before starting with any of the info processing
/ scriptcontext adding
$disklist = @()
$rawdisks = Get-SCOMClass -Name "Microsoft.Windows.Server.LogicalDisk" | Get-SCOMClassInstance
foreach ($disk in $rawdisks)
$diskdetails = GET-WMIOBJECT –query "SELECT * from win32_logicaldisk where DeviceID = '$disk'" -ComputerName $disk.Path | Select-Object PSComputerName, DeviceID, FreeSpace, Size
$disklist += $diskdetails
$top10disks = $disklist | Sort-Object -Property FreeSpace | select -first 10
foreach ($object in $top10disks) {
$size = $object.Size
$free = $object.FreeSpace
$percent = $free / $size
$pervalue = "{0:P0}" -f $percent
$sizeGB = "{0:N1}" -f ($size / 1024 / 1024 / 1024)
$freeGB = "{0:N1}" -f ($free / 1024 / 1024 / 1024)
$dataObject = $ScriptContext.CreateInstance("xsd://foo!bar/baz")
$dataObject["Id"] = (($object.PSComputerName).ToString() + ($object.DeviceID).ToString())
$dataObject["Server"] = ($object.PSComputerName).ToString()
$dataObject["Drive"] = $object.DeviceID
#$dataObject["Free GB"] = ($freeGB).ToString("0000.00")
$dataObject["Free GB"] = ($freeGB).ToString()
$dataObject["FreeTotal"] = (($freeGB).ToString() + " / " + ($sizeGB).ToString())
$ScriptContext.ReturnCollection.Add($dataObject)

Similar Messages

  • HT204291 I can't seem to get AirPlay to work on my iPads, works fine on my iPhones on the same network, any suggestions?

    I can't seem to get AirPlay to work on my iPad's, it works fine on my iPhone 5's on the same network, any suggestions?

    http://whirlpool.net.au/wiki/three_email
    Have you tried contacting your ISP for support? Can you confirm that the email is suppose to be over Port 110 and not 143, or 995/993?

  • I just purchased a Brother MFC-9340CDW all in one printer.  It shows up on a list of compatable airprint devices but I can't seem to get it to work.  Any suggestions?

    I just purchased a Brother MFC-9340CDW all in one printer.  It shows up on a list of compatable airprint devices but I can't seem to get it to work.  Any suggestions?

    Hi,
    It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
    you will need to use the serial cable to start the process:
    In-brief Version:
    0) Go grab the firmware update tool, the driver, and the scanner software
    1) Turn off the firewall and antivirus (if you use it ??)
    2) Update the firmware using the serial line
    3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
    4) Configure the printer to use a static IP through the front panel
    5) Configure the printer WIFI with your SSID and net key through the front panel
    6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
    7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
    I generally use this kind of set up so that the printer comes back at the same place after a power failure in
    the event that it has a crappy driver.
    For those of you who need a little more help:
    0) Turn off anti-virus and firewall software (it did seem to matter)
    1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
    2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
    3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
    4) Install the firmware update tool by double clicking on the dmg you downloaded
    5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
    6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
    7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
    8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
         boot method: static
         IP address: the address you chose in 7)
         mask: 255.255.255.0
         gateway: the IP of your router -- typically 10.0.1.1
    8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
    9) Reboot the printer and check it connects to your wireless network
    10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
    are what you think they should be.
    11) Go to your computer, bring up a terminal (applications->utilities->terminal)
    12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers  -- you won't need it anymore -- if not you screwed up somewhere along the line
    13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
         click +
         in the add menu click IP
         enter your IP (from step 7)
         make sure the Protocol is IPP
         Name the printer and set its location
         Go to Use field, in the pull down menu select "Select Software"
         Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
    14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
    it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
    15) Go open a word document and print it -- smile you are nearly there
    16) Install the scanner software by double clicking the dmg
    17) Open the Control Center, under the Model: select Other
         Click +
         Select your printer
         Enter your computer name in the display name and click ok
    18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
    19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
    20) Put a document in the top of the printer and press scan -- wammo !
    21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
    22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
    23) try printing and scanning again...
    24) rejoice... your done.

  • Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

    Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

    Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.

  • I am attempting to transfer my contacts from my Android phone to a new Lenovo Yoga 2 computer via the intouch app and I can't seem to get it to work.

    I am attempting to transfer my contacts from my Android phone to a new Lenovo Yoga 2 computer via the intouch app and I can't seem to get it to work.

    Maybe I'm not understanding but it appears that your question refers to a transfer from a non-Apple phone to a non-Apple computer. If that is correct, this forum is likely not the best place to get an informed answer.

  • Hello please can you tell me how to set up AirPlay as I can't seem to get it to work!

    HI I've recently brought a Apple TV tired to set it up yesterday to watch cartonn hd but can't seem to get it to play on my TV am I doing something wrong?
    aany help gratefully received  

    Hello Pepsimax1972,
    Thank you for using Apple Support Communities. 
    I see you are having difficulties in getting your Apple TV to play on your TV. The following article provides some basic troubleshooting steps to help you sort out what might be going on. 
    Apple TV: Basic troubleshooting - Apple Support
    Regards,
    Jeff D. 

  • New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime.  I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

    I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows.  Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
    I've installed soundflower but now the micropohone is not working in facetime.  What is the proper way to set all this up? 
    Thank you!
    Frank

    O.K. fgonoz98
    I would do 1 thing at a time:"now the micropohone is not working in facetime"
    Here is what you can check to get your mike working in facetime:
    1. Hold down option while you click on the speaker next to time a. date,
    under input Device see if your mic is marked. If not: ✔️
    2. Click the apple top left/System Prefs./click on the Sound speaker:
    under Input highlight microphone.
    3. When you have factime on go to video above scroll and see if your mic is marked ✔️
    If that does not get it to work there is more you can check:
    (Utilities/Audio, midi setup)
    For any other audio device you do this for input and output.
    If you get stock post back

  • I have the new iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to get it to work....

    I have the iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to do it, any suggestions??

    Make sure you have selected to sync your entire library, or have checked the songs you want to sync.  This might help: http://support.apple.com/kb/ht1351

  • Can't seem to get VPN to work ... how difficult can it be?

    Okay. I'm a Mac IT professional, but have never had the need to do VPN for a client until now. The client has a Mac Pro server running 10.5.6 Server Unlimited. The router is a brand-new Apple Airport Extreme base station doing DHCP and NAT from 10.0.0.2 to 10.0.0.200. The server is set to 10.0.0.250 and the base station is forwarding all inbound traffic to the server at 10.0.0.250 (DMZ). Access from the outside for AFP, ScreenSharing, Server Admin, Workgroup Manager, etc -- all working.
    The server has a domain name of "server.client.com" and the server is running Open Directory, Kerberos is running, and all DNS info seems correct.
    When I turned on VPN, I enabled L2TP over IPsec and entered 10.0.0.201 as the beginning address and 10.0.0.210 as the ending address since they are out of the DHCP scope of the Airport Base Station. I also tried 10.0.1.201 to 10.0.1.210. I have PPP Authentication set to MS-CHAPv2 and on my client computer (MacBook Pro running 10.5.6) I configured the client authentication to "password". I've confirmed that I'm entering the correct password, and I've also tried Kerberos authentication. I will point out, however, that when I open Kerberos Utility on my client workstation, it is unable to get a Kerberos ticket from the server. Not sure why. I know I've typed the "shared secret" correctly on both computers because I'm just using a simple word for now while configuring and testing the service.
    I've tried turning off the firewall just to be sure that it's not blocking my connection.
    When I look at the Overview tab for VPN, it shows that L2TP is running. When I look at the log for VPN service on the server, it doesn't show anything.
    Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
    Does the server need to be running DHCP in order for VPN to work? And if so, can I continue to have the Airport Base Station do DHCP if the server is doing it? If the server needs to run DHCP, I'd prefer to have it run DHCP just for the VPN clients and not the rest of the network.
    Am I missing something?

    Does your server have only one interface?
    I've never seen the VPN software work in this configuration. Usually you have one public interface (where VPN clients connect to) and a separate internal interface (where the secured systems are).
    I don't know if it's possible to run in this way given that all incoming VPN connections will appear to come from a LAN address (thanks to the NAT router), and you wouldn't normally have a LAN client connect via VPN to the server to talk to devices on the same LAN.
    Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
    That doesn't matter - it relates to OUTgoing connections from clients on the LAN to remote VPN servers, not incoming connections.
    The other place to look is in the router - make sure the relevant ports are being forwarded to the server. If all ports are (as you say) then this might not be an issue (although I seriously question the sanity of running your network this way).
    You should also run a tcpdump on the server looking for traffic from the client. That will tell you whether the connection is even getting to the server.

  • I can't seem to get  my iCloud working between my iPhone and iPad

    My wife and I recently purchased (in This order) an iPad, then 2 iPhones, then a second iPad. My iCloud on my devices is working fine. We are having trouble getting my wife's to work. I checked again, and was sure I had done what I was supposed to do to set hers up. She had her iPhone for a week or so before we got her iPad. We may have registered the phone with one Apple ID, and the pad with another. How can we get the two in sync?

    Hi
    So the problem we are working on is just your wife's iPhone nad iPad right?
    It sounds like you have a pretty good handle on the detailed screens.
    I think the key is to log out of your devices and then sign back in with only ONE ID on each device.
    Let's start with
    1. Settings
    2. Itunes and Apps stores
    3.  Tap on the Apple ID (willlook like your wife's id).
    4.  Tap sign out
    5.  Enter your preferred Apple id and password
    6.  Tap sign in
    7.  Check Settings> iCloud... should be the correct iCloud Id now (and greyed out)
    Do this on each device.....

  • Snap to beat markers:  I'm using iMovie 11.  Trying to prepare short movie of holiday using 2 or 3 songs and snap to beat feature.  It worked great for first segment/song but I can't seem to get it to work for the second song.  Help please.

    I'm using iMovie to prepare a short holiday video.  Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills.  I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers.  Can anyone help please.  Thanks.

    I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
    One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
    Thanks for any help on this.

  • When watching Netflix On my ipad i can't seem to get airplay to work (apple TV)

    I've used Airplay before on Netflix and transferred to Apple TV but all of a sudden it doesn't seem to work. Note:  I was able to get music to play on Apple TV however...help. Do I have something disabled?

    You are making perfect sense...that could be why it doesn't work...I thought it was something i was doing wrong??? Like I said I thought I'd done it before so I was trying to figure it out.

  • Can't seem to get Blackberry messenger working on my phone 9300

    how do I get my bbm to work it says under connections that it is not activated but I have downloaded the bbm as an app on my phone?
    When I go to add someone's pin it just countinues to say waiting athorization, I have the most recent updates for my phone, plus I have tried wiping my phone back to factory settings and have repeated the process, I am with the carrier Fido if that helps, anyone knows that would be greatly appriciated. Thanks in advance.

    Greetings,
    Click anywhere on your desktop (your background)
    Go to the "Go" menu at the top of the computer screen
    Click on applications
    Look in this list, you should see "iPhoto"
    If you can't find iPhoto in the Applications folder (where its supposed to be) try searching the computer for it:
    Click anywhere on your desktop (your background)
    Go to File > Find
    Click on "This Mac" at the top
    Type in "iPhoto.app" in the search bar on the top right
    If iPhoto shows up, drag it from the window to your desktop and then open the Applications folder (as above) and drag iPhoto to applications and try to open it up.
    If you cannot locate iPhoto, then try to download it again from the Mac App Store (Apple > App Store).  Please report any error messages you encounter verbatim.
    Hope that helps.

  • Problems with AJAX, can't seem to get it to work

    Hello! I've just downloaded DWR and I've been going through the samples of it. I attempted to make some test pages but the javascript says that the class I'm using is undefined.
    I'm using Firefox and in the Javascript console it says
    "Error: <the classname that i used> is undefined"This is what the web.xml file looks like
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
      <display-name>DWR (Direct Web Remoting)</display-name>
      <description>A demo of how to call Java on the server directly from Javascript on the client</description>
      <servlet>
        <servlet-name>dwr-invoker</servlet-name>
        <display-name>DWR Servlet</display-name>
        <description>Direct Web Remoter Servlet</description>
        <servlet-class>uk.ltd.getahead.dwr.DWRServlet</servlet-class>
        <init-param>
          <param-name>debug</param-name>
          <param-value>true</param-value>
        </init-param>
        <init-param>
          <param-name>scriptCompressed</param-name>
          <param-value>false</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
      </servlet>
      <servlet-mapping>
        <servlet-name>dwr-invoker</servlet-name>
        <url-pattern>/dwr/*</url-pattern>
      </servlet-mapping>
    </web-app>I actually just copied this cause seeing that it worked in the samples.
    And here's the dwr.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE dwr PUBLIC "-//GetAhead Limited//DTD Direct Web Remoting 1.0//EN" "http://www.getahead.ltd.uk/dwr/dwr10.dtd">
    <dwr>
       <allow>
        <create creator="new" javascript="CorrUpdate"> // This is the part where the class that dwr in the javascript will be using
          <param name="class" value="com.ats.ocfg.CorrUpdate"/>
        </create>
      </allow>
    </dwr>Just for testing, I put one class in it, CorrUpdate. All the classes are in their proper places.
    Lastly here's a simple Jsp page
    <%@ page contentType="text/html; charset=utf-8" language="java" import="java.sql.*" errorPage="" %>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    <script type="text/javascript" src="./dwr/engine.js"></script>
    <script type="text/javascript" src="./dwr/util.js"></script>
    <script language="javascript" type="text/javascript">
         function update() {
              CorrUpdate.getCorrModels(createList, $("corrType")); // This is that class. The error is on this line saying that it can't find "CorrUpdate". I don't know why this is, since I've defined it in the dwr.xml file
         function createList(data) {
              DWRUtil.removeAllOptions("corrModel");
              DWRUtil.addOptions("corrModel", data);
         function init()
              DWRUtil.useLoadingMessage();
              update();
    </script>
    </head>
    <body>
    Corr type:
      <select name="corrType" style="width:100" onchange="update();">
           <option value="A">A</option>
         <option value="B">B</option>
      </select>
    <br />
    Corr Model:
         <select name="corrModel"  style="width:200">
         </select>
    </body>
    </html>What the page is supposed to do is to change the second listbox based on what is selected on the first.
    Any AJAX gurus in here?

    In your jsp you need to give one more entry saying <script type='text/javascript' src='xxx/xxx/corrUpdate.js'></script> . Path of the js can be obtained from http://localhost:9080/xxx/dwr .

  • I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

    I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Bridge does not open and computer crashes

    Please help. I have Photoshop CS3 and when I try to open Bridge in any way it never opens and then whole computer crashes. I have to push and hold the power button to turn off and then restart the whole thing. I can use PS but must open pictures with

  • Terrible terrible cpu performance with pixel updates

    Hello all, I had been working on a Lemmings implementation, since those lemmings are digging, bashing etc. the surface was changing and I chose a per pixel implementation for image operations. However the following code consumes %100 cpu at a 2ghz ma

  • R/3 Source System Check in BW

    Hi , We had a BW client Copy from Production to QA and DEV system. Last week, When I am trying to restore source system connection to R/3 after client copy by creating PORT and PARTNERPROFILES in BW system. I could restore connection in BW Dev but no

  • OWB Workflow Schema Installation

    Hi, Can anybody post what are all the essential softwares and Hardwares needed for creating Workflow schema in OWB 10g R2. Do we need to install the Workflow Server first and then the OWB Repository? Or Can i able to add Workflow Schema in the existi

  • BarCode Not Printing

    Hello Gurus - I'm trying to create Delivery No for bar code. Unfortunately it is not working. Front End Setups Done and Installed in Local Machine: Font Name : 3OF9 File Name: 3OF9.TTF Syntax for BarCode I used: <?xdofx:'*'||C_DELIVERY_NAME||'*'?> Ca