Can't seem to render only a small section of film

Dear All,
I've been trying to finish a film which is made up of still images, audio and (the only effects) dissolves. When, having made an adjustment to an image, I try to render just that small section, there seems to be no change. My timeline is still marked with a green 'unrendered' line. I've tried highlighting the two relevant shots and then rendering them, but no dice. I looked on the forum, and I quote your excellent Tom Wolsky:
"You can render a part of the timeline by making sure nothing is selected in the timeline and marking In and Out points"
I've tried that too. Still no luck. For the record, the command I'm using is "Cmd-R" rather than "Alt-R", which renders the entire file. But the latter seems to be my only recourse, and takes at least an hour each time! Surely I'm getting something wrong ...
Look forward to your help!
Roger

Thanks, Tom. Your speedy and clear response is much appreciated.
I've just taken your first suggestion (checked the green bar in Sequence-Render Selection) and it seems to be working - but the progress bar still tells me that it's going to take around 20 minutes. Is this reasonable? Or do I have further difficulties? When I've tried to play the sequence without rendering it's got stuck, and a dialog has told me that 'one or more frames were dropped during playback'. I've tried keeping RT playback to 'safe' etc., but this situation doesn't seem quite the optimum. Am I still missing something?
Thanks again,
Roger

Similar Messages

  • Lighting effects seems to render only in bitmap

    it started about a week or so ago but when i tried using the lighting effects filter rather than showing  a shadowy gradient effect like it usually does it is either pue blakc or just shwos an unnafected picture and when i play with the lighting rig or change slider settigns like texture for example it flickers back and forth like it's broken
    but it works perfeclty in CS5 without a hitch.
    i tried searching to see if others had a similar problem but all i got was that CS6 either didnt coem with it installed or the app doesnt display correclty. i dont know what to do i dont want to keep goign to an older photoshop just to use it's basic features.

    Kind:  Application (Intel)
    Size:  564.7 MB on disk (560,095,713 bytes)
    Where:  /Applications/Adobe Photoshop CS6
    Created: Monday, June 18, 2012 2:04 PM
    Modified:  Monday, June 18, 2012 2:04 PM 
    Version  13.0.1
    Copyright:  Copyright  © 1990-2012 Adobe Systems Incorporated
    it says nothing about bit versions. unless thats what version means. but i dont know how to read it.

  • Firefox 3.6.13 upgrade prints only a small section of a web page on each printed page

    Firefox prints as though the left, right, and bottom margins are very large, so that printing occurs in a small rectangle (1" wide x 3" high) centered toward the top of the page. The print preview shows the same small rectangle of text except that it is located at the left of the screen instead of centered. The result is that many paper pages are printed for each web page (e.g., 15 pages to print http://meyerweb.com/eric/articles/webrev/200001/example3.html whereas IE8 prints this in 2 pages). This occurs for all web pages that I have tried to print and is not isolated to a particular web site.
    In the print setup, all margins are set to 0.5". I have tried resetting these but it didn't help.

    When I do Ctrl+P from within Firefox and then select Properties for the HL-1440 printer driver, the paper size is A4 which gives the printing problem. Changing the paper size to Letter from within Firefox still gives the same problem.
    Correction from previous post: Before printing with the LaserJet 4 printer driver (while the HL-1440 driver is still the default), the print-preview shows the small rectangle of text (see the image of my previous post). However, once I print using the LaserJet 4 driver (which prints correctly) then any subsequent print-preview while using the LaserJet 4 driver correctly displays the page (full width and height). Hence, there seems to be some conflict between this version of Firefox and the factory HL-1440 driver.
    Note: All printing is done to the same physical printer (Brother HL-1440). In all cases the printer properties are set to Portrait and Shrink-to-fit.

  • When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

    I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button.  I also realized that the upper portion of the volume key does not seem to work properly.  Any solutions?

    i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
    what should i do, i dun like going to the store in exchange for a refurb one

  • How do I print only a small section of a very large spreadsheet

    I need to print only the first 15 colums and 240 rows of a huge spreadsheet in Numbers '09.  Any ideas on how to do this?
    thank you for any assistance.

    Method 1.  Hide the columns beyond the 15th and all the rows beyond the 240th. Then Print.
    Method 2.  Select and Copy the range you want to print. Insert a new Sheet, and delete the default blank talble in the new sheet. Edit > Paste Values onto the new sheet. Print the new Sheet.
    Method 3.  Select and Copy the range you want to print. Switch to Preview.app. Command-N, Command-P.
    Jerry

  • I can't seem to find the 'file sharing' section in iTunes.

    I know it should be on my devices and then in the 'apps' button at the bottom but it simply isn't there...
    Could anyone help?

    Just to be sure, you click on the device in the iTunes sidebar, and then you click on Apps in the bar across the top, right? Not Apps as filed under the device's name in the sidebar?

  • I can't seem to make a working profile to connect to office 365 on a windows 7 pc with only the mapi cdo runtime version 6.5.8320.0 installed using mfcmapi nor programmatically

    Hi,
    I have been struggling with this for a few days now.
    i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi (HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail) .. it is.
    I downloaded the lastest version of mfcmapi, which i believe was the version of december 2013
    but i can't seem to create a profile for office 365 in it. I followed http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx and then i changed the properties to what was proposed here http://blogs.msdn.com/b/dvespa/archive/2013/07/15/create-profile-connect-mfcmapi-to-office-365.aspx
    That did not work, i keep getting an error one ore more properties are invalid when i try to use that created profile to connect to office 365 (from within mfcmapi).
    I also changed some of those proposed values to what autodiscover was telling me like setting PR_PROFILE_RPC_AUTH_PACKAGE to RPC_C_AUTHN_ANONYMOUS which should be the value $8000F001 instead of RPC_C_AUTH_NONE (at least i think so)
    I builded a simple program to encrypt my password using CryptProtectData and entered the value using mfcmapi in PR_PROFILE_AUTH_PASSWORD as was suggested in the last page.
    but nothing seems to work, i keep getting wrong configured errors and i'm totally clueless atm. This is supposed to work right on a pc where outlook is not installed ?
    I also tried this on another pc where outlook 2010 is installed and i am able to create the profile there and connect without a problem given that i enter the logon credentials once and let them be remember (they get stored / cached in the windows key store,
    like when using CREDWRITE function) from then on i can connect without a problem.
    also when calling configuremsgservice on the EMS service i created for a new profile in mfcmapi and let the UI show i can see on the pc where outlook is installed in the UI options to enter proxy information however when i do the same thing on the pc
    where only the mapi cdo runtime is installed i do not see any UI option to configure the proxy server information ... is this normal ?
    Hopefully someone can shed some light on what i'm doing wrong or might be wrong.
    Thanks in advance
    Willems Davy

    The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • Creating iphoto book and can't seem to view/ work on only one page at a time.

    I am creating an iPhoto book and can't seem to view/work on only one page at a time.  The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page.  What am I doing wrong or how can I fix this.  It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

    My Navigator seems to be to large.  It covers 1 1/2 pages while in the training information it shows as the size of one page.  Is there a way to adjust the size of the Navigator?
    You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
    Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
    Regards
    Léonie

  • Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant

    why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant rendering means its almost impossible to edit anything. Please help.

    H TheGamer
    What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
    Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
    Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
    I am not approving or disapproving of this project feature, just commenting on the what is.
    This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Please consider.
    ATR
    Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

  • I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appr

    I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.

    OK, it now sort of works. A couple of problems here:
    After updating IOS, Safari iCloud was "automatically" switched off
    Switching it on had no effect
    resetting my iPad automatically switched off safari iCloud again
    after switching it back on, it said "turning off safari data"
    switched it off and on again, now it said : "turning on safari data" and the sync worked
    On IOS 7 no problems
    The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store. How do I "log out"

    I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store.
    How do I "log out" or "sign out" of iCloud on my iPhone? There is an option to delete the account, but I just want to log off. I want to keep the account name for future use.

    @fernandamagalhaes
    It looks like the article below has the information you are looking for.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Turn off iCloud completely
    Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
    On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
    Note:   If you delete your iCloud account, iCloud will no longer back up your iOS data. You can still back up your device in iTunes (for more information, open iTunes and choose iTunes > Help). 
    On your Mac, open iCloud preferences, then click Sign Out.
    If your Mac has OS X v10.7.5 and you turn off iCloud, your calendar information and reminders aren’t stored locally in iCal. If you want to retain your calendar and reminder information, you need to back it up before turning off iCloud. For more information, see the Apple Support article iCloud: Calendar & reminder data removed from Calendar and Reminders or iCal when disabling iCloud Calendar.
    On your Windows computer, open the iCloud Control Panel, then click Sign Out.
    Note:   If you turned on automatic download of music, app, or book purchases (in iTunes preferences or in Settings on your iOS device), your iTunes purchases are still downloaded to your devices.
    Set up iCloud on your devices

  • I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

    I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

    in the iPhoto preferences  change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
    LN

  • I've downloaded CS6 Master Collection but only see The Photoshop icon.  I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

    I've downloaded CS6 Master Collection but only see The Photoshop icon.  I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

    How about you give us some real information.
    Did you install the software? What operating system?

  • Many times I drop a photo into a book page box and it resizes it.  I want to scale it smaller but it only allows me to make it bigger.  Why can't I slide to make it smaller?

    many times I drop a photo into a book page box and it resizes it.  I want to scale it smaller but it only allows me to make it bigger.  Why can't I slide to make it smaller?

    Control (right) - click on the photo in the frame and select Fit to Frame Size in the contextual menu.
    Here's an extreme example of that:
    OT

Maybe you are looking for