Can't select allow on prompt

When a web site tries to start flash the prompt appears but I
am unable to select *allow* or *remember*.. it stays stuck on
*Deny*. Anyone else have this problem or know of a fix... I have
uninstalled and re-installed the latest version. HP Pavilion
Notebook running 32 bit Vista.

I found the problem, but not the solution.
The problem was that the "admin" group ceased to exist. I got into dscl, and tried to recreate this group, but I never could. I could create other groups, e.g. "foo", but not "admin".
I ended up reinstalling, and now everything is okay. Annoying, though.

Similar Messages

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

Regarding Can we store User Selected values in prompts

Please help us in achieving the below requirement.
Requirement is to store User Selected values in prompts when the report is opened by a User for the first time and make use of those values to refresh the report next time onwards.
1.Can this be achieved in WebI ?
2.If it is thru SDK(we use Java), any experience/help in doing this ?
Environment : BO XI 3.1 with SAP BW Integration

Hi ,
If you dont want data to be displayed in this report for this two values , then exclude this two values when you restrcit your characteristic to the variable.
If you want not to display this values when user opens help for entering the values where he can see all the possible values for selection for the variable, then it wont be possible.
Hope this will help.
- Jaimin

I stream video/audio from my iPhone to AppleTV and it works fine. I want to use headphones on the iPhone so I can stream the video and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one.

I stream video/audio from my iPhone to AppleTV (like YouTube) and it works fine. I want to use headphones on the iPhone so I can stream the video to AppleTV and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one. How can I watch AppleTV and listen on the headphones?
Thank you.

have the same problem. Im using iPad 3 and Apple TV. id like to use the ipad as wireless earphones while i watch the video on the tv. is that even possible?

HT1150 I have two shared printers and I want to be able to select the printer when it is time to print without having to set a default EACH time. Can I just have a prompt to ask me which printer to use???

I have two shared printers and I want to be able to select one printer when it is time to print without having to set a default EACH time. Can I just have a prompt or dialog box that will ask me which printer would you like to use??? The only options I can find are "default" and "Last printer used" which means I must go into the Print & Fax area and change the default EACH time I want to print??? Seems very low tech.....

junnybug wrote:
Can I just have a prompt or dialog box that will ask me which printer would you like to use???
In most cases you get this dialog box every time you print. It is called the print dialog and normally when you print, a print dialog appear showing the printer that is to be used. Which printer you see will be based on what you have set in Print & Fax as you mention. But regardless of what you have set there, you still have the option to change the printer via the print dialog.
If you are using an application that does not show the print dialog, like MS Word and that stupid "print one copy" print icon in the toolbar, then you can often change the action the print icon uses so that the print dialog appears.

Set preset values that can be selected from a pull-down manu

I am writing a VI in LabView 7.1 to collect data. I have a set of variables that need to be set at the beginning. I used Basic Information subVI to input these variables to be saved in the data file header, but everytime I run the VI I have to type in pretty much the same thing. The variables I use usually can be selected from a list of number, text or Y/N. I thought about using Configure File VI, but I think that will only give me a fixed set, not a choice. I wonder if there is a way to preset a list of variables so that I can select one value from the list rather than type in everything each time.
Thanks,
Ron

1. Write a Vi that have all your variables i.e. enum, ring, text controls, boolean controls etc
When this Vi is called, it allows user to configure all settings
There will be a "save" button. Upon clicked, it should prompt user to input a filename (i.e. *.ini) and the file will be saved to a pre-determined directory i.e. LabVIEW Default Directory
With the above, a new *.ini file is created for respective set of variables.
2. Knowing that all *.ini files are stored at LabVIEW Default Directory, make use of the attached example VI, modify it to suit your needs, to get all *.ini filenames and update to the Combo Box control
With the Combo Box control, you can now choose the desired configuration file (*.ini) to be loaded for the rest of the test needs.
3. The selected *.ini file path is now input to a Vi that does the extraction of all variable settings from the selected *.ini file.
Above is just one of many ways that you could have a pull-down menu for selecting a set of settings from a set of configuration files.
Hope this make sense to you
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_CFIO_Get Filenames to Combo Box.vi ‏30 KB

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How can I select folders to add to my iTunes all at once?

I have all of my music based in a separate folder from my iTunes, and it is also backed up on an external hard drive in the iTunes library because I have my preferences set to "Copy Files to iTunes Media folder when adding to."
The problem is, when I click add folder to Library, I can only select one folder at a time. I want to add multiple folders, but not all of the sub-folders that are contained underneath the same folder. I used to be able to do this, with a window that allowed me to use the ctrl key to select multiple folders. I used to click the folder everything was in, and it would open that folder so I could select the certain folders I wanted. Now, I get a window only with a + next to folders that opens up the subfolders and I can only select one.
How do I get back to the other style of window? It is not my version of iTunes because I have updated it on all of my computers/laptops, and the one laptop I use iTunes with the most is the only one that gives me this problem. Moving my music folders (or even copying them) to a new folder to add them is not an option. I am dealing with too much music and I'm not willing to waste that much time, especially when I know there is an easier way that I used to be able to use.

Hello rudyray,
Thanks for the question. After reviewing your post, it sounds like you want to adjust view options. I would recommend that you read this article, it may be able to help the issue.
OS X Yosemite: Ways to view items in Finder windows
Further customize Icon, List, Column, or Cover Flow view
You can customize each view to accommodate your preferences. For example, you can change the text size of file names and, in some views, change the size of file icons.
Select a folder in the Finder, then click a View button: Icon, List, Column, or Cover Flow.
Choose View > Show View Options, then set the options you want.
To have the folder always open in the view, select the “Always open in” checkbox.
To have subfolders also open in the view, select the “Browse in” checkbox.
If a subfolder opens in a different view, select the subfolder, choose View > Show View Options, then deselect the “Always open in” and “Browse in” checkboxes. The checkboxes must be selected for the main folder and deselected for the subfolder.
To use these settings for all Finder folders that are in this view, click Use as Defaults.
For example, if you set options for Icon view, then click Use as Defaults, all folders in Icon view appear with the same options. Use as Defaults isn’t available for Column view because the settings apply automatically to all folders in Column view.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

In photoshop elements 12 i try to select multiple people to view in organize but can only select one

in photoshop elements 12 i try to select multiple people to view in organize but can only select one person at a time. if I try to select two or more people to see their pictures, I get nothing. I try to use CTL-click, but that does not work

Hi,
Try switching to Media view and then go to Find -> By Details.
Set the field to People and select the persons name.
You add further people by clicking on the + sign
The two options above the search criteria allow you to select all photos containing at least one or only ones with all of your selections.
The search can be saved in case you want to repeat it a later time.
Hope that helps
Brian

Design View - Can't Select Text, Only Divs

This is a page I did not build, and I hope I can describe this properly. Here's the published page -
www.wheeltime.com
I'm in CS4 and there are two things going on when trying to edit in design view. The first is I can't select text of content. Clicking to select said content, say a line of text or a word, selects and highlights the entire div container and all the content within in one big chunk. Why is DW not letting me select the actual content? This is the first time I've enver encountered this issue.
This is the same for all the div ontainers on the page. But another, perhaps related problem, has to do with this content area. In design view, there's a fixed height, so not only can I not select the content, but I can't see it all. It's OK in the browser, expands as it should. I've looked at all the properties anywhere and don't see any height attribute anywhere, especially those that enclose this area of content.
One this that has be wondering - this content area is warpped in a "main-content" div, with a class applied. But this div has no corresponding entry or properties in the style sheet. I can see where a div can be used that has no specific properies of it's own, but is it OK to not be mentioned at all in the style sheet? And can this affect what's going on in design view editing?
So, I guess the question is - what is governing this inability to edit in Design view? Thank you in advance!!

Have you tried double clicking the content?
I'm not sure what causes this exactly, but I downloaded your page and ran it in my DWCS4. It did the same thing until I double clicked the content of the divs. That allowed me to select it without issue from that point on.
It may have something to do with the content being wrapped in <span> tags within each <div>.
Onto your other question, your <div id="main-container"class="container"> is being affected by the .container class in your style.css file rather than a #main-container id.
EDIT: HTML id's like <div id="main-content"> serve to identify elements for many purposes, not just css. There is no problem with giving an element an id simply for organizational purposes, though usually they are used as targets for javascripts, css or php scripting purposes.

Can't select 'open in camera raw...' in Bridge

I have CS3 and I just recently updated my camera raw plug-in to 4.2. Updates have allowed me to see my CR2 files (instead of an icon) ; which was a problem before. But now I can't select the 'open in camera raw...' function in Bridge. The function is still listed in my 'file' menu, however it's grayed out and cannot be selected. I'm hoping this has something to do with a setting, or at least an easy fix. Any help or guidance on this would be extremely helpful! Thanks!

erin.h wrote:
I have CS3 and I just recently updated my camera raw plug-in to 4.2.
Camera Raw 4.2? The current version is 4.6.
If you can't access the Camera Raw command from Bridge with raw files, the odds are you didn't install it correctly...since you don't bother to state your OS, we can't really help you with WHERE to place Camera Raw (and only ONE version of Camera Raw) but you should go back and double check it's in the correct place for your OS.

Can't select videos for upload. All files are grayed out.

Ever since Safari 8, I am no longer able to upload videos to places like Amazon (for submitting video reviews.)
When I write a review on Amazon and choose Video Review as the review type, then click on the "Choose file" button, the files listied in the file selection window that opens are all grayed out. None can be selected. This only happens in Safari. I can use Chrome and Firefox with no problems.
Anyone else seen this?
Any ideas how to get this working?
I've reported it as a bug to Apple a month ago and was hoping the recent 10.10.2 Yosemite update would fix it but it didn't.

I see what you mean Michael ..
Might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Can't select *allow* on prompt

Similar Messages

Maybe you are looking for

Can't select allow on prompt