Can't select alternate outputs

Years ago, I ran a Logic Version called RPC-Pro on windows in tandem with Rolands' SI24 interface. I recently purchased an iMac and have installed Logic Pro 9. My old projects (.LSO files) from RPC-Pro load just fine in Logic 9, everything is intact except for the ability to change outputs on any channel strip. When the project loads, any given channel will display the last output I was using in RPC-Pro like Output 3-4 or 7-8, but it won't allow me to select my stereo output or any other output in the pop out box. They're all just greyed out. And further, if I change any of them from their initial output, it no longer allows that output as an option, greying it out also.
I'm able to go into the 'Audio-Bin' and playback individual audio clips, but cant select the working output and playback in the mixer. Is there a project or audio setting I'm overlooking? Something else? I'm not using any external devices for input or output. I just want to playback/mix my old projects via the built in output. Any suggestions appreciated...

I just bought a Roland SI-24 in hopes that it wouls be the control surface upgrade I been looking for but I cannot get it to link up....I have a G5 2.0 dual running logic 8.....any ideas? Thanks>

Similar Messages

  • I can't select "audio output stereo" on a track in the arrange window

    When I create a new song, in the Arrange window I can
    choose "audio output stereo" for a given track, and
    access the mixer's output from there. Fab.
    When I open a song that I oringally created using Logic 5,
    "audio output stereo" does not appear.
    Is this something about the file format?
    (a) is there something simple to do to enable that for
    older songs, or (b) is there a way to convert older song files to LE7?
    thanks,
    fred, san rafael.
    [email protected]

    Sorry, je suis un idiot.
    FYI. I went into the Environment window and found "Output 1-2"
    to be un-checked. Checking it now makes "audio output stero" an available option in that song.
    Thanks for listening.
    fred

  • Can't select input output and name media when using MRC1 log and transfer

    I am using a MRC1 from the Sony Z5E to film my media. I downloaded the plugin which allows me to log and transfer through FCP 6.0.6. The only problem is that it does not allow me to input/output and name the pieces of each clip that I want. Hence I can only import the whole clip and am wasting time and space with media that I do not want or need. Is there an additional plugin or setting to pick on FCP to get this feature to work?
    Rich

    Hi xhk, I'm a Kubuntu's user and I've had the same problems. I've been days reading on the Internet about this issue and finally I solve it by following this post from a Spanish tutorial: http://bit.ly/4p3XFq. It worked for me!
    Basically it is:
    1. Get install the needed packages, i.e: sudo apt-get install ibus ibus-pinyin
    2. After installing them, introduce a little code into two files:
    2.1.--> type on your konsole: kate /home/$(whoami)/.bashrc
       a--> add to the bottom of the opened text:
    export GTK_IM_MODULE=ibus
    export XMODIFIERS=@im=ibus
    export QT_IM_MODULE=ibus
       b-->save the changes on the text.
    2.2.--> type again on your konsole: kate /home/$(whoami)/.profile
      b--> repeat 2.1.a. and 2.1.b
    3. Go to main menu - system settings - advance - "autoarranque" (I don't know how it is called in English, "restarting" maybe?) and then "add a programme". Type: ibus-daemon -d, press OK and then rebooth.
    It shall be working by then.
    Last edited by mxd (2013-07-06 01:42:27)

  • Selecting alternate rows.

    hi,
    how can i select alternate rows.
    thankx in advance,
    aparna
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by aparna sairam ([email protected]):
    hi,
    how can i select alternate rows.
    thankx in advance,
    aparna<HR></BLOCKQUOTE>
    i think this query u r asked
    select * from emp where rowid in (select decode(mod(rownum, 2),1,rowid) from emp)
    Please check and inform me [email protected]
    by
    venkat

  • Running Multiple SQL in a Single Worksheet: Can I Selectively Run a Single SQL and Append Output?

    In any release of SD, if I have a single worksheet containing 10 sqls. Is it possible to place the cursor on any of the sql and run only that sql, yet, append its output to existing output window. I can then select another sql and execute it and keep appending output. In other words, do not clear existing output or start a new output tab.
    As it exists today (in any release), I can either 'run script' which does append, but it executes all the sql (non-selective). Alternately, I can 'run statement' to selectively run a single sql, but it will clear the output window (or if pinned), start a new one. None of this is what I want.
    Thank you.

    Select the query you want to run. Execute it via F5. Then highlight the next query and repeat.
    The output will append to the Script Output panel.
    There's no way to get 2 queries to share a grid, unless you were to run them as a single query a la UNION.

  • How can i retrieve the output of procedure using a select statement ?

    Hi every one.
    this mite be dumm ?
    how can i use the output of the a procedure containing multiple rows of data in a select statement ?

    This is not  a SQL Developer question. You should ask it in the SQL and PL/SQL forum.
    The short answer is you can't.  Sounds is if you are trying to use MSSQL techniques in oracle. Learn oracle techniques

  • Can't select "Built-in Line Output" in Audio/MIDI prefs

    I have audio on my MacPro going out "Built-in Line Output" via the mini-jack at the back to a receiver. Everything works fine.
    When I open GarageBand's preferences to set up Audio Output it has defaulted to "Built-in Output" (the little speaker and jack in the front) and is grayed out, I can't select "Built-in Line Output" to send GarageBand's audio out the mini-jack at the back.
    Anyone know what's going on here?

    HangTime, Thanks for the replies and link.
    The problem has solved itself, which is good, but I have no idea why or how, which is mildly off putting.
    I went into system prefs and set the Sound output to "Built-in Output," thinking maybe that would "free up" Built-in Line Output for GB, which doesn't make sense, but whatever, none of it made sense. That had no effect in GB, same situation. So, I switched the system prefs back to "Built-in Line Output" and left things for a bit.
    Then the next time I went into GB everything was fine. The pull down menus were available and I could select "Built-in Line Output." Weird. [insert head scratch here]

  • Can't select paper type or output quality when printing from new imac....

    Not sure if I'm in the right place to post this question....
    When I try to print (from ANY app; Photoshop, InDesign, etc.) to my hp business jet inkjet printer, I get a print menu, but no where on the print menu (or any pulldown tabs) do I have an opportunity to select paper type or output quality. I am unable to print photos, for example.
    The printer worked fine with the old PC; there is no driver to d/l for mac.
    Only from iPhoto can I select paper type (from a limited number of choices), but not from any other app on my imac. I mostly use InDesign and print flyers and brochures, many with photos, and can't select anything other than plain paper. Do I need a new printer? Genius bar 'help' said they had no idea why it wasn't working....
    HELP!!!
    Thanks!

    Hi Duane,
    Yes, I opened the Printer Driver package, and then pulled up my test InDesign file and selected File>Print, and here's the screen i get: (hope this works, I'm trying Skitch for the first time)...
    [img]http://img.skitch.com/20100219-8ywf49rxkh7heg86n25gefbydc.preview.jpg[/img]
    Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
    when I click on "Setup" in the print menu box, I get this screen:
    [img]http://img.skitch.com/20100219-pgqjnjt1anrx2xic3pih9def3y.preview.jpg[/img]
    Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
    I've clicked on each topic on the left on the Print menu, and still there is no where to select paper type or output resolution.
    The same thing happens when I print from Photoshop.
    Thanks.

  • At Selection-screen output event

    Hi
    can any one give me some examples for at selection-screen output event
    with regards
    nagaraj
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Nov 8, 2011 12:13 PM

    Thanks Benedict
    Creating Module %_S_KOSTL and write our own logic to bring the parameter id value of Cost center from User profiles is NOT possible in program RM06BF00,  screen 1000.
    We can do that in Copied program of RM06BF00 ..which is the very last option.
    I wanted to do that with User-exits or BADI or Enhancement spot etc...which i Couldn't do it so far...
    The alternate might be Zprog and Ztcode or an SNOTE..
    if you ALL think its NOT possible with User-exits or BADI or Enhancement spot or SNOTE etc..Then i will close this Thread...
    Please let me know ASAP...
    Thanks
    Govi

  • AT SELECTION-SCREEN OUTPUT event of standard tcode

    Hi
    I need User-exit or BADI or Enhancment spot in AT SELECTION-SCREEN OUTPUT event of ME55.
    I need to populate the default cost center into the cost center field from user parameters with pid 'KOS' when i execute the ME55.
    I maintained the PID in user parameters but the value is not getting populated in ME55.
    Please let me know
    Govi

    Thanks Benedict
    Creating Module %_S_KOSTL and write our own logic to bring the parameter id value of Cost center from User profiles is NOT possible in program RM06BF00,  screen 1000.
    We can do that in Copied program of RM06BF00 ..which is the very last option.
    I wanted to do that with User-exits or BADI or Enhancement spot etc...which i Couldn't do it so far...
    The alternate might be Zprog and Ztcode or an SNOTE..
    if you ALL think its NOT possible with User-exits or BADI or Enhancement spot or SNOTE etc..Then i will close this Thread...
    Please let me know ASAP...
    Thanks
    Govi

  • Help Needed in At selection screen output

    Hi Experts,
    I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
    Thanks in advance for all your help.

    example from a checkbox in one of my progs..but you can do same approach with radio butts
    parameters p_test as checkbox default abap_on user-command test.
    at selection-screen.
        if sy-ucomm = 'TEST'.
          perform birth_mnth_chck.
        endif.

  • Can not change sound output. Help Please

    Well, i've been digging all the forums lately in web. my problem is, i can't change my 'system' sound output to my sound card which is Native Instruments Audio8 Dj.
    Let me explain my problem decently. I do the usual procedure, system preferences > sound > n then select the output. but nothing happens. it is always set on internal speakers or headphone or whatever plugged in to the *Built-in Output*. I try switching from audio-midi setup n that doesn't work as well. The system perfectly recognizes the sound card, i can get output from sound card with applications which have their own output settings. But i cant change the system output. I have the latest version of soundflower loaded(this might be causing the problem who knows), i used many soundcards before(or maybe even ex-drivers?) n they used to work until i updated to snow leopard. I also tried trashing the files in macintosh hd > library > preferences > audio >>
    and those files *did not regenerate* after restart(like 10 times), so i had to copy them from my imac.(hehe). i tried resetting pram or nvram.(didn't do any good too)And also i tried trashing soundpref.plist which didn't do me any good neither. Now i need that sound card to give me my system output. I don't need drivers of any other ex-sound cards or whatever. My drivers are up to date. And im pretty sure this ain't an hardware fail.
    So, any ideas? Thx.

    I am having the exact same problem. I have spoken with Apple Care and they are having my case reviewed by "Engineers," apparently. Its very frustrating as I cannot listen to iTunes or any of my video games through my really nice monitor speakers. FYI, I had this problem without installing Sound Flower, since then I have installed it in the hopes that having something different to select it might work but no changes. If I hear any good news from Apple I will be back to let you know. This seems to be a very rare problem as I have only found one other post about this issue.

  • Can not select TV speakers when connected via HDMI

    I have a MBP fully updated connected to a Sony TV vis HDMI/miniport.  Up until today this configuration was working fine.  Suddenly, I can no longer select the HDMI speakers in my audio preferences.  They are recognized and appear on the list but when I select them it has no effect.  Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it. 
    I have restarted with no success in changing this behaviour.  If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted.  I can manually select the TV speakers but the setting has no effect.
    However, I *am* getting audio output through the TV but can not control volume from the mac or any app.  I slide the volume slider on the menu bar and the audio output does not change.  The sound is also playing from the laptop speakers which is highly annoying.

    and now there is no audio through the TV at all.  TV works fine with other inputs such as PS3.  Any help?

  • AT SELECTION-SCREEN OUTPUT.

    Hi All,
    I have a selection screen which i need to influence before it is shown in the screen after the transaction is executed.
    I want the user to influence one of the fields in selection screen by an user exit.So if in the user exit the parameter is set by the user ,then only that particular field should be enabled or else it should be disabled.
    I know i can use AT SELECTION-SCREEN OUTPUT.
    but i am not sure that i can influence it with an user exit.
    Could anybody let me know the logic or code to write this.
    It would be very much help full.
    Regards,
    Priya.

    Hi Priya,
    you can make properly for loop at screen. with modify screen..
    it applied for enabled or disabled screen proceed.
    thx,
    s.suresh

  • At selection screen output dialog

    how i can make
    i have customer i want when i click enter to get the description.
    the program is dialog , i get always err,and when i put in PBO or PAI.

    Hi Little ,
      What i understand is that you are working on a report and not a module pool.
    If it is a report then you will first have to modify the selection screen , go to SE51 , put in the program name and the screen number ( which is generally 1000) , on the screen add a new I/O box which is for Output only let it be KNA1-NAME1 .
    Now you need to write the code in the event AT SELECTION-SCREEN OUTPUT .
    Here is the sample code for the same
    tables : kna1.
    parameter : kunnr type kna1-kunnr.
    at selection-screen output.
    if not kunnr is initial.
      select single name1 into kna1-name1
        from kna1
        where kunnr =  kunnr.
    endif.
    Hope this helps.
    Regards
    Arun

Maybe you are looking for