Can't select an image to use for a signature in Reader XI

Using Adobe Reader XI, I can't select an image to use as a signature. I have an image saved as a JPEG, but using an image is never an option. I only see the option to use a certificate.
Help!

A signature in a PDF is a digital signature. It consists of metadate, and not an image or physical signature.

Similar Messages

Swapping Macs, can't change the image file used for TM to a Time Capsule

Hello ~
I have ten Macs connected to one TimeCapsule (TC) and nine of them work flawlessly performing a TimeMachine (TM) backup. On the one that doesn't work properly, it is a PBP with Leopard 10.5.8, and latest updates. The other Macs are mixed 10.5.x and 10.6.x.
I had a user on the PBP that I had been backing up in the past. I erased the HD and reinstalled the OS, and then created a new account. I wanted to start backing up the new account and have the name of the backup be the new name I put under Sharing Preference (I assume that's where TM gets the name of the backup).
Well, apparently not, the name of the backup is still the old user name from Sharing, and on the old account before the computer was erased.
I have repaired permissions, I have thrown out the TM prefs in Mac HD\Library\Preferences\, I have restarted the computer. So far I can not get the name to change on the sparse image that it copies to, even though TM says the backup completed without error.
So, as it appears the backup is using the same old image file that this Mac had been using, the backup are separate when you go into TimeMachine, they do not seem to access each other's data, and inspecting the contents of the image, the date of the backup file is there for the new user in the old image file.
I really would just like the PBP to stop using the old image file and create it's own image.
Any ideas welcome!
Thanks all
Chaz

I'm slightly confused. What is a PBP or did you mean a MacBook Pro (MBP)? And, what do you mean by a backup "image?" TM does not make images. Are you actually referring to the backup folder for this machine?
If I understand correctly what you need to do is delete the old backup for this machine so TM can start from scratch with a new backup. To do that open the TM application and select your backup, then from the Finder's tool icon in the toolbar select "Delete." which should delete the entire backup.
Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.

Can't select placeholder image in template

Hello there,
perhaps I'm too stupid and the solution is such easy. But today I wanted to use the template "You're invisited" to style an invitation for a friends birthday party. In iWork '06, I could select the images on the left side on page 1 and 2 to insert an own image. Now, in iWork '08 it seems to be a text box including image and text - I can't select the image only. Consulting the manual did not solve this, so I'm looking here for help. Thanks a lot in advance
Klaus

I can't duplicate the problem you're having. When I open that "festive invitation" template in Pages 3 I can select either the picture or the text box, they are not grouped or otherwise linked. The picture is a "media" placeholder, same thing as image placeholder in Pages 1 & 2. This one does have a mask applied, but none of that prevented me from inserting a picture of my own choosing.

Help! Can't select an image

I am no Photoshop expert but I have been using CS6 for a long time. Suddenly I can't select my image. I always clicked on the icon in the layers palette and it was "marching ants". Not working. I figured out a backdoor way yesterday but if someone can tell me how to reset PS (which I've done twice before but I forget how now) I would appreciate it. Called support but they said I had to wait until Monday and I work.

A signature in a PDF is a digital signature. It consists of metadate, and not an image or physical signature.

I need to cut and select an image to use on another carrier!

I need to cut and select an image to use on another carrier !
I can not remove the background in my selection
I need your help! here is my email [email protected]

This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

Can a write-optimized DSO be used for Delta upload

Hi,
can any one please answer following..
1. can a write optimized DSO be used for Delta upload?
2. Does industry based content is available in BI Content ?
Thanks&Regards
Satya

Hi,
Write-Optimized DataStore does not support the image based delta, it supports request level delta, and you will get brand new delta request for each data load.
Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Write-Optimized Data Store supports request level delta. In order to capture before and after image delta, you must have to post latest request into further targets like Standard DataStore or Infocubes.

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Duplicate post: http://forums.adobe.com/thread/1338701?tstart=0

HT204053 can two different apple ids be used for the same imatch

can two different apple ids be used for the same imatch homesharing for music

Welcome to the Apple Community.
No.

Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

Hi mho,
1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
2. see this:-
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
3.If Matlab support TCP/IP, that could be an option.
see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
If both programs running on different systems:-
Most simple and slow - Create two VI's with shared variable on both machines, and use a matlab script to
share data. (this makes matlab some kind of "slave").
More advanced but still relatively slow (Create two VI's with shared variable, on the Matlab machine build the .NET
dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
Create TCP/IP connection between two comps.
There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
I think this link is also helpful for you:-
Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
Anyway All the best.Try....do it.
Thanks as kudos only

Can Oracle Access Manager (OAM) be used for configuring data-level access?

Hi,
Can OAM 10gR3 or 11g be used for configuring data-level access in PS 9.10 and OBI 11g.
This would mean that data-level configuration are stored centrally within OAM database and PS 9.10 pulls these settings for its appropriate Row and ChartField security and OBI 11g queries OAM database tables to populate the initialization blocks during login.
If you have configured this successfuly, please feel free to provide highlevel details/steps about the configuration and any complexities that can pre present.
Thanks.

I recently worked on an interesting implementation that utilized OAM configured against OID in which OAM was configured to control authentication/authorization and then all applications that were serviced by OAM utilized the users login to pass to the database at which point the Oracle database utilized VPD, which was configured against the same OID instance, to leverage user attributes/groups in order to configure fine-grained access control to data within the database. Not sure if this would work for you unless your requirements are similar but it worked very well for this particular implementation as it allowed them to have SSO for their own apps and for BI Publisher which then could pass allong the userid to be leveraged by the database to do fine grained access control.
Edited by: oblix_fan on Jun 23, 2011 8:10 AM

Can ipad air wifi cellular be used for making mobile calls?

Can ipaid air (Wifi+cellular) be used for mobile calling ?

Not 'normal' phone calls as you would with a mobile phone - you can do calls such as with FaceTime or the Skype For iPad app, and you may find other apps in your country's app store that allow you to make calls

Can an iphone 4 sim be used for iphone 5

can an iphone 4 sim be used for iphone 5

And it's not possible to cut down an existing SIM or micro-SIM. At least I've never seen a reliable report of anyone successfully doing so. You'll need to get a nano-SIM from your carrier for the iPhone 5.
Regards.

How can I select which photo is used on the cover of an i-Photo book?

I have created a photobook, and can do most things I need, but the photo selected by Autoflow for the cover is not the one I want. Can anyone tell me how to change it?

You can drag any of your photos to the coverpage.
Click onto the title page to select it and open the Photos Browser window, then drag the photo you want to use onto the title page.

Can't select an image to use for a signature in Reader XI

Similar Messages

Maybe you are looking for