Can't select buttons to change text

I set up chapters in I-Movie and exported the project to I-DVD.
When I go to a chapter screen it will highlight the lower right button and allow me to change its text, button shape etc., but I cannot access the other buttons to change text.
I tried changing the mouse click speed as instructed, no luck.
I tried changing the the chapter titles in I-Movie but that only posted the top text line.
Any ideas as to why I can't select these chapter buttons to change text?

This is what I had to do to change text on buttons.
I could only change the text on the lower right chapter button.
Then moved the button up, left, whichever, to cause a new button to fall into the "prized" lower right spot. I could then change the text on that button. So on and so forth.
The major problem is that the buttons, now with the correct text, are all out of order. It now became some kind of torture to find the right combo of moves to get the buttons back in the same order. I'd advise saving backup if you decide it's not worth the work.
For transitions I used the "select all button" option in "Edit" to avoid the torture test.
Once this project is done I'm reloading IDVD but maybe this will help somebody in the meantime.
Good luck

Similar Messages

All of a sudden my podcasts are 'frozen' . . . I can't select them and the text is gray, not black.

I'm traveling and count on my iPhone 4S for entertainment. But all of a sudden my podcasts are 'frozen' . . . I can't select them and the text associated with them is gray, not the usual black. OS 6.1.3
Any ideas? I suspect a setting somewhere, but can't find it or figure it out.
The podcasts on my laptop respond and play just fine.
Thanks for any help.

On the padcast playing screen on the right side below the scrubber bar is the playback speed icon. It can say 1/2X, 1X or 2X, those are the playback speeds. Tap the icon to change speeds.

Is it possible we can to set button cornor link text?

is it possible we can to set button cornor link text?

@welcomecan,
Your question is not clear to me ...Will you please elaborate..??
Thanks,
Bhasker

Can't Select/Edit File Name Text - they go blank

Sometimes when I try to select a file name to edit it, the name disappears when I first click it. This often happens in list view. If I switch to icon view, most of the times, but not always, I can then select the file name text. Sometimes if I switch back to list view, then I can select the file name text as expected, but again not always.
It is intermittent so I can't give any consistent info on how or when it happens.
Thanks,
Steven

Try this. Select the file and hit the enter key. Does that highlight the name without deleting it? If so, adjust your mouse click settings and see if that fixes the problem. If not, create a new admin account, log into, and see if the problem's gone. Report back.

In Acrobat XI, how can I select and move multiple text/image blocks simultaneously on the same page?

I work with student-generated PDFs that require all content to be within a specific margin range. Occasionally tables and figures are indented or otherwise spaced incorrectly so that the content violates the margin requirements. In Acrobat X, I could use the select tool to draw a select box around all of the text and lines within a table, for example, and just slide the entire table over a bit to meet the requirements without sending the PDF back to the author for a correction. This didn't always work, but often enough that I was able to use it on a daily basis.
Is there a way to select multiple (but not ALL) text blocks and image pieces on a page, so they may be moved simultaneously? If I have to select every text block and line (or every point and line within a graph) and move them each individually, this is going to be a nightmare.
I have Acrobat XI for both Mac and Windows, but tend to use the Windows version more often.

Hey, I'm using Acrobat XI and I can't multi select like I use too do with shift as always. Now I get a green note every time I want to multi select with shift + click as always. I also use Pitstop and I get the same green notes.
Can someone help me ?

Select each page's text frame in one shot and resize them

Hello, I want to make a 400 page text book. How can I select each page's text frame in one shot and change their size simultaneusly? (each text frame has same size per page)

Make a backup copy of the file incase something goes wrong, then:
Make sure the frames snap to the margins on all sides -- change the margins on the applied master page to achieve this, if necessary.
Enable Layout Adjustment (Layout > Layout Adjustment...)
On the master page change the margins to be the size you want the new text frame dimensions to be.
If, for some strange reason, you don't want to use these margin settings in the layout, turn OFF layout adjustment and reset them on the master page again to what you want.

Can't select "Displays" in System Preferences

In System Prefences, I can't select "Displays" to change the settings. How do I fix this?

you can try removing the audio settings, and see if you get get into settings.
to do so, open the terminal (applications, utilities)
'sudo mv /Library/Preferences/Audio/com.apple.audio.SystemSettings.plist /Library/Preferences/Audio/com.apple.audio.SystemSettings.plist.old'
'sudo mv /Library/Preferences/Audio/com.apple.audio.DeviceSettings.plist /Library/Preferences/Audio/com.apple.audio.DeviceSettings.plist.old'

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

How can I change text for paginate button?

I use Table (not DataTable) in the web application (NetBeans IDE 6.0.1). There are so called pagination controls buttons in the table. I?d like to change text in the buttons. How can I do it? For example ?Go? button text I like to change to another language. How can I change the text of ?Go? button via the language file. I like to also change the tooltips text of table via language file.

You need a NetBeans forum. This one's for Java.
db

Change text for radio button

Hi all,
Can we change text of radio button in selection screen after pressing push button?
On screen, I will have push button for user to select one of two conditions, after selecting, I want radio button text be changed, for example : text > 'upload' will be changed to become 'upload sales'.
can we?
thanks
Alia

Hi alia,
1. Very simple.
2. The Important thing is
    NAME of the RADIO BUTTON.
eg. name is XYZ.
     then we can access it in program like this :
    %_XYZ_%_app_%-text = 'Hello Sir'.
(Please note the FORMAT - Its important)
3. try this code (just copy paste in new program)
IT WILL CHANGE TEXT OF RADIO BUTTONS
WHEN PUSHBUTTON IS CLICKED.
REPORT abc.
PARAMETERS : abc RADIOBUTTON GROUP g1,
             xyz RADIOBUTTON GROUP g1.
SELECTION-SCREEN : PUSHBUTTON /15(25) pb USER-COMMAND pp .
ABC, XYZ
AT SELECTION-SCREEN .
IF sy-ucomm = 'PP'.
    %_abc_%_app_%-text = 'Hello Sir'.
    %_xyz_%_app_%-text = 'How are u ?'.
ENDIF.
regards,
amit m.

Can't edit button text - 6.0.2

iDVD 6.0.2
I'm unable to edit chapter button text - I can't select individual buttons, therefore can't highlight the text to change it. Clicking on a button selects the main title for that screen, not the button. "Select All Buttons" will allow me to change font/size for all the buttons on that menu, but not edit text. I'm using the "Fun" theme. Any help would be appreciated.
Phil

Could this be the problem?:
http://discussions.apple.com/thread.jspa?threadID=322543&tstart=0
iLife '06 System Requirements
• Macintosh computer with a PowerPC G4, PowerPC G5, or Intel Core processor; 733MHz or faster for iDVD
• 256MB of RAM, 512MB recommended
• Mac OS X v10.3.9 or v10.4.3 or later; v10.4.4 recommended
• iTunes 6.0.2 and QuickTime 7.0.4 (included)
• DVD drive for installation
• 10GB of available disk space
• High-definition video requires 1GHz G4 or faster and 512MB of RAM.
• Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner.
• iPhoto print services are available in the U.S., Canada, Japan, and select European countries; requires Internet access; fees and terms apply.
• .Mac account required for iPhoto Photocast publishing and recommended for iWeb. The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• iWeb requires Internet and webserver access (.Mac recommended). The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• Mac OS X v10.4.4 required for iMovie HD themes, iDVD themes, iPhoto Photocast publishing, and iChat recording in GarageBand. iChat video conferencing requires broadband Internet connection; fees may apply.

Can't change text once I've finalized it!

I've been using Photoshop for years, so I know all the basics. And I've never run into this before. I created a document with text boxes and images. Everything was fine to that point. But when I went back to re-word the text boxes and change text color, I could not do it. I tried everything: be sure that layer is selected, be sure I have the type tool enabled, and click somewhere in the existing text.
Nothing doing. No matter what I did, it insisted on starting a new text layer. I could not access the text itself to change it.
I could transform it or move it but it will not let me change the text itself or the text color.
I'm using the PS cloud version and running Windows 7.
I ran into this a few weeks ago, and rebooting my computer solved the problem -- or so I thought. Apparently it didn't solve it permanently.
Help, please! This was due yesterday and my client is understandably not amused.
Thanks.

Now I can change text in any text box except the one titled "spinetext", which is highlighted in the layers panel. Obviously I'm doing something wrong, but I've designed a lot of these covers, and never had trouble changing the spine text before.
I finally had to recreate that layer in a new document and import it into this one -- but the text remains unchangeable in this layer.
(For what it's worth, "Layer 1" is the template, which I turn off when I have inserted all the elements, so it has nothing to do with this layer.)
Thanks for your help!

How to change "Select a content category " text

Hi folks,
I really appreciate the support community, as I did deeper and deeper into the produce I've seen the same handful of names pop up across the board! Thanks for all your help!
I was wondering how to change the "Select a content category>>" text that displays in a traditional skin next to your content categories upon generation. Specifically this:
Is there a way to edit the text? Mine are focused on government levels and I'd like to make it easier for users.
Thanks! Happy New Year!

Hi there
I believe you do it as follows:
Click File > Project Settings.
Ensure the General tab has focus.
Click the Advanced... button.
Click the LNG File tab.
Scroll the list to the [WebHelp] section.
Locate the item that reads: ContentCategoryList=Select a content category.
Click on it to select it.
Click the Edit button.
Change the text following the equals sign it to what you want it to read.
ContentCategoryList=Change this text
Press Enter to accept the change.
Click OK to dismiss the dialogs.
Generate and test!
Hope this helps... Rick

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

I used to have a +.- displayed in upper left corner to click and change text size. My sister used my computer and now I can no longer find this feature.

I used to have a +.- displayed in upper left corner to click and change text size. My sister used my computer and now I can no longer find this feature

Do you still have all toolbars visible (View > Toolbars)?
Did you use an extension or the standard zoom buttons that you can find in the toolbar palette in the View > Toolbars > Customize window ?
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Can't select buttons to change text

Similar Messages

Maybe you are looking for