Can't select hyperlink box in iWeb !!!

I understand how to make a hyperlink in iWeb. I have read the directions a million times. When I have the Inspector open I am NOT able to check the box or enter a URL. I CAN check the "make all hyperlinks inactive" box...but I don't need that.
Is there a reason that the "enable as a hyperlink" box is disabled?
Using the iWeb that came on my MacBook Pro last March....so it's not the 08 version. Whatever came right before.

I did... actually, the problem was solved by another post on in the forums. It said:
go to the top, main image on the page (often a template image that the user may have changed by dragging and dropping their own pic into the frame) and cut it from the page (apple+c) and then reintroduce it (apple+v). Go and reselect the intended hyperlink object (text etc) and lo and behold the previously grayed out menus spring to life!!
A very odd glitch, but thankfully an easy one to work around when you know how.
S.

Similar Messages

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry

Can't select text boxes with Type Tool to write in on pages, only on Master Page

I'm unable to use the Type Tool to select the tax boxes on a document page in Indesign CC. I can select it on the Master Page. I can write on the Master Page. If I apply the Master Page afterwards, the written text from the Master Page appear on the document page, just as it should. But whenever I try to select a column on a document page, all the Type Tool does is draw a new text box (which I can select and write in). What's up with that? I applied the Master multiple times. If I can write on a the Master Page, why not on the document page?

Individual master frames can be overridden on a document page by holding down Cmd + Shift (Mac) or Ctrl + Shift (Windows) and clicking on them with the Selection tool.
Empty master text frames are generally more useful for placing external text files and having them flow from page to page than for typing, and they need not be overridden to do that -- just move the loaded cursor inside the frame.

Can't select objects in my layout

Using IDDCS2 on my iMac, I created a simple layout - saved in IDD and also saved as PDF. When I opened up the idd file again, I lost all 'boxes' so I can't select a box and I can't highlight or edit text. I've basically lost all functionality in the layout. It's become one immovable object.
Any idea what I have accidentally done? I didn't try to lock or anchor or flatten or any other step.

Sounds like created the layout on a master page.
Bob

Photo Caption text can't be hyperlinked

I posted earlier about this problem and yesterday I spoke, at length, to Apple Tech. Here is their answer:
When you are building your website with iWeb, and you chose the photo page to hold photos the photo captions (the text under the photos) can not be turned into a hyperlink that works when you are viewing the photo as a full screen single image. Although you can build the hyperlink while using iWeb, and that hyperlink will work in the testing phase, once published, that link will no longer work.
That hyperlink you made in the photo caption text will only work as a hyperlink if you are viewing your photo page in the "album view" with a page of thumbnail images. If the text you made into a hyperlink is visible while viewing that page in a photo album view, that text WILL hyperlink. But if you click on that thumbnail to enlarge, the hyperlinked text will no longer work as a hyperlink.
Fixing this bug entails digging into the html code of that photo page.
I sent Apple Feedback a post asking them to fix this bug.
Panther

Have you tried Cmd+X and then Cmd+F on the text object?
(Read Ctrl instead of Cmd if you’re on Windows.)

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

How can I select and enlarge the entire doc,ge on a page, reducing the surrounding boarder. I can move the difference text boxes about independently of each other but the outer most boarders of the main template block appear to be fixed.

How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder? I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed. I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.

Inspector > Document > Document Margins
The word is border. Boarders are the Harry Potters of this world.
Peter

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am doing a book. Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

No
All photos frames must contain photos or you can not order the book
LN

Can we make the SELECTION CRITERIA BOX act as a Menu / Submenu system?

Dear All,
I have written several queries.
For user convenience, I wish to combine all related queries in a single Query and use the Selection Criteria box as a Menu System to select which Query script to run.
I can already do this by the use of variables.
But all variables are shown in the Selection Criteria Box, and users must fill in only the relevant boxes.
It's not a problem, but as the number of Queries grows, the Selection box becomes quite long and distracting.
I wonder if it is possible to create a sub-menu?
Example
Let's say: When you run the Query, it gives this Selection Box:
Query - Selection Criteria
Choose a Report                                  [                     ]
                                                There are 2 choices:
                                                       (a) AP Aging by Document Date
                                                       (b) AP Aging by Posting Date
[OK]                [Cancel]
When you choose AP Aging by Doc Date, this Selection Box should pop up:
Query - Selection Criteria
Document Date                                  [                     ]
[OK]                [Cancel]
And when you choose AP Aging by Posting Date, this Selection Box should pop up:
Query - Selection Criteria
Posting Date                                  [                     ]
[OK]                [Cancel]
Please let me know if this kind of menu / sub-menu system is possible using SQL only?
I tried (see code below), but all variables appear on the initial screen (not what I expect) - like this:
Query - Selection Criteria
Choose a Report                             [                     ]
Document Date                               [                     ]
Posting Date                                [                     ]
[OK]                [Cancel]
Thanks
Leon Lai
Here's a test code: (not exactly for the illustration above)
declare @apaging1 varchar(max)
set @apaging1 =
/*select T6.U_apaging1 from [dbo].[@APAGING] T6 where T6.U_apaging1*/ '[%0]'
/* @apaging1 : [0 = Summary] [Detailed] */
If @apaging1 = ' ' set @apaging1 = 'Sum'
If @apaging1 = 'Sum'
GOTO Screen1
If @apaging1 = 'Det'
GOTO Screen2
Screen1:
begin
declare @aptxn nvarchar (30)
set @aptxn =
/*select T9.U_aptxn from [dbo].[@APTRXNS] T9 where T9.U_aptxn*/ '[%9]'
/*@aptxn: [0 = PU] [PC] [Both]*/
If @aptxn = ' ' set @aptxn = 'PU'
end
Screen2:
begin
declare @taxdt1 date
set @taxdt1=
/*select T1.[TaxDate] from [dbo].[OPCH] T1 where T1.[TaxDate]*/              '[%5]'
end

Dear István Korös
Thanks a lot.
Sad
At least, your answer will save me a lot of time searching for the unattainable.
Best Regards
Leon Lai

Can't select when I click in a box of type – is it a bug?

When I click in a box for the first time I can't select the type – can you?
click click bloody click.
Nothing happens.
I have to click again and highlight the text.
Inevitably– it's driving me around the bend.

I am not the brightest person sometimes.
I put the mouse in the text and click.
Then I click and I click and I click and I click ( I can send you a film) and nothing happens.
Do I need to buy a different type of computer?
I have only been using indesign for 10 years.
And this happned when I upgraded to CC.
Sorry for being a twit.

Can't select text or expand text box

Hi, everyone.
I have a Page Layout document that exhibiting some odd behavior under Pages 3.0.2.
Everything is ungrouped and unlocked. "Make master objects selectable" is on, although I don't think I made any of the objects master objects.
I can't select a text box using the mouse. The only way to get at the text is to perform a find. When the text is selected via the find I then have a cursor and can manipulate the text.
Also, the plus sign handle isn't responding to the mouse, so I can't expand the box. Very frustrating.
This seems very much like a bug, yes?
-André

Hi, Jerrold.
I thought of that, too, but choosing Select All selects every object except the one giving me the trouble. Also, there seems to be no evidence of another object over laying.
Ok, I just tried something slightly different that did the trick.
When the cursor is on the background, choosing Select All does nothing (yep, nothing, even though I can type). If I purposefully select an object, THEN choose Select All, all the objects get selected, except for the "problem" one.
But I noticed a menu item called "Make Background Objects Selectable." Choosing that gave the "problem" object handles and I am now able to edit it.
It seems that Select All wasn't doing what I expected, and that was the broken link in the chain.
Thank you!!
(And a public thank you to Dennis, too. Who correctly diagnosed the problem and sent back a working file. Awesome community.)

How can we use list box on selection screen

hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
thanks in advance
raju

Use the VRM_SET_VALUES function module.
DATA: list              TYPE vrm_values,
      value             LIKE LINE OF list.
           AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
name = 'P_OBJECT'.
CLEAR list.
REFRESH list.
CLEAR value.
value-key = '1'.
value-text = 'Development Class'.
APPEND value TO list.
CLEAR value.
value-key = '2'.
value-text = 'Program'.
APPEND value TO list.
CLEAR value.
value-key = '3'.
value-text = 'Function Module'.
APPEND value TO list.
CLEAR value.
value-key = '4'.
value-text = 'Database Table'.
APPEND value TO list.
CLEAR value.
value-key = '5'.
value-text = 'Structure'.
APPEND value TO list.
CLEAR value.
value-key = '6'.
value-text = 'View'.
APPEND value TO list.
CLEAR value.
value-key = '7'.
value-text = 'Data Element'.
APPEND value TO list.
CLEAR value.
value-key = '8'.
value-text = 'Table Type'.
APPEND value TO list.
CLEAR value.
value-key = '9'.
value-text = 'Class / Interface'.
APPEND value TO list.
CLEAR value.
value-key = '10'.
value-text = 'Type Group'.
APPEND value TO list.
CLEAR value.
value-key = '11'.
value-text = 'Domain'.
APPEND value TO list.
CLEAR value.
value-key = '12'.
value-text = 'Search Help'.
APPEND value TO list.
CLEAR value.
value-key = '13'.
value-text = 'Lock Object'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = name
      values          = list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How can i call the certificate selection dialog box from source code?

How can i call the certificate selection dialog box from source code?
NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
Thank You in advance

I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609
The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
Thank you,
Hecuba
Mfg. Test Engineer
Certified LabVIEW Associate Developer

Can't select hyperlink box in iWeb !!!

Similar Messages

Maybe you are looking for