Can't select 'motion source' in AE CC while attempting to do motion tracking.

Hey all,
I'm new to AE, and am trying to do some motion tracking following this tutorial: https://library.creativecow.net/articles/devis_andrew/AE-Basics-53-Motion-Tracking-1/video -tutorial I linked in a clip (GoPro 4k as .mp4) from PP, created a Null layer and opened up the tracking panel, but the selection for my video file "GOPRO###" and "Null 1" are grayed out. I double clicked on the GOPRO### files in the timeline, which I'm assuming opened it in a new comp. From here I was able to complete the tracking, but then I have no clue on how to link this new comp back into premiere.
If anyone can tell my why all my motion source choices are grayed out, I would appreciate it.
Also, how would I add a .PNG file as the object that is following the tracking? Do I just add the .PNG as a layer, and set it's parent to the Null 1 layer?
Thanks!

When you double-clicked on the layer in the comp, you opened a LAYER window. That's the only window where tracking can take place. Once you have a good track, you APPLY it to a layer in the comp.
If I were you, I'd go over that tutorial a couple-three more times. Andrew spells things out pretty clearly in his tutorials.

Similar Messages

I can see myself and hear the other person while attempting to connect to face time but cannot see them

New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

Hello Wollyt
Check out the article below for troubleshooting FaceTime issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I disable motion tracking in iOS8?

I noticed that my iPhone is tracking my steps in the background.
How can I turn this off? Surprisingly, I could not find any instructions on the Web on how one can turn this tracking off.
It is really frustrating.

Based on the fact, that there is no option to turn it off within the app. I've already looked.
This topic has been discussed already, you can use the search function at the top right and see the discussion.

HT204379 "source" locks at "loading" and no image-screensaver can be selected

The problem that I am experiencing (and many others like me as I have noticed in several fora) is that the "source" when selecting an image screensaver blocks at "loading" while nothing happens and no (folder or aperture library) source can be selected. The problem started basically since Apple blocked the possibility to use a folder with images in subfolders as source for a screensaver as used to work perfectly in Snowleopard. But while Mountain Lion only works with iPhoto or Aperture libraries it made the system susceptible to windows like errors.
When selecting a slideshow-screensaver, the source remains as "loading" where no options are given to select anything. It used to work until a few months ago, but I have no clue why it stopped or how I can get it to work again. When the slideshow screensaver is selected I get an error message telling me there was an error connecting to a netwerk server. No clue why it actually needs that server (which died some time ago). If i shutdown systempreferences while the slideshow is still selected, each time it tries to start the screensaver I get the same warning that there is a problem connecting to a (dead) airport extreme.
I have tried to reinstall Mountain Lion, rebuild a new Aperture image library, remove certain .plist files that may be connected to this as was suggested in several fora, nothing works. I cannot imagine that Apple forces me to abandon Mountain Lion and to go back to Snowleopard over a screensaver.
A hint to third party developers: please create a simple slideshow screensaver where you can select a folder including subfolders. It can't be that hard to create (although Apple fails completely).

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How can I select Apple TV in iRadio as a source?

How can I select Apple TV in iRadio as a source?

Not possible. The only way to stream content from outside iTunes is through mirroring, DVD's are blocked due to copyright. Best to connect a DVD player to your TV if that is your intended purpose.

Can't select anything in design mode

I am new on a large Flex project, and when I go into design mode on one of the mxml files, I can't select anything. The other views work fine. Is there a lock, or something? Below is what it looks like (black mark just hides brand info). Note that there is a red line near the bottom. It is actually selectable, but it doesn't do anything. If I go to Source mode and select a chunk of code, then back to design mode, it does show it as selected.
This in Flex Builder 3, thanks.

Have you tried using the outline view for selection?
Jason San Jose
Software Engineer, Flash Builder

How can I remove the " Source.vi" from long Express VI Names?

I am in the Moment working on the Development of an Express VI
library for test purposes.
How can I remove the " Source.vi" from long Express VI Names?
This happens when the Express VI is inserted in the blockdiagram
and listed in LabVIEW and TestStand Palettes.
By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
is not shown at the end of the Express VI names.
I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
Labview Version: 7.1 Base
TestStand: 3.1
It would be great to get the expert advice from the Forum for this issue!
Thanks a lot.
Andre

I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
I hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How can I select only a small part of the image to clone or edit etc?

I want to select part of the image to clone is, and just edit the selected part. I know i can do this on photoshop but how do i do it on Aperture?

You use the "Retouche" brush in Aperture and set it to "clone".
Option-Click on the location you want to clone from to select a source, and then brush over the location where you want to clone to. The cloned region will follow the shape of the brushed area. You do not lasso the shape to to copy and paste it like in Photoshop.
For example: Duplicating a penguin: The sourcepoint has been set to the beak of the second penguin, and then I brushed along the path where I want to penguin clone to appear.
If I brush the whole area eventually the penguin will be copied completely. You'll have to experiment a bit with the brush size and softnees to ensure that the cloned object will blend in.
Regards
Léonie

I want to remove volumes from 'Import' - 'Select a source' list

Hi all,
First, I'm using the new Lightroom v4.1 on a Windows 7 x64 system.
As the title to my question suggests, I'm trying (without success) to remove volumes from the list that's shown when a user clicks on the 'Import' button (lower left of screen) and 'Select a source' which, naturally, shows all the drives in my system.
There are five volumes; four internal and one external.
There are only two drives which contain photos that I'm interestered in importing/editing.
The other drives contain files that I have no interest in editing or organizing.
For example, several hundred (scanned and collected) very old family photos that I wish to keep pristine, with no editing of any kind. As for placing them in collections, I already have them in dated, carefully named folders.
So, as this is a shared computer, I want to remove the volumes (drives) so that the aforementioned photos can't be inadvertantly imported.
Can someone please point me in the right direction how to do this?
Thank you.
Yours,
Hugh

There is nothing within Lightroom that will cause it to ignore a specific drive permanently. You'd have to go above Lightroom to the system level to prevent Lightroom from seeing the drive. Not sure how to do that, but it's probably possible.

Advanced selection for source file

Hi,
Requirement: One source directory, multiple file names. File needs to be picked up from source directory and send to target directory with same name as source file name.
Source file name pattern sample: AP5_X_yyyyddmm, A35_X_yyyyddmm, AP5_Y_yyyyddmm, AP5_Y_yyyyddmm.
Target file name should be :AP5_X_yyyyddmm, A35_X_yyyyddmm, AP5_Y_yyyyddmm, AP5_Y_yyyyddmm
Can we define multiple place holders as :
Directory
File Name Mask
Exclusion Mask
\\Source
AP5_X*.txt, A35_X.txt, AP5_Y*.txt, AP5_Y*.txt
When I tried for single place holder, the scenario was working but when I tried adding multiple place holders it was not working.
How can we achieve the above scenario?
Thanks,
Vertika

Hi Amit,
Thanks for reply.
Yes you understood it right.
I am able to achieve this now. The only change that I did is instead of giving all the placeholders in same line I have given it in different lines and this is working now.
Sender Adapter Configuration: Checked Advanced selection for source file and used Adapter specific message attributes to keep same file name as source file name.
File Name Mask
File Name Mask
Exclusion Mask
\\Source
AP5_X*.txt
\\Source
A35_X*.txt
\\Source
AP5_Y*.txt
\\Source
A35_Y*.txt
I am closing this thread now.
Thanks,
Vertika

Can not select a PDF file in the file uploader window after clicking the Browse... button for a file type input element.

After upgrading to 5 (this worked in 4) I can not select a PDF file in the File Upload dialog that appears when I click the Browse button next to an HTML file type input element. The specific HTML element source code has the attribute: ACCEPT="image/*". I can select image files such as jpg, png, tiff, etc. But not PDF. This worked great in Furefox 4 and works in the latest version of Safari.
The HTML code for the form element is:
INPUT TYPE="file" NAME="file_1" ACCEPT="image/*" SIZE=35
The File Upload dialog lists all files with PDF extension as dimmed and not selectable in Firefox 5.
Can you help?

Hi Purush
Unfortunately we couldn't solve the problem. Our IT specialist checked it with SAP directly. SAP doesn't support the SAP KW solution anymore. Therefore we checked-in the document in ".doc"-Format.

File Adapter: Advanced selection for source file

Hi Experts,
I am doing file(Idoc format) to IDoc scenario. In my scenario I am getting files in three different formats (ex: abc.dat, xyz.dat, 123.edi). My communication channel (sender file adapter) should poll for every 30 mins, picks up the files and map them to Idoc without any mapping.
Need following clarifications:
1. Should I create 3 communication channels to pick up 3 different type files? Or should I use the Advanced selection for source file to pick up them with only one CC?
2. If there is no mapping how should I proceed in this case?
Regards,
Rams

>>1. Should I create 3 communication channels to pick up 3 different type files? Or should I use the Advanced selection for source file to pick up them with only one CC?
Not required.. if all the files are from the same directory then u can specify . in the file name parameter.. but make sure that only these 3 file types are places in the directory... if this is not the case you can use Advannced Selection... check my Wiki [Single Sender File CC For Multiple Directories|https://wiki.sdn.sap.com/wiki/display/XI/SingleSenderFileCCForMultipleDirectories]
>>2. If there is no mapping how should I proceed in this case?
Mappiing is required only if the source and the target structure are different.. if u send the file with the IDocc XML format mapping is not required...
~SaNv....

Advanced selection of source file

Hi All,
i am working on a scenario in which file needs to be picked up from 3 different directories.say A, B and c
I configured in CC by giving 3 different directories.... in "Advanced selection of source file" option i have given directory B and C there.
....i am using Adapter specific message attributes also for this CC..
Its is working fine, But my issue is : i want to take the back back up for every directory file, means archive...
How can i do that???
please guide me through this.....am i missing any thing?
Please guide me..
Thanks,
Anu-

Hi Anu,
select processing mode as Archive and mention the archive directory path if u want to add timestamp to the file check the checkbox Add Time Stamp.
regards,
Shekhar.

How to make the combobox column in grid can be selectable

Hi,
I have a grid in a form and use a SQL query as the data source. Now I want to make a column(a field in a SQL query) to be displayed as combobox and user can select it. I tried to use below code to make the column displayed like a combobox, it seems that the colunn becomes a dropdown box but i can't select it. Also I can't find a way to add valid value and description into this combobox like what I do on a combobox in a form.
oGrid.Columns.Item("Approved").Type = SAPbouiCOM.BoGridColumnType.gct_ComboBox;
SAPbouiCOM.GridColumn col = oGrid.Columns.Item("Approved");
then ???
Any suggestion?
Thanks!
Lan

Hi Lan
Try This For Matrix......
'For Adding Values
oColumn = oColumns.Add("Drink", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX)
        oColumn.TitleObject.Caption = "Drink"
        oColumn.Width = 100
        'Add Valid Values
        oColumn.ValidValues.Add("Cola", "")
        oColumn.ValidValues.Add("7up", "")
        oColumn.ValidValues.Add("Fanta", "")
        oColumn.ValidValues.Add("Orange Juice", "")
        oColumn.ValidValues.Add("Water", "")
        oColumn.ValidValues.Add("Lemonade", "")
        oColumn.ValidValues.Add("Ice Tea", "")
        oColumn.ValidValues.Add("Coffee", "")
'For selected Value
Dim ocombo As SAPbouiCOM.ComboBox
            Dim oform As SAPbouiCOM.Form
            Dim omat As SAPbouiCOM.Matrix
            oform = SBO_Application.Forms.Item("MOR1")
            omat = oform.Items.Item("mat").Specific
            ocombo = omat.Columns.Item("Drink").Cells.Item(1).Specific
            ocombo.Select("Fanta", SAPbouiCOM.BoSearchKey.psk_ByValue)
Thanks
Shafi

How can I select the existing worksheet while using OLE2 to open the template workboo

Source:
application:=ole2.create_obj('Excel.Application');
workbooks:=ole2.get_obj_property(application,'Workbooks');
args := ole2.create_arglist;
ole2.add_arg(args, 'c:\RptTemplate.xlt');
workbook:=ole2.invoke_obj(workbooks,'Open',args);
ole2.destroy_arglist(args);
worksheets:=ole2.get_obj_property(application,'Worksheets');
args := ole2.create_arglist;
ole2.add_arg(args, 'Sheet1');
worksheet :=ole2.invoke_obj(worksheets,'Select',args);
ole2.destroy_arglist(args);
Problem:
1. While executing the above code, error -305500 occurs after executing "worksheet := ole2.invoke_obj(worksheets','Select',args)". How can I select the sheet i wanted in the template ??
2. As I refer to the forms on-line document, it stated that the ole2 programmers documentation can provide all object types and methods that can be used with the OLE2. Does any link can provided to download the specified documentation ??

The error is probably that your Worksheets variable is actually empty. Looking at your code I think the problem is that you try and get the value of the worksheets collection from the application then you should try and get it from the Workbooks object.

Can't select 'motion source' in AE CC while attempting to do motion tracking.

Similar Messages

Maybe you are looking for