Can't Select Multiple speakers for AirTunes
I have had a problem for the past few days now where i can't select to use multiple speakers when using AirTunes.
This has never happened before, and was fine after the update to iTunes 7.
Is there something i need to change / select in my AirPort preferences to make multiple speakers enabled?
Do you have the latest Firmware of the AirPort Express V6.3?
There could be a problem with older versions of the firmware and the new iTunes 7. Then I would also update iTunes to the newest version 7.0.1.
Similar Messages
-
Can't select multiple speakers in iTunes 10.3.1
Since updating to iTunes 10.3.1, I can no longer select multiple speakers (Airport Express, AppleTV) to stream music. Even though the checkbox looks clickable, it does not stay clicked.
I have a 2x2.8 Ghz Quad-core Intel Xeon MacPro running 10.6.8.open system preferences
open network pane
select airport in the left list
click the advanced button
go to the TCP/IP tab
set the configure IPv6 field to OFF.
click OK
click apply
now try again to connect to your remote speakers.
if this doesn't help, you may be suffering from wireless interference.
download iStumbler and note the channels other networks in the vicinity are broadcasting on, then change the channel your network is using as far away as possible from those. -
HT4325 Can you do multiple speakers for ipod touch 4 gen?
Can you do multiple speakers from ipod touch 4 gen ?
You are not addressing Apple here. We are all just users like yourself. Based on previous updates, I would not expect anymore update for the 4G.
-
Can anyone repro this; it's somewhat situational depending on how you organize your projects:
In the project selection user interface, go to export (5th icon from upper right) > choose a desired destination (like Save to Gallery or Camera Roll). Choose a project.
If you have projects residing in multiple folders, try and navigate to another folder by using the "back arrow" icon in the upper left. Once you're out of the folder you just left and try to choose another, PS Touch simply does not respond. (It doesn't lock up; it just doesn't register tapping another folder.) I could have sworn I was able to export images in multiple folder at once before.
Using a Google Nexus 2013 Wi-Fi model with Android Lollipop 5.0.1. I can record a movie if need be illustrating this potential issue.Update: I've worked out the difference between the two sets of errors I get.
The basic error is this:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
However if my init.ora contains the line:
control_files=/opt/oracle/server/10.2.0/dbs/cntrlNEONREL1.dbf
then I instead get the second error:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
So basically these must be the same error, just in the second case I'm not trying to put the control file on the ASM so it fails at a different point.
But both errors must be because of the same cause, I suppose. -
HT5517 Is there a way to select multiple speakers from my ATV3?
I have ATV3, an iPad2, a Sony Vaio laptop and another audio system connected to my WiFi network via an Airport Express.
Via ATV I can only select one speaker / output at a time (i.e. EITHER Airport Express OR ATV). When I have a party in the house (for example) I'd like to be able to select both to play the same music.
I know you I can select multiple speakers if I fire up the laptop and run iTunes (I then actually use the "Remote" app on the iPad, select my music library as the source and I can select mulitple speakers) but it doesn't seem possible with just ATV. Why not? I can see both outputs on ATV, I just want the option to be able to select both.
If my wife takes the laptop with her somewhere, I can't listen to my music throughout the whole house.
Seems a pretty big oversight - surely it'd be dead easy for Apple to do?I beleive multi speaker output is strictly a function of iTunes. ATV1 was the hobby or beta environment and was a mix of OSX 10.4 (iTunes) and their developement of iOS. The multi speaker out was not a part of the further or current developement of iOS.
Still have an original atv out in the studio serving up music to the rest of the house... including the new appleTV2 in the living room -
New Version Of iTunes Wont let me use "multiple speakers" thru airtunes...
The New Version Of iTunes Wont let me use "multiple speakers" thru airtunes with airport express.
I have used airport express to play music while simultaneously playing it thru my computer speakers, but the new version of iTunes wont let me select "Multiple Speakers" from the menu at the bottom of the windowThere doesn't seem to be a link to this firmware update, can you repost it? I'm having the same problem.
Thanks
J -
How do I select multiple contacts for an e-mail?
Using an iMac and wondering how to send an e-mail to multiple people in my contact list without having to open the contact list every time I select a name. It would be nice if I could just open the contact list and select multiple people for the same e-mail. Does anyone know how to do this?
Hi there Kathy, The easiest way is Window (along the menu bar) > Address Pannel, then you can select multipul contacts and then click the "To:" Button in the top left of the window.
(Tip: You can use comand and click to select multipul at once, then click the "To:" button in the top left) -
Unable to select multiple images for upload
I have Windows 7 Pro and FF 9.0
I have an online store and am always uploading product photos for items I have listed. I recently switched from XP Pro to Windows 7 Pro. I had no issues with XP. However, now that I have Windows 7 Pro I am unable to select multiple images for upload when using FF. I can only select one image at a time.
The issue is unique to FF. I have tried in several other browsers, and FF is the only one that I am unable to select multiple images from.
I had FF 8.0.1 and upgraded to 9.0... hoping that would resolve the issue. It did not. I have restarted my computer several times which has also had no effect.Hi,
Welcome to the Discussions
I see it is about 6 hours since you posted, so I guess you will get this when you wake. (I'll be sleeping then)
This would be better asked in the forum for Using Leopard inside the Leopard Category sating which browser and which site it was.
(it probably made lots of sense to you when you were typing it but it seems a little short in facts or workable info.)
8:43 PM Wednesday; March 24, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK) -
Can't select multiple slices at a time
Hello,
I'm having a bit of a technical problem. I have used my slice tool several times before with no problems whatsoever. However, I recently ran into a weird problem with my slice tool. After I slice an image up using the slice tool, I am no longer able to select mutliple slices at the same time. When I select one slice, and hold down the shift key to select another slice, the other slice is just selected alone. I reinstalled Photoshop and I also reverted back to the default settings; all to no avail. I'm currently using Photoshop 7.0.
Anyone know how to fix this problem?
Thanks in advance for the help.If i remember right, in photoshop 7, you can only select multiple slices
using the save for web function in photoshop 7 or in Image Ready.
I don't remember be able to select multiple slices in photoshop 7 proper
outside the save for web dialog.
MTSTUNER -
Dispatch center - Select multiple tasks for scheduling at the same time
Hi!
I need a consultation regarding Dispatch center. Is there a functionality to select multiple tasks for scheduling at the same time for one resource?
Please, guys, this is urgent.
JanYou can schedule a single task or multiple tasks automatically directly from the
dispatch center. The scheduling criteria applied come from Advanced Scheduler.
Make Sure, you have the advanced scheduler. With out Advanced Scheduler and by just using Advice, you can only assign one task at a time.
HTH
ps: for more information, refer Field Service User Guide, "Scheduling Tasks" -
About iPad iOS 4.2 beta Airplay can't use multiple speakers?
About iPad airplay can't use multiple speakers?
My iPad use the latest ios4.2 beta1 ,there is 3 airport express in my house.
In iOS 3.2 I can use the App "Remote" to control 3 speakers perfectly,but "Remote" even can install in ios4.2 ,not use smoothly.
After I upgrade iOS to 4.2, I can use Airplay to control each speaker without "Remote",but can't use multiple speakers at the same time. Is anyone like me?
Is there have any other solution can fix this problem?
Thanks!I completely agree with Tamara, if you are running iOS 4.2, then you should also realize that there are two aveanues for you to get questions answered
1) the developer forums (there is a specific forum area for 4.2 questions, marked in a big red banner across the top saying something about confidentiality.)
2) The bug reporting tool available to developers, noted at the top of the iOS 4.2 forum page. When you go there read the format intructions linked to at the top of the form to ensure you put it in the format that is required for formal developer bug reports.
Jason -
Can not select external input for sound
can not select external input for sound
Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
How can I select multiple photos of files without selecting each individual one
How can I select multiple files or photos without having to select each individual one? Like you can do on Windows
Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking. -
How can I select multiple photos without tapping on each one individually
How can I select multiple photos without tapping on each one individually?
Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking. -
Is there a way to select multiple speakers with Apple TV?
i don't think so if I remember properly... I've wanted to do that and I remember I couldn't... would be a good feature!
Maybe you are looking for
-
Could you help me ,I have a problem with backups on tape drive .The error which Windows throws is "BackupTapeFile::UnloadTape: PrepareTape(UNLOCK) failure on backup device '\\.\tape0'. Operating system error 21(failed to retrieve text for this error.
-
Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)
Hi Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)?, I can only see Linux version. Any help is appreciated.. - Jai
-
Hi, I'm trying to create a form via JDAPI. I want to create a record group based on a SQL query. // create record group (SQL query based) RecordGroup rgSql = new RecordGroup(fmb, "RG_SQL"); rgSql.setRecordGroupType(JdapiTypes.REGR_QUERY_CTID); // cre
-
How can I take a text message and either print it out or forward it to my email address
I need to save the text message for proof of conversation in the future
-
Dear Expert, Can anybody tell me wat are the standard BAPI available for doing cost element based /activty input planning in SAP. Thanx in adv. Regards Ashis