Can't select multiple speakers in iTunes 10.3.1

Since updating to iTunes 10.3.1, I can no longer select multiple speakers (Airport Express, AppleTV) to stream music. Even though the checkbox looks clickable, it does not stay clicked.
I have a 2x2.8 Ghz Quad-core Intel Xeon MacPro running 10.6.8.

open system preferences
open network pane
select airport in the left list
click the advanced button
go to the TCP/IP tab
set the configure IPv6 field to OFF.
click OK
click apply
now try again to connect to your remote speakers.
if this doesn't help, you may be suffering from wireless interference.
download iStumbler and note the channels other networks in the vicinity are broadcasting on, then change the channel your network is using as far away as possible from those.

Similar Messages

  • Can't Select Multiple speakers for AirTunes

    I have had a problem for the past few days now where i can't select to use multiple speakers when using AirTunes.
    This has never happened before, and was fine after the update to iTunes 7.
    Is there something i need to change / select in my AirPort preferences to make multiple speakers enabled?

    Do you have the latest Firmware of the AirPort Express V6.3?
    There could be a problem with older versions of the firmware and the new iTunes 7. Then I would also update iTunes to the newest version 7.0.1.

  • AirPort express work as a wi-fi router, but can't select external speakers in ITunes to stream music

    I set up my AirPort Express as a wireless router and it works great.  It is plugged in to an external set of speakers, but I cannot select them in ITunes and stream music.  The speaker selection box that is supposed to be in the bottom right corner is not there.

    Having the same issue. Updated iTunes software yesterday and now the speaker selction box has dissappeared. I've been streaming music to my stereo for years using this method. Have tried accessing it from the remote app and the speaker selection option is gone from there too.

  • How can I select multiple songs in iTunes without having to hold the Command key while clicking each individual song

    Trying to drag a block of songs from iTunes into TuneUp and I have about 1800 songs to bring in.  TuneUp maxes out at 1000 songs per batch, so I can't use Select All, but I also don't want to Command + Click 800 times to get all of those songs selected. 
    Thanks in advance. 

    Answered my own question.  Select song at the beginning of the list.  Hold down the shift key.  Go to the last song you want in your list.  Click that song.  All songs in between will be highlighted.  Such and idiot. 

  • Cannot select multiple speakers ( airport express)

    cannot select multiple speakers in itunes ( have two airport expresses) ... tries to connect and then always times out.

    Only firewall I have is what is standard on my mac, and if that is what your talking about, I do not know how you do that UDP traffic thing.

  • HT5517 How can I choose multiple speakers to play simultaneously from AppleTV in the same way I can from iTunes on my PC?

    Is there a way to select multiple speakers with Apple TV?

    i don't think so if I remember properly... I've wanted to do that and I remember I couldn't... would be a good feature!

  • HT5517 Is there a way to select multiple speakers from my ATV3?

    I have ATV3, an iPad2, a Sony Vaio laptop and another audio system connected to my WiFi network via an Airport Express.
    Via ATV I can only select one speaker / output at a time (i.e. EITHER Airport Express OR ATV).  When I have a party in the house (for example) I'd like to be able to select both to play the same music.
    I know you I can select multiple speakers if I fire up the laptop and run iTunes (I then actually use the "Remote" app on the iPad, select my music library as the source and I can select mulitple speakers) but it doesn't seem possible with just ATV.  Why not?  I can see both outputs on ATV, I just want the option to be able to select both.
    If my wife takes the laptop with her somewhere, I can't listen to my music throughout the whole house.
    Seems a pretty big oversight - surely it'd be dead easy for Apple to do?

    I beleive multi speaker output is strictly a function of iTunes. ATV1 was the hobby or beta environment and was a mix of OSX 10.4 (iTunes) and their developement of iOS. The multi speaker out was not a part of the further or current developement of iOS.
    Still have an original atv out in the studio serving up music to the rest of the house... including the new appleTV2 in the living room          

  • How do I select multiple tracks in iTunes?

    It's like a hold down control and something else, and then drag the curser to select the songs you want selected. I'm not sure what this shortcut is. Again, I want to select multiple tracks on iTunes so I can move files or delete them. Simply selecting all won't work because the files are different names. Anyone know this shortcut? Thanks!

    If you click a track, hold down shift, and then click another one, it will select all the tracks between those two. Holding down command (the apple key) will allow you to select/deselect individual tracks.

  • Get -3256 error when trying to use "multiple speakers" in iTunes

    I have had a LOT of Airport problems since switching to Leopard. For the moment, the Airport does seem to now work. I use an Airport Extreme 802.11n, and an Airport Express using WDS. I had a TON of problems with my MBP connecting, running great, then slowly losing bandwidth. For the moment, all is working. The next hassle was that my formerly working WDS stopped working. Now, the base station says WDS is happy. iTunes show the Airport Express is available to broadcast to.
    It lets me select multiple speakers, but then gives and error -3256.

    I think that I just solved your multiple speaker issue in another post; check out: http://discussions.apple.com/thread.jspa?messageID=5765343&#5765343. Hope this solution works for you too.

  • Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
    The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

  • How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

    How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

    The library exists regardless of which user is logged in.
    The only way around that is to create different user accounts on the computer.
    There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

  • How can I select multiple photos of files without selecting each individual one

    How can I select multiple files or photos without having to select each individual one? Like you can do on Windows

    Op: without tapping on each one individually
    tap all the photos you want to delete.
    Note what the OP is asking.

  • How can I select multiple photos without tapping on each one individually

    How can I select multiple photos without tapping on each one individually?

    Op: without tapping on each one individually
    tap all the photos you want to delete.
    Note what the OP is asking.

  • HT1766 How can I have multiple iphones on itunes and prevent them from having the info from one ipone going to the other

    How can I have multiple iphones on itunes without them sharing contact info

    If contacts on each iPhone are being synced direct with the same supported address book app on the computer via the iTunes sync process, deselect Sync Contacts under the Info tab for the iPhones that you don't want synced with the same address book followed by a sync.
    If each iPhone is sharing the same Apple iCloud account with Contacts enabled for over the air syncing, each iPhone needs its own iCloud account.

  • How can I save multiple Iphones into Itunes?

    How can I save multiple Iphones into Itunes as independent devises? In the way we have it now they are sinking into each other.

    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for