Can't select NEFs with DNG

I'm running CS3 on a 2 GHz Intel Core Duo MacBook Pro that I've just upgraded to Snow Leopard 10.6.7.  I'm trying to convert raw NEF files shot with a Nikon d7000.  I understand that those files are not supported by CS3 Camera Raw (I have version 4.3.1)  I have downloaded the DNG converter but am unable select the NEFs I want to convert.  I have tried the various compatability settings in preferences but nothing is working.  Any ideas?  Thank-you.

I don't know if it would help, but there is a newer version of ACR for CS3 you could try.  Go to the Adobe updates site, select Camera RAW Mac in the dropdown at the top and follow the links:
http://www.adobe.com/downloads/updates/

Similar Messages

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • 7th generation.  I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I

    I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I also can't use my finger to scroll volume.

    Hello HoopsMD,
    Welcome to the Apple Support Communities!
    I understand that the display on your iPod nano (7th generation) is not responding to your touch as you would expect. In this situation, I would recommend reading over the attached article and working through the steps within to help resolve this issue. 
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Display
    Follow these steps if your iPod doesn't respond to your input or has a display-related issue.
    Screen is unresponsive and displays Apple logo or white screen
    Reset iPod by holding down the Sleep/Wake button and Home button until you see the Apple logo appear. If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes.
    If the Apple logo does not appear, or if the iPod is not seen in iTunes, connect it to iTunes and try to restore.
    Touch screen does not accept input
    Clean the screen with a microfiber polishing cloth.
    Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
    If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
    The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
    Sync with iTunes and restore the iPod.
    Have a great day,
    Joe

  • Can only select items with direct selection tool

    I have been working on a design: one layer, with multiple groupings, nothing is locked. I'm trying to select the items with the selection tool, but can only select items with the direct selection tool (which is very inconvenient in this case). I can select the text with the text tool, but that really serves no purpose in my case. Anyone have any ideas as to what's going on? When I was working on it yesterday, everything was fine with all the tools. Thanks in advance.

    Imcookin,
    It may be a corruption of preferences, or an issue outside Illy.
    You may try to close down and just restart, or close down and restart pressing Ctrl+Alt+Shift/Cme+Option+Shift, or close down and use the suggestions in Move the folder or, if none of those suggestions help, have a look at the list in Other options

  • Can't open NEF with Camera Raw from Bridge

    I recently updated to CS6 and got a new Nikon D600.  Downloaded the lastest DNG converter but when I pull up files in Bridge I can't open them with Camera Raw anymore.  My process was to open in Bridge.  Select the NEF files I wanted then click mouse+control, which gave me a menu to open in Camera Raw.  Now my only option is Photoshop CS6.  I downloaded the trial for Photoshop CC and Bridge CC but still can't select to open with Camera Raw.
    What is going on?  I have never had issues like I have been.  HELP Please.

    From your description it sounds as if Camera Raw isn't installed, or is installed incorrectly. In Photoshop go to Help/about plug-ins/Camera Raw and verify that you have it installed correctly. Since you are on a Mac, I cannot advise as to where it should be installed.
    The other thing I have been thinking about in your situation is, how were these images downloaded from your camera?if you used an older version of Nikon Transfer it can alter the files so that they cannot be opened in Camera Raw.
    Do you have other software like ViewNX2 or CaptureNX2, and will those programs open your files?

  • Can't select albums with photoshop elements 10 with iTunes 10.6

    I first upgraded Itunesvto 10.6 and the downloaded the trial version of adobe photoshop elements 10, never had any previous photoshop versions.  When I go into iTunes and go under the sync photos tab and select the photoshop elements for "sync from" I can't select albums, only all photos.  I have only two "smart" albums in elements, but I figured they should be seen.
    I tried a solution from another forum, but it did not work.  It was:
    1. Open catalogue in elements
    2. Rename catalogue
    3. Optimize renamed catalogue
    4. Restart iTunes
    This did not work.
    I'd like to avoid manually updating the folders as I really only want to have the previous 3 or 6 months worth of photos on my iPad
    Thanks.

    I solved the mystery. It had to do with the file metadata in the Photoshop Elements catalog. When I moved the catalog (pictures) from my old machine to the new machine, the path (folder location) of the images changed. So, although the catalog had cached thumbnails of the photos to display in Photoshop Elements (which tricked me into thinking that the path to the images was correct), the paths were actually wrong. All I had to do was “reconnect” the missing images (a feature in Photoshop Elements which corrects missing/wrong paths to images) and now everything works correctly (sync in iTunes).

  • Can't select user with keyboard on login

    I know this seems trivial, but these things usually mean a bigger underlaying problem.
    When I restart the computer and the login screen appears, I used to be able to type the letter of the user I wanted to login as, then type the password and log in. But lately, I can't select the name by using the keyboard. I have to use the mouse to select the name, then type the password and log in.
    Like I said, trivial, but does anyone know what's happening? The entire system has been acting quirky lately and I've rebuilt the permissions about 3 times a week for the past month. Should I zap the PRAM? I've also run Onyx twice in the last week, but it doesn't seem to help (one thing that's happening is that when I go to a web site,the progress bar in Safari seems to move across at a quick clip, but then it hangs for anywhere from 5-20 seconds while it's seemingly loading the graphics...I've reset the cache and cleared the history, but it still happens...I have DSL).
    Is this going to require a reloading of the system? Geez, I hope not...
    As usual, thanks in advance,
    Lloyd

    It already has...
    This is the third time I've had to use DW, and it's been a godsend each time. The first two times, the HD couldn't be recognized at all. I panicked, researched a little as to whether I should get DW or TechTool, then drove approximately 35 miles to the nearest mall (well, the nearest mall that has any decent stores in it!) and bought DW from Best Buy for $99. I needed it right away because I was in the middle of a project, so I couldn't wait for mail order.
    I can't even guess as to how much it saved me in time and money by ressurecting that HD myself. I'm in the process of buying a 500GB internal to replace my Firewire drives, and I thought that I might also need a new one to replace the one with the system on it. But after today, I might just run DW once a month to keep it "clean and smooth."
    Again, thanks for your help. It pays to look at the big picture!
    Lloyd

  • I can't download anything with dng and zip extensions

    I'm new with the Lion System and I'm very upset because when i'm trying to download something from the web with dng and zip extensions nothing comes down, everything gets blank, please I need some help with this problem.
    Thanks.

    Is the problem with Safari, or some other web browser? Do you mean DMG, or DNG?

  • Can't select paper with Epson R1900

    I am using a new r1900 with Photoshop Elements 6 and Aperture. In Aperture everything is great! I get the print dialogue box which features all the epson papers and theirr subtypes. (Glossy, Matte, Art and submenus) But in Elements I get an old dialogue box with 3 paper types. I can select icc profiles and set color management from inside Elements-all the profiles are there. But when I go to print-poof-no paper types. Why is Elements not showing what Aperture does? Have downloaded the latest drivers and updated Elements. Also-where does Apple drop that driver? Desperate to print.
    thanks!
    nj

    Well, since it's not unique to PSE, I don't think this will help, but it can't hurt, either:
    go to your username>library>preferences and delete;
    com.adobe.Photoshop.Elements.plist
    Adobe Photoshop Elements 6 paths
    Adobe Photoshop Elements 6 settings
    Opera preferences
    Repair permissions.

  • Can't select layers with transparency

    Hello all!
    Some things just happend and I have no idea why.
    1. I can no longer nudge grouped layers. Photoshop complains that it cannot nudge layers in a group. I'm pretty sure I have done this many times before, so I guess I'm doing something wrong here.
    2. When I try to move a layer selected in the layer panel (or selected via ctrl-alt-right click), a click on the layer selects the layer effect above instead.
    It seems like there is some kind of click through enabled. If I click on a transparent part of the layer, the layer below get selected instead.
    My first thought was that this had something to do with "Autoselect layer/group", but it's disabled.
    This drives me crazy, how can I go back to normal mode, so I can click anywhere in a layer, transparent or not, and move the items in it etc?
    (I'm using Photoshop CS6.)
    Thanks in advance!

    1) Is a Selection active?
    What is the exact meassage?
    2) Could you please post a screenshot with the pertinent Panels visible?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Smart mail box can't select messages with one or another e-mail addresses

    I am creating smart mail box trying to collect there emails with two different email address
    I select following options:
    Contains messages that match ANY of the following conditions:
    Entire message contains email address N1
    Entire message contains email address N2
    It returns not a single message. It looks to me that because I select ANY it should pull in all messages with email address N1 OR email address N2.
    What do I do wrong?

    Hi JB.
    If Connection Doctor cannot establish a reliable connection with the SMTP server, this is clearly a connection problem, and there is little you can do in Mail to fix it other than making sure your settings are what the server expects.

  • CS2 - Can't select points with direct selection tool

    Noramlly in CS5 and any other version of Photoshop or Illustrator that I know of, if you click a point in an object, it will show the handles for transforming the line. As I'm creating something today, it works for a while and then stops. Yesterday I had the same problem. I drew a few things and then suddenly, the Direct Select Tool is not showing any transform handles.
    I can get them to show if I can click and drag a box over the point, but this is slow and doesn't work well for layered art. I already tried resetting my illustrator preferences. Any other ideas?
    EDIT: Also, in CS5 there's a simple icon that you can click to convert the currently selected point from a curved point to an angled point. Is there not such a thing in CS2?
    I ask because at work I only have access to CS2.

    Gregor,
    Sometimes Illy gets distracted an confused when others start intruding. The usual suspects are listen in Item 7 in Other options .
    You did get rid of the preferences while Illy was alseep, no?

  • Can't select calendar with creating event on iPod touch

    Hi everyone - Thanks in advance for your help!
    Here's the deal:
    I have 4 calendars on Google Calendar. I use google's "Calaboration" to push those calendars to apple ical on my macbook pro. Those calendars then show up just as they should on my ipod touch. All that works like a song. Couldn't be happier.
    To be clear, those are the ONLY 4 calendars I use. I have not, and don't plan to create any others in ical.
    HOWEVER, when I try to create an event using my IPT, it will not allow me to select which of those 4 calendars I want to use. I can see the field where I would do so, but it's grayed out. Instead, it creates a 5th calendar called, creatively "calendar" and puts the event there.
    The new "calendar" shows up in ical on my MBP, but of course does not sync to google.
    What's worse, I can't even change which calendar I want it to show up on in ical on my MBP.
    Any help is greatly appreciated!
    J

    I think I solved it unless someone knows a better way (likely). I went from manually manage to auto sync. That drastically increased my free space. Apparently that made the "keep only newest episode" command go from itunes to the ipod.
    Once my space was freed up I went back to manually manage so I could use smart playlists again.

  • I can't select text with the mouse

    When I click anywhere in a text string the cursor automatically goes to the 'home' position. If I try to select text by scrolling across text with the mouse button down the cursor also returns to the 'home' position and no text is selected. Any ideas?

    Nee more info.
    Are you working with Flash Professional?
    Is thas an AS3 file?

  • I can't select "Replace With After Effects Composition"

    Hi,
    I am having problems with premiere pro CS6 which wont let me select the option "Replace With After Effects Composition"  on my clips. Its there but grayed out...any ideas how to fix it  ???
    Thanks for the help in advance

    Hi KiaM8,
    See if this article helps: http://www.digitalrebellion.com/blog/posts/adobe_dynamic_link_troubleshooting.html
    Thanks,
    Kevin

Maybe you are looking for