Can't select trigger in Muse

I created a lightbox composition with several triggers. I just clicked on the plus sign to add a new trigger, but I can't select it to move it around, change the background color etc. Right now it's transparent. When I mouse over it, there's no way to select it. If I mouse over the borders, the tooltip comes up but says "Composition", which I don't want since it would be selecting the whole composition, not just the trigger. I REALLY don't want to have to rebuild the page, but I might have to.

Bruce,
When you click on a widget, it selects everything in order. On the fist click, it will select the widget (Composition in your case) and then on the second click it will select the trigger.
So you need to take the mouse pointer on top of trigger and click on it twice/thrice (depending on the type of widget you are using) to select the Trigger.
And to confirm which item is selected at the moment, you can check the "Current Selection" option in the toolbar at the top left which shows the name of the item which is selected.
Please have a look at the screenshot for Current Selection option :
Hope this helps.
Regards,
Sachin

Similar Messages

Muse Lightbox slideshow: Hero images are undersize & cropped, can't select to change them

Mac, Mavericks, & Muse: First website: Building Lightbox slideshow. When a thumbnail is clicked in Preview mode, Hero image is undersized and cropped (placed jpgs are max 600 pixels x smaller). Back in Design mode, I can't select the Hero to resize it. Both thumbnails and Hero images are set to Fit Content Proportionally.
Any help greatly appreciated!, Thanks!

I've had a similar-ish issue to you, minus cropping. Two key things:
1) To edit the position or size of the hero image double-click it
2) If the original image is smaller or larger or differently sized than the target Hero frame this (above) will happen. What I did was to
scale the frame for the Hero image to the intended area, then get the dimensions of that area using a rectangle. Copy the vaues to make a new Photoshop document and
manually import the images individually and save the resulting JPEGs which will have the additional space around the image to fill it for the Hero (ideally scale the image to fill the target space by losing any necessary empty space).
Essentially the original images you're using must be the same as the resulting frame which is no good if they're all different sizes. Yeah, it's a pain.
Hope this helps. Look at my website homepage as an example: http://www.goodwinsanimations.com/

Muse, how can i select "web safe fonts" in korean font?

when i using Muse,
how can i select "web safe fonts" in korean font?
there are only english web safe fonts in muse.
so i can't select national language(korean) in web safe fonts...
a there any updates about this..?
now in muse, i always using korean fonts in image;;

At this time, English and Japanese is the only locale for which Muse provides an alternative set of web-safe fonts. You wouldn't see them in Korean. A similar thread here - http://forums.adobe.com/message/5492379
Thanks,
Vinayak

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

Can't select anything in design mode

I am new on a large Flex project, and when I go into design mode on one of the mxml files, I can't select anything. The other views work fine. Is there a lock, or something? Below is what it looks like (black mark just hides brand info). Note that there is a red line near the bottom. It is actually selectable, but it doesn't do anything. If I go to Source mode and select a chunk of code, then back to design mode, it does show it as selected.
This in Flex Builder 3, thanks.

Have you tried using the outline view for selection?
Jason San Jose
Software Engineer, Flash Builder

Can not "select" partitioning snapshot ?

I can create partitioning snapshot ( Oracle 8 ) , but I can
issue SELECT statement with partition-extended object name
Ex : Selet * from snapshot_name patition ( par_name )
How to SELECT data from snapshot with partition-extended object
name ?
null

I can create partitioning snapshot ( Oracle 8 ) , but I can
issue SELECT statement with partition-extended object name
Ex : Selet * from snapshot_name patition ( par_name )
How to SELECT data from snapshot with partition-extended object
name ?
null

Can not select TV speakers when connected via HDMI

I have a MBP fully updated connected to a Sony TV vis HDMI/miniport. Up until today this configuration was working fine. Suddenly, I can no longer select the HDMI speakers in my audio preferences. They are recognized and appear on the list but when I select them it has no effect. Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it.
I have restarted with no success in changing this behaviour. If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted. I can manually select the TV speakers but the setting has no effect.
However, I *am* getting audio output through the TV but can not control volume from the mac or any app. I slide the volume slider on the menu bar and the audio output does not change. The sound is also playing from the laptop speakers which is highly annoying.

and now there is no audio through the TV at all. TV works fine with other inputs such as PS3. Any help?

Can not select 'Show HD' in Finder Preferences

Just performed Data Migration on a new iMac Intel late 2011 from a 2 year old iMac Intel. For some reason, the Macintosh HD does not display on the desktop. If I go to Finder Preferences I can not select Hard Disks. The box is not selected, but If I try to click it, it will not stick. How do I fix that. Not much on the internet concering this peculiarity.

OK, try a couple of things. First is to do some resets, the first I'd recommend doing is restarting the computer in Safe Mode, this will clear some caches. It's possible one is corrupt. Next is to reset the SMC and PRAM, each of these should be done 2x to ensure they work. Finally if that doesn't do it open Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Permissions 2x.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Can not select an address from Contacts in Maverick

I'm able to access my address book contacts from Mail.
But when Contacts window is open, I can not select a contact (For, CC, Bcc Fields are in grey).
Is there anyone with suggestions?
Many thanks!

Hello
I am not selecting a group. I am just trying to select a contact, any contact.
But when I click on contacts icon ...
and the address book opens, nothing happens when clicking on a specific contact.
Besides, the fields For (= Para), Cc and Bcc, are not active...
Many thanks

Can not select from SAPTOOLS.DB6PMCF

We use third-party tool to monitor our SAP systems. We receive an error
Can not select from SAPTOOLS.DB6PMCF
when we monitor DB2 database.
Function DB6PMCF is registered in SAPSID schema. Can I register it also in SAPTOOLS schema? What is a correct procedure for this?

Hi Milan,
I think you have to issue the following command for the affected user.
db2 "grant execute on function saptools.db6pmcf to <user>"
regards, Javier Rocha

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Can I Select from table skipping extents linked with lost datafiles?

Hi~,
I need your help to recover my database.
I'm using oracle 9.2.0.8 at Fedora 3 with no-archive mode.
and I don't have any backup.
Last night, I experenced hard disk failure.
I tried OS-level recovery, but I lost some datafiles of tablespace.
anyway, I wanted to recover my database without data of lost datafiles.
so, I issued "alter database datafile offline drop" and
start oracle instance.
But, datafiles were not removed from dba_data_files view and
extents linked with lost datafiles were not removed from dba_extents view!
Selecting query of some table containing extents linked with lost data files,
I got "ORA-00376: file xxx cannot be read at this time" message.
So, my question is that..
HOW CAN I SELECT FROM THAT TABLE WITHOUT SCANNING EXTENTS LINKED WITH LOST DATA FILES?
Thanks.

Hi,
Without being in archivelog and without backup, one can't do any sort of recovery. That's why backups and archivelog are so so important.
The offline data file command never does actually drop the datafile. It merely indicates to the control file that now the said tablespace will also be dropped. This won't update any view that the files are not supposed to be used or shown to you anymore.
This is what documentation says about the recovery of the database in the NoARch mode,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007937
You do need a backup in order to get those tables being read. Oracle doesn't have any feature which can offline/skip the missing extents for you and let you read the data without them.
HTH
Aman....

Running Multiple SQL in a Single Worksheet: Can I Selectively Run a Single SQL and Append Output?

In any release of SD, if I have a single worksheet containing 10 sqls. Is it possible to place the cursor on any of the sql and run only that sql, yet, append its output to existing output window. I can then select another sql and execute it and keep appending output. In other words, do not clear existing output or start a new output tab.
As it exists today (in any release), I can either 'run script' which does append, but it executes all the sql (non-selective). Alternately, I can 'run statement' to selectively run a single sql, but it will clear the output window (or if pinned), start a new one. None of this is what I want.
Thank you.

Select the query you want to run. Execute it via F5. Then highlight the next query and repeat.
The output will append to the Script Output panel.
There's no way to get 2 queries to share a grid, unless you were to run them as a single query a la UNION.

New owner here. How can I select specific pages of a document found on line and print just those pages. What I see is the ability to select only 1 page at a time and print that one selected page only. Thanks much.

New owner here. I see that in printing I can select one page and print same. How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time. Thanks much

Just change the range as illustrated below. If you don't see that, click the Show Details button.

Can't select trigger in Muse

Similar Messages

Maybe you are looking for