Can't send audio attachments using Finder Menu Services Mail anymore

Hi, all:
One of my favorite features of iTunes was the ability to quickly send audio files as attachments using Mac Mail. Before, if I had an MP3 highlighted in the iTunes Library, and I selected iTunes (Finder Menu) > Services > Mail > Send File, my default mail handler (Mac Mail) would open up a new message window with the underlying MP3 file referenced in the iTunes Library already embedded as an attachment. As a musician, I appreciated the simplicity of the workflow required to send compositions to collaborators.
However, recently, that path of steps doesn't work anymore. I can still send the text information of the file (using Finder Menu > Services > Mail > Send Selection, but I can't use the > Send File to quickly attach the file anymore. I should note that the > Send File feature still works fine in other contexts (e.g., when I've selected a file in a Finder Window).
Is there something corrupted in my setup, or did Apple take this feature away for some reason? Any help would be appreciated. Thanks!

Hi Paulo, and a warm welcome to the forums!
It sounds like you have a more serious problem.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.

Similar Messages

How can I send multiple attachments using SO_DYNP_OBJECT_SEND?

Hi,
I hope someone can offer advice on my problem.
My requirement is to allow users to select one or more documents from an ALV grid. I am then required to send these documents to multiple users via email using function module SO_DYNP_OBJECT_SEND.
I can successfully send one document as an attachment. However, I can't seem to figure out how to send multiple documents as attachments using SO_DYNP_OBJECT_SEND. Is this done in the packing list?
Is there some way to tell the program where the 1st attachment ends and the 2nd attachment starts?
My attachment content is in i_att_cont.
CALL FUNCTION 'SO_DYNP_OBJECT_SEND'
    EXPORTING
      object_hd_change = l_title
      object_type      = 'RAW'
      raw_editor       = abap_true
      starting_at_x    = '5'
      starting_at_y    = '1'
      ending_at_x      = '120'
      ending_at_y      = '20'
      edit_title       = 'X'
      external_commit = abap_true
    TABLES
      objcont          = i_objcont
      rec_tab          = i_rec_tab
      packing_list     = i_packing_list
      att_cont         = i_att_cont
      exclude_fcode    = i_exclude_fcode
    EXCEPTIONS
      object_not_sent = 1
      owner_not_exist = 2
      parameter_error = 3
      OTHERS           = 4.
If you require more information, please let me know. I will be happy to provide it.
Thanks.

I finally found the solution.
The trick is to ensure you put the correct values in the body_start, body_num and objlen fields of the packing list.
Each additional attachment should start (body_start) at the end of the last attachment + 1.
The value for body_num is equal to the number of lines in the attachment being added.
And the objlen field is calculated by multiplying the number of lines in the attachent * 255.
Static data
   gs_packing_list-file_ext = lv_ext.
   gs_packing_list-transf_bin = 'X'.
   gs_packing_list-objla = sy-langu.
   gs_packing_list-objtp = 'EXT'.
   gs_packing_list-objdes = lv_filename.
   gs_packing_list-objnam = 'Attachment'.
   gs_packing_list-head_start = 1.
   gs_packing_list-head_num = 1.
Body Start
   CLEAR lv_count.
   DESCRIBE TABLE gt_temp_att_cont LINES lv_count.
   gs_packing_list-body_start = lv_count + 1.
Body Num + Object Length
   CLEAR lv_count.
   DESCRIBE TABLE gt_att_cont LINES lv_count.
   gs_packing_list-body_num = lv_count.
   gs_packing_list-objlen = lv_count * 255.
   APPEND gs_packing_list TO gt_packing_list.
Hopefully this helps some desperate soul in the future.

TS3276 I am unable to send large attachments such as video or pictures. No problem when using windows 7. How can I send large attachments? Thanks, ..Sam

How can I send large attachments such as pictures or home videos?.....with windows 7 it asked me to send using Skydrive. I downloaded Skydrive and still no better........
Thanks
Sam

How big of a file you can send over an email, is not determined by Apple, but rather by your email service provider. For example, if you have a Gmail email address, they let you send up to 25 MB of data
http://support.google.com/mail/answer/8770?hl=en.
To find out how big of a file your email service provider will let you send, do a google search for "your email provider maximum file size".
If you need to send larger files, look into something like "Drop Box" -
https://www.dropbox.com.

How to use 'Find' menu in Screens

Hi all,
I wanted to know how to use 'Find' menu in screens.
Actually I have created a screen through SE51 and used the pushbutton to assign the function 'Find' ( one with binoculars ). The screen uses a table control to bring all the data from the DB table in the PBO module. When the user uses FIND button the system should prompt a search pop up screen onto which he will enter the search parameter and when he enter that the corresponding line item should be displayed on the tablecontrol. I wanted to know what logic should be incorporated in the program if that pushbutton is used. Please reply immediately. Its urgent.
Regards,
Bhavani.
Edited by: BHAVANI MADIREDDY on Apr 1, 2008 12:31 PM

Hello,
In the PAI under a module (user_command for example) when the user click the button you should use the command READ TABLE (if you look at the help, there's some options to do the READ dynamically - [http://help.sap.com/saphelp_nw04/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm]) to get the line index and with it you set the TOP_LINE of the table control ( tc_table-top_line = sy-index for example).
Doing this the selected line will be the first in the table control on the next step (PAI/PBO).
Regards,

Maximum file size data that can be send to MQ using mq adapter

Dear All,
What is the maximum file size data that can be send to MQ using mq adapter ?
The file can be csv, fixed , xml.
Please let me know if anybody is aware of any limitations
Best Regards
Arc

If you are on 10g then you are looking at a limit of 7MB, although any messages over 1MB will require some tuning.
You can integrate using the native schema, or xml so you can use csv, fixed length, and xml files.
cheers
James

My friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...my friend ipad 2 was stolen if they reset the device in factory setting,just wanna as

my friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...

It's unfortunate that your device has been stolen. You can report this to the police, but as has been answered before, if the device is restored you CANNOT locate it.
It probably is technically possible to track your device by the SIM; law enforcement will not waste their time doing so. Besides, the thieves have probably changed it anyway.
While unfortunate your iPad is gone, you really need to move on.

How can I send whatsapp messages using Siri ?

Hi,
How can I send whatsapp messages using Siri ? or how can I ask Siri to read my whatsapp messages ?
thanks for help!

kladrian wrote:
this is not the case in particular
Yes it is. If it wasn't the case, then why are you asking the question to begin with?
why everytime I have a question about a simple activity present in Android system I get in response ... "you can't sorry" !?
1. Because iOS is not Android
2. Because it's the truth, whether you like it or not

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Cellular data is a feature from your phone carrier. Have you contacted them to resolve your issue.

Can someone send me link to find out if i have a fake or a original i phone?

Can someone send me link to find out if i have a fake or a original i phone?
<Email Edited by Host>

https://selfsolve.apple.com/agreementWarrantyDynamic.do

I can't send out photos using I message on my iPad 3

Can't send out photos using I massage on my ipad3 with ios6

It depends on the type of e mail service you have. If you have a pop account you cannot create new folders. If you have an imap account, you can. As an example, comcast.net are pop accounts. Gmail.com addresses are imap accounts and you can set up folders.
If you are not sure what you have, put the pad in landscape and in the left side, touch the account button for your service. You should see inbox, draft, delete and trash. Look at the top. If there is an edit button, touch it and you can add folders. If the edit button is not there, you have a pop account and cannot add folders.

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?
We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible?
We both have itunes and apple ID's of our own right now, but since getting married, we are deleting these e-mail accounts and sharing one. How can we make this work?

You may use the same Apple ID for iTunes and App Store purchases, but using different iCloud Apple IDs is recommended.
If you use the same iCloud account on your iPhones it will sync all of your contacts, reminders, and notes automatically and it could be a pain. I don't know exactly how you would want to have the iCloud accounts set up on the Macs, because I don't know exactly how you use them. (I am assuming you share?). But you can do whatever you like, you can even keep the same iCloud accounts, etc but you may want to disable the syncing of certain items, because reminders for ones phone popping up on the others automatically would probably get annoying, but that is just me.

Ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail. help!

ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail. help!

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

On my 90 day old MacBook Pro I can't send or receive (Mobile Me) email via "Mail." The fetch icon keeps spinning. Any help would be greatly appreciated. I'm only one day past the free Apple care. Thanks!

On my 90 day old MacBook Pro I can't send or receive (Mobile Me) email via "Mail." The fetch icon keeps spinning. Any help would be greatly appreciated. I'm able to receive Mobile Me emails on my iphone or via the web, but just not on the laptop. I'm only one day past the free Apple care:(
Thanks!

glippert wrote:
Tkx, tjk...I tried calling Apple Care and they directed me to the forums...
I guess that's their right at one second past midnight on the 91st day.
Here's the link to the MobileMe support forums; I'd post there:
https://discussions.apple.com/community/mobileme

How can I send the html animation on the post(mail,google,yandex)?

how can I send the html animation on the post(mail,google,yandex)?

What do you mean? F you want to post your files here, put a zipped file on the cloud somewhere like dropbox, and post the link.

Can't send audio attachments using Finder Menu Services Mail anymore

Similar Messages

Maybe you are looking for