Can't send break to system

I have a SunFire V100 which I want to install a custom version Solaris 8 onto. As soon as I access the server (connected via terminal PC), I get a stream of errors as follows:
Mar 10 16:34:24 in.mpathd[36]: missed sending 8 probes cur_time 1124706 snxt_time 1124796 snxt_basetime 1124720
Mar 10 16:34:26 in.mpathd[36]: missed sending 8 probes cur_time 1125905 snxt_time 1126004 snxt_basetime 1125876
Mar 10 16:34:26 in.mpathd[36]: missed sending 7 probes cur_time 1125906 snxt_time 1125941 snxt_basetime 1125856
Mar 10 16:34:27 in.mpathd[36]: missed sending 8 probes cur_time 1127105 snxt_time 1127245 snxt_basetime 1127154
Mar 10 16:34:27 in.mpathd[36]: missed sending 8 probes cur_time 1127106 snxt_time 1127231 snxt_basetime 1127134
I tried sending Ctrl + Break to boot from CD, however this did nothing. What else can I do to boot from CD and re-install the software?
Thanks in Advance

LOM stands for light-out-management, its basicly a device which stands between you and your console. The lom can be used to power on and power off a machine, it can also be used to control and log the console.
Hence, since there is a LOM and the console, you need to keep track of two different ways of getting to your OBP.
If you are at the LOM prompt (lom>) you just type 'break', if you are at the console you use ctrl+] to get to the telnet prompt and then type 'send break' .
A small LOM tutorial, to go from the LOM to the console you type 'console', to go from the console back to the LOM you type '#.' (hash and dot).
I can also recommend typing 'help' at the LOM prompt :-)

Similar Messages

  • Can IDoc sender and receive system be the same client?

    thanks.
    I think one client can't assign to two logical system.so?

    <i>Can IDoc sender and receive system be the same client?</i>
    yes
    Regards,
    Prateek

  • I want to order multiple copies of an iPhoto book I have already purchased once. Is there a price break for multiple copies? Also, can I send to multiple addresses?

    I want to order multiple copies of an iBook I have already purchased. I have two questions:
    1) Can I send them to multiple addresses?
    2) Is there a price break for multiple copies?

    1) No.
    2) No.

  • Can i use combination peoplesoft system  and http adapter on sender side

    hai
    can i use combination peoplesoft system  and http adapter on sender side
    is their any modifications i have to do on module tab
    can any body tell me how to post data to http adapter
    is there any application gui is there to post data

    Hi
    can i use combination peoplesoft system and http adapter on sender side
    >>>Can you explain further what this means.. You can use HTTP adapter on the sender side.
    is their any modifications i have to do on module tab
    >>> No module processor allowed for HTTP adapter.
    can any body tell me how to post data to http adapter
    is there any application gui is there to post data
    >>> Check this document. It gives you information on how to build HTTP based web GUI.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
    Thanks
    Satish

  • My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!

    My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!

    You can get Firefox 3.6.20 from here. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Can we send .csv file from sap srm system to sap pi?

    Hi Experts,
    we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
    How can we send .csv file from sap srm to sap pi?
    Regards,
    Anjan

    Anjan
    As you know SAP SRM and SAP PI are different boxes.
    *_Option 1:_*
    we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
    In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
    Option 2:
    Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
    You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine.  You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using  sender file communication channel (FTP Mode) providing user credentials.
    Hope it clears now.
    Regards
    Raj

  • HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

    My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • If my iphone breaks can I send messages from my mac?

    If my iphone 5 is broken, can I send and receive texts through imessage on my mac?

    Use the Messages app.

  • Can't send email from iBook but can from iMac

    I have a iMac hardwired to the Internet with Leopard. I also have a Powerbook with Leopard and a iBook with the previous operating system. My hardwired iMac is the only computer that can send email through the my smtp server for work. It is offsite and not supported by me.
    I have changed all port settings on the two laptops but no success. I have even synced all of the accounts through .Mac and only the hardwired iMac can send emails. They all are able to received emails.
    I am able to select a new smtp server when the Mail program on the laptops tell me it has not been able to connect. I can then send the messages out through gmail, but they come from my Gmail account. This is no good when I am trying to conduct business.
    I have also hardwired my iBook to the same network my iMac is connected too (same wire) and the iBook still cannot connect to the selected smtp server (I did turn the airport off).
    Any one got any ideas or thoughts?? Can I create a SMTP server on these laptops some how? I was beginning to think it was an Airport communication issue, but after hardwiring the ibook and it still did not work, I am at a loss.

    Are you using the Verizon PW or the Google one?
    What Port is the Outgoing using?
    http://www22.verizon.com/residentialhelp/fiosinternet/email/setupanduse/questionsone/85572.htm
    Did you try using Verizons mail then in OSX's Mail set the Reply to addy as your gMail addy?

  • Can't Send Email from Iphone Using Pop Account

    I have check our host names, ports, user name, passwords etc (all the account mail settings are OK) for incoming and outgoing servers. I can receive email fine but can't send them back out through the outgoing server. I am using the identical settings that I used in my Treo (which sent out emails fine). Upon sending an email the error message I get on my iphone is: " The recipient [email protected] was rejected by the server." I've noticed that I can send an email to "myself" (from the iphone) and it will show up on the in my email box, but email sent to other addresses will generate the above message. I've noticed, too, that I have to keep resetting the "Authentication" to "Password" (under advance settings) because it mysteriously resets itself to "MD5 Challenge-Response". The setting should be set to "Password" however. We are using a FirstClass email system. Sending email via the iphone by way of .mac, yahoo and gmail works fine (no mysterious rest of the "Authorization" settings either) .
    It most me something obvious, but I can't see it.
    I would really appreciate some help.

    You might find this discussion helpful:
    http://discussions.apple.com/message.jspa?messageID=4976383#4976383

  • Mail can't send email from 123-reg accounts

    Hi all,
    I've got an issue with Mac Mail can’t send email from 123-reg accounts.
    I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
    Any help would be greatly recived, here's my situation below:
    Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
    I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
    2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
    I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
    I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
    I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
    Many thanks.

    Thanks
    I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
    I didn't even think to question the ISP.
    https://discussions.apple.com/message/21173608#21173608

  • Can't send email from home

    I have a serious problem. My wife has a Mac Book Pro for work and she can send email at any location except from home. The error she is getting is
    Cannot send message using the server smtp.knology.net:(username)
    The server "smtp.knology.net" refuses to allow a connection on the default ports. Select a different outgoing mail server from the list below or click try later to leave the message in your outbox until it can be sent.
    I have BellSouth/AT&T DSL with a Westel Versalink 327W modem. The funny thing is our local library also has BellSouth DSL and she can send email from there. Like I said, the only place she can't send email is from our house.
    Thanks

    It is the BS/ATT system you are on. BS/ATT does not allow sending email to another domain from a Residential account. I had the same problem with my work email from home. All sent mail on port 25, I think it is, from a ATT Residential account must go through the ATT servers and or ATT/Yahoo.
    Have your wife check with the mail provider for an alternate sending port. My work mail servers used port 26 for POP and some other port for IMAP.
    EDIT:
    Right the Library has a Business Account. No restrictions on the Business ATT DSL.

  • Can't send email from my personal pop3 account via my S5.  Receives mail fine.

    Hi,
    I have an S5 that I use to receive email from my personal email account (supplied by Primelink).  I can receive email fine, but can't send anything.  My SMTP server is mail.wgtest.com using port 465.  I am using K9 mail as my email app.
    I was told by Primelink that it's a Verizon Wireless issue.  Is there any way to respond to my emails from my phone?  I can send via my hotmail account, but then my hotmail sent message folder gets filled up and the reply to address always shows up as my hotmail address, not the wgtest.com address.
    How can I fix this problem?
    Thanks in advance!
    Spectre55

    Thanks for the reply.
    I have tried using three different email apps and keep getting the message that it can't connect to the server.  I'm using the smtp address of mail.wgtest.com.  As I said, I can receive fine, but Primelink told me that Verizon won't let me send from my primelink account through their system.  They said I may have to use an smtp relaying service, which I've never heard of.

  • Firefox and Thunderbird do not communicate anymore : I can't open links from TB emails ( a href... ) and can't send mail from FF pages (mailto)

    Hi there,
    Please excuse me if a make a few mistakes, I am French ;)
    I come here because firefox and thunderbird are not working together anymore. This is what happens :
    - Firefox and Thunderbird are opened
    - I click on a link in an email
    - A few seconds after that a Firefox windows pops up. The title is : "Close Firefox", the content is : "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
    Second case :
    - Firefox is closed and Thunderbird is open
    - I click on a link in an email
    - A few seconds after that a Firefox windows pops up as expected. Firefox opens the link as expected but doesn't opens the other tabs as usual (when i start FF it re-opens previous tabs)
    Third case :
    - Firefox and Thunderbird are opened
    - I click on a link to send an email (<a href="mailto:......@.....">)
    - A few seconds after that a Thunderbird windows pops up. The title is : "Close Thunderbird", the content is : "Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
    As in the second case, if TB is closed when i click on the mailto, TB opens properly and send the email.
    If Internet Explorer is set as my default browser, it works fine for "Thunderbird -> link -> IE" but the "IE-> mailto -> TB" still doesn't work.
    I already looked up for some answers on google but can't find something which works.
    Thank you in advance for your answers.
    Vincent

    Check the target field in the Firefox desktop shortcut and make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
    Always make sure to start at least the default profile without the -no-remote command line switch.
    If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.
    You can not send links from other programs to a Firefox instance that is started with the -no-remote switch.
    In such a case you need to drag links in a Firefox window or paste the link in the location bar.

  • Can't send email from internal server, same domain name as external.

    We have a domain "example.com", hosted externally, for email and a website.  We are thinking of hosting email 'inhouse' and have setup a dedicated subdomain on a 'fixed' IP, "mini.example.com" for AFP services mainly. mini.example.com provides DNS internally, its primary zone is also example.com. All access to the external web goes thru' a modem/router that the server is connected to. We have to set an A record for www access to our website.
    In our testing to migrate email, the internal setup works fine, until the switch over.  Now we can receive mail to the mini server, but can't send any out.
    We instructed our webhost provider to set the CNAME mail.example.com to point to mini.example.com and created a cPanel MX extry mail.example.com, 10 priority.  Previously, the external host had CNAME as mail.example.com to example.com and MX as example.com, 10 priority.
    Since the implementation of the CNAME change, we can't send emails out and they get stuck at the outbox waiting. Client Mail app, says to check for port and SSL and account settings.
    Any idea where we went wrong here and what we can do to get emails out? We could go to each computer and point-off the DNS to office IP, but we rather not.
    Thanks!

    Thank you Camelot and MrHoffman for your replies.
    I got in this am to find Mail.app could actually send out emails and I'm stratching my head wondering what happened yesterday.
    SMTP server addresss was manually set to mail.example.com for all accounts. In trying to get things to work, the mail setup was redone again by "Accounts", in Systems Preferences, when Login is clicked on, and mail was automatically given a SMTP as mini.example.com instead of mail.example.com.  I'm guessing that that could be where the initial 'inside' problems were, given that it had a 0 answer to the MX query. Or then again I wasn't patient enough.
    Just for completeness, and if there's something to learn from here, these are the dig results for example.com as seen from within the office network.
    ============================
    ~ dig mx mini.example.com :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> mx mini.example.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1791
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;mini.example.com. IN MX
    ;; AUTHORITY SECTION:
    example.com.                    10800          IN          SOA          mini.example.com. dnsadmin.example.com.example.com. 2011120603 86400 3600 604800 345600
    ============================
    ~ dig mx mail.example.com :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> mx mail.example.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 36128
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;mail.example.com.                    IN          MX
    ;; ANSWER SECTION:
    mail.example.com.          10800          IN          CNAME          mini.example.com.
    ============================
    ~ dig mail.example.com :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> mail.example.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35095
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;mail.example.com.                    IN          A
    ;; ANSWER SECTION:
    mail.example.com.          10800          IN          CNAME          mini.example.com.
    mini.example.com.          10800          IN          A          10.0.0.34
    ;; AUTHORITY SECTION:
    example.com.                    10800          IN          NS          mini.example.com.
    ============================
    ~ dig mx example.com :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> mx example.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47951
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
    ;; QUESTION SECTION:
    ;example.com.                              IN          MX
    ;; ANSWER SECTION:
    example.com.                    10800          IN          MX          10 mail.example.com.
    ;; AUTHORITY SECTION:
    example.com.                    10800          IN          NS          mini.example.com.
    ;; ADDITIONAL SECTION:
    mini.example.com.          10800          IN          A          10.0.0.34

Maybe you are looking for