Can't send E-mails using Outlook Express on WRT300N

Hello, I searched through the forums to find problems similar to mine, but everyone had a different router than mine, plus none of the solutions worked for me.
I just purchaced and installed my router yesterday. Since the install, I have not been able to send e-mails using Outlook Express, but I do recieve e-mails. I am using the WRT300N Wireless-N Router.
Trying to get my local news service up and running, and right now, e-mail communication is vital........
Thanks.
-Ryan French
Tampa Bay News Online

Well of course, but the error message says socket error, which doesn't tell how to fix it. Even the Outlook Express help site doesn't give any suggestions to fix anything, other than "Your internet connection has failed," which is not the problem.
To the disable firewalls suggestion: I did try disabling my firewalls and all of my virus/ e-mail scan software just to check it out. The thing is, I don't see how my Windows XP Firewall, or anything I've been using could be a problem. Right now, because of the error all my sent e-mails are stuck in the outbox, when I disconnect my router and connect everything back up leaving the router out of the picture, the e-mails are sent out as normal. This problem only occurs with the router connected.
I also need to stream live audio, and I've heard it's a pain using a wireless router...
Thanks for the suggestions, hopefully someone will provide the winning suggestion so I don't have to call customer service!

Similar Messages

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

Can't send e-mail using Mail. Entourage works fine with same settings.

I can't send e-mail using Mail. Using exactly the same settings on Entourage everything works fine.
Until earlier today (for two days only) I couldn't send either. I was advised to run Keychain Access First Aid which spotted "Item “pop3.freezone.co.uk” is a duplicate; this item's port attribute is not set" and then repaired it (Freezone is the name of my ISP). Now I can send Mail but not receive.
Even stranger is that until today I could receive Mail on one of my two accounts, while only Mail from one person got through on the other. Now no mail is arriving.
I tried swapping the plist file for an older version from a backup of my system. That didn't work either.
I'm tearing my hair out! Any suggestions?

No.
I'am sendig email from domain A using SMTP belonging to domain A.
The emails that's addressis is the same as senders (@grader.ee) are going out. But all others don't.
If there is wrong outgoing SMTP server even those emails can't send.

HT202304 Can't send e-mails using iCloud address on either my iPhone or Macs ?

Hi guys and gals,
I can't seem to be able to send e-mails using my iCloud address.
No idea why that is. I don't get any error message, the e-mails 'get sent' without any fuss or ending in the outbox folder and they simply do not reach their destinations. There doesn't seem to exist any issues with Apple either. Perhaps my e-mails are being blocked, out of the blue (not by my ISP though, I'm having this problem with whatever network I'm connected to or using internet data on my mobile). ?
Any help would be appreciated, thanks !

Hello,
Is the e-mail account in question a .Mac or .Me account at all?

Can't send iCloud mail from Outlook 2011

I have recently installed Office 2011 for Mac on my Macbook Pro and I want to set up my iCloud mail on it. I can receive mail just fine but I can't send mail at all. I keep getting error code 17092 saying that the SMTP server doesn't recognize any of the authentication methods supported by Outlook. How can I fix this problem or do I have to just use the native Mail app? Any help will be greatly appreciated, thanks!

I was having the same issue. I was able to fix by login into appleid.apple.com and setting my @me as the primary email adress.( Make sure you verify it) The deleted your i cloud account on you Iphone, Ipad or Touch then added it again. You should be able to send email using icloud

Trouble sending e-mails using OUTLOOK for MAC ;MAC I-PAD or I-PHONE.

I have the 3 devises MAC; I-PAD and I-Phone. My normal e-mail account was working fine then suddenly it stopped SENDING mail (I can still receive).
I am using OUTLOOK for MAC as my mail account.
My regular laptop works perfectly with all the same settings-it is only my apple devises.
I have attempted the following:
Reboot.
Checked all settings and changed both the smtp and the outgoing port.
Contacted the various service provider who have checked all of their settings and all is fine.
I get an error message saying OUTLOOK CAN NOT FIND THE SERVER or SERVER CONNECTION HAS FAILED, but sitting right next to me the laptop is sending/receiving as normal.
Any ideas??

Mail and Address book

Can't send e-mails using Versamail 4.0.1 form my Palm Centro (unlocked - from ATT - on Rogers network).

Good afternoon. I am using a Palm Centro I just bought (unlocked - from ATT - on Rogers network). All is working great BUT sending e-mails. Versamail is receiving just fine but refuses to send. It puts everything I try to send into the "outbox" and then tries to send only to later tell me that it unable to send. The server I go through is a POP server. It has never given me such an issue before - Any advice!!
Steve
Post relates to: Centro (Unlocked GSM)
This question was solved.
View Solution.

Hello!
With POP/IMAP email, there are 2 server. One is incomming to whihc ur ok and the other is outgoing to which that one is not. Since you are using Rogers for service, use the SMTP server from them to which I do belive is still smtp.rogerswirelessdata.com for the outgoing mail server.
Even though the phone has been unlocked, the phone design is still ATT so the versamail application is probably still using ATT's SMTP by default and you need to make the manual change.
Message Edited by thetreoguy on 05-12-2009 04:41 PM

Can't send e-mails using shaw

Hi,
I am currently using shaw for e-mail. I am able to receive e-mails but not send them.
My current settings:
outgoing mail server
smtp shawmail
primary server: shawmail (ON)
Have tried using: shawmail.cg.shawcable.net with no luck. When I try to add it under other servers it does not connect.
Any suggestions?

Thanks everyone for all your help. To answer the most recent question, yes, I did change the server to reflect my local... that's the cg (Calgary) part of the shawmail.cg.shawcable.net.
ANYHOW.... good news. It turns out I have to turn off the SSL for my shaw account. I didn't do this for any other accounts but for some reason it won't send with it on (it's fine on my macbook). Crisis resolved and I am happily sending e-mails.

Can't send e-mails using the mail program on older iBook

My daughter gave me an older iBook running OS 10.4.11 and I can't seem to send emails using the Mail application I can receive email with no problem. I have changed the ports to recommended 995 or 465 with no results. The only way I can receive mail is if ports are set to 995. Every other aspect of this iBook works fine. I just use this iBook on trips and not for heavy use so this is not critical but it would be convenient to be able to send mail. I have tried everything including duplicating the accounts as they are set up in my iMac. Any ideas?
jdb38

Hello,
Is the e-mail account in question a .Mac or .Me account at all?

After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

Sql Express Edition R2 can we send alert mail

Hi There,
We are using SQL 2008 Express edition R2. Can we send alert mail using sql services in SQL 2008 Express edition R2

Hello,
Database Mail is not supported in the Express Edition; see
Features Supported by the Editions of SQL Server 2012
Olaf Helper
[ Blog] [ Xing] [ MVP]

After I switched carriers I can't use outlook express e mail.

after I switched net carriers I can't use outlook express for sending e mail anymore.

I'm not sure what you mean. Are mail links not opening Outlook Express? If so, see [[Changing the e-mail program used by Firefox]]

Using Outlook express mail and system 10.9, sending attachments

I have a new Mac, operating system 10.9. Trying to use Outlook Express Mail from work, I am unable to send attachments. Thanks

One thing in there jumps out - the long time taken to connect to the internet after NetProtect was installed. McAfee is a notorious resource hog and that behaviour is typical of the symptoms which persuaded me and others to look for another AV. Microsoft Security Essentials has a light touch and many would recommend it, though there are several other effective, free AVs available. If you do uninstall NetProtect you should make sure to run the McAfee Removal Tool also.
I would advise you to get NetProtect out of the way and return with an update for advice on the email issues.
You can click the white star next to this message if you think it was helpful.

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

About accessing using a browser: I can get in using Firefox or Safari, butI cant set the page up to see all my inboxes at the same time (so I can file emails appropriately) or get a preview to save opening every mail

How can I read my incoming emails in one folder?Like I do in Live mail and Outlook express.

Now we can only read emails in different folders if I am managing multiple email accounts.
It does not feel so comfortable as we use Live mail and Outlook express.

'''Unified Inbox for pop and Imap mail accounts:'''
If you use the Unified folder view, this will show an Inbox with all emails from all accounts, with sub folder Inboxes for the individual Inboxes for the various accounts. Then you can choose to view the collective Inbox or the individual Inbox.
This method can be chosen simply and quickly.
* View > folders > Unified
'''Setting up Pop mail accounts to use Global Inbox.'''
Pop mail accounts can be set up to use a Global Inbox in Local Folders.
Imap mail accounts cannot be set up to use Global Inbox, but can use the Unified view.
To change Pop mail accounts to use Global Inbox, you would need to move all emails into Local Folders Inbox.
Then change the settings for each pop mail account.
Tools > Account Settings > Server Settings for the pop mail account
click on 'Advanced' button
select 'Inbox for a different account' and 'Global Inbox (Local Folders)
click on OK
You need to do this for each Pop mail account.
Then close Thunderbird. You must do this before downloading anything otherwise the emails may continue to go to the wrong Inbox.
Wait a few moments for Thunderbird to fully close and then restart Thunderbird.
Please read more info on global inbox here:
* http://kb.mozillazine.org/Global_Inbox

Can't send E-mails using Outlook Express on WRT300N

Similar Messages

Maybe you are looking for