Can't send e-mails using Versamail 4.0.1 form my Palm Centro (unlocked - from ATT - on Rogers network).

Good afternoon. I am using a Palm Centro I just bought (unlocked - from ATT - on Rogers network). All is working great BUT sending e-mails. Versamail is receiving just fine but refuses to send. It puts everything I try to send into the "outbox" and then tries to send only to later tell me that it unable to send. The server I go through is a POP server. It has never given me such an issue before - Any advice!!
Steve 
Post relates to: Centro (Unlocked GSM)
This question was solved.
View Solution.

Hello!
With POP/IMAP email, there are 2 server.  One is incomming to whihc ur ok and the other is outgoing to which that one is not.  Since you are using Rogers for service, use the SMTP server from them to which I do belive is still smtp.rogerswirelessdata.com for the outgoing mail server.
Even though the phone has been unlocked, the phone design is still ATT so the versamail application is probably still using ATT's SMTP by default and you need to make the manual change. 
Message Edited by thetreoguy on 05-12-2009 04:41 PM

Similar Messages

  • Can't send e-mail using Mail.  Entourage works fine with same settings.

    I can't send e-mail using Mail. Using exactly the same settings on Entourage everything works fine.
    Until earlier today (for two days only) I couldn't send either. I was advised to run Keychain Access First Aid which spotted "Item “pop3.freezone.co.uk” is a duplicate; this item's port attribute is not set" and then repaired it (Freezone is the name of my ISP). Now I can send Mail but not receive.
    Even stranger is that until today I could receive Mail on one of my two accounts, while only Mail from one person got through on the other. Now no mail is arriving.
    I tried swapping the plist file for an older version from a backup of my system. That didn't work either.
    I'm tearing my hair out! Any suggestions?

    No.
    I'am sendig email from domain A using SMTP belonging to domain A.
    The emails that's addressis is the same as senders (@grader.ee) are going out. But all others don't.
    If there is wrong outgoing SMTP server even those emails can't send.

  • HT202304 Can't send e-mails using iCloud address on either my iPhone or Macs ?

    Hi guys and gals,
    I can't seem to be able to send e-mails using my iCloud address.
    No idea why that is. I don't get any error message, the e-mails 'get sent' without any fuss or ending in the outbox folder and they simply do not reach their destinations. There doesn't seem to exist any issues with Apple either. Perhaps my e-mails are being blocked, out of the blue (not by my ISP though, I'm having this problem with whatever network I'm connected to or using  internet data on my mobile). ?
    Any help would be appreciated, thanks !

    Hello,
    Is the e-mail account in question a .Mac or .Me account at all?

  • Can't send E-mails using Outlook Express on WRT300N

    Hello, I searched through the forums to find problems similar to mine, but everyone had a different router than mine, plus none of the solutions worked for me.
    I just purchaced and installed my router yesterday. Since the install, I have not been able to send e-mails using Outlook Express, but I do recieve e-mails. I am using the WRT300N Wireless-N Router.
    Trying to get my local news service up and running, and right now, e-mail communication is vital........
    Thanks.
    -Ryan French
    Tampa Bay News Online

    Well of course, but the error message says socket error, which doesn't tell how to fix it. Even the Outlook Express help site doesn't give any suggestions to fix anything, other than "Your internet connection has failed," which is not the problem.
    To the disable firewalls suggestion: I did try disabling my firewalls and all of my virus/ e-mail scan software just to check it out. The thing is, I don't see how my Windows XP Firewall, or anything I've been using could be a problem. Right now, because of the error all my sent e-mails are stuck in the outbox, when I disconnect my router and connect everything back up leaving the router out of the picture, the e-mails are sent out as normal. This problem only occurs with the router connected.
    I also need to stream live audio, and I've heard it's a pain using a wireless router...
    Thanks for the suggestions, hopefully someone will provide the winning suggestion so I don't have to call customer service!

  • Can't send e-mails using shaw

    Hi,
    I am currently using shaw for e-mail. I am able to receive e-mails but not send them.
    My current settings:
    outgoing mail server
    smtp shawmail
    primary server: shawmail (ON)
    Have tried using: shawmail.cg.shawcable.net with no luck. When I try to add it under other servers it does not connect.
    Any suggestions?

    Thanks everyone for all your help. To answer the most recent question, yes, I did change the server to reflect my local... that's the cg (Calgary) part of the shawmail.cg.shawcable.net.
    ANYHOW.... good news. It turns out I have to turn off the SSL for my shaw account. I didn't do this for any other accounts but for some reason it won't send with it on (it's fine on my macbook). Crisis resolved and I am happily sending e-mails.

  • Can't send e-mails using the mail program on older iBook

    My daughter gave me an older iBook running OS 10.4.11 and I can't seem to send emails using the Mail application I can receive email with no problem.  I have changed the ports to recommended 995 or 465 with no results.  The only way I can receive mail is if ports are set to 995. Every other aspect of this iBook works fine.  I just use this iBook on trips and not for heavy use so this is not critical but it would be convenient to be able to send mail.  I have tried everything including duplicating the accounts as they are set up in my iMac.  Any ideas?
    jdb38

    Hello,
    Is the e-mail account in question a .Mac or .Me account at all?

  • Sql Express Edition R2 can we send alert mail

    Hi There,
    We are using SQL 2008 Express edition R2. Can we send alert mail using sql services in SQL 2008 Express edition R2

    Hello,
    Database Mail is not supported in the Express Edition; see
    Features Supported by the Editions of SQL Server 2012
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

    I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
    slpmtns

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • I can't send yahoo mail(SMTP)using a Mac?

    I can't send yahoo mail(SMTP)using a Mac?

    Listen I do not have any problem with the I cloud at all. When its  come to setting up the..... Outgoing
    mail serve (smtp) for yahoo I have tried every thing even I changed any other settings in my email accounts. 
    But doesn't responds.  Just some  one tell me please for yahoo account what should I put  for  Server Name and
    Description ??? I  already tried the  (smtp.yahoo.com)   or even this one. (smtp.mail.yahoo.com)
    I  believe do something wrong here .  Is all of
    this make sense  what I try to tell you ? Im just so confessed
    smtp.mail.yahoo.comI..
    (It wont let me send any emaills)
    Thank you for your response!

  • TS3276 Why can i suddenly not send out mail using mail through my ntlworld account

    Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

    Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

  • Sending e-mail using utl_smtp on oracle 9i

    Hello
    I have problem with sending e-mails using utl_smtp package.
    My code looks like this:
    lv_mail_conn := utl_smtp.open_connection(lv_mailhost_txt);
    utl_smtp.ehlo(lv_mail_conn, lv_mailhost_txt);
    res :=     utl_smtp.command(lv_mail_conn, 'AUTH LOGIN');
    res := utl_smtp.command(lv_mail_conn, <login in base64>);
    res := utl_smtp.command(lv_mail_conn, <password in base64>);
    And I get en error after sending a password to SMTP server.
    Error code: 535, text: 5.7.3 Authentication unsuccessful.
    This happens on oracle 9i.
    I have another server for testing which has oracle 10g installed. This code works fine on oracle 10g but doesn't work on oracle 9i.
    Do you have any ideas what's wrong? I assume that SMTP server (microsoft exchange) work correctlys because I can send e-mail from test server.

    Ok problem solved :)
    Problem was between oracle and MS exchange server. Live server oracle 9i is on linux, and testing server works on windows.
    So the problem was with configuration. Our admins corrected it and now works :). I don't know details.

  • Can not send e-mail in mac os x 10.4.11

    can not send e-mail in mac os x 10.4.11

    non sequitur wrote:
    I'm not sure I know what you mean by 'what settings are you using in the accounts part of mail preferences', but I'll give you as much information as I can in the hopes that some of it is responsive.
    In "preferences" I select "accounts" and there are 3 listed:
    'personal gmail' (IMAP)
    'business gmail' (IMAP)
    'Yahoo' (POP)
    For each of the above, the "Account Information" tab gives:
    description: [username]
    email address: [correctly reflects my address]
    full name: [my name]
    Incoming mail server: imap.gmail.com
    user name: [my username]
    password: [*** - I've re-entered to ensure it is my true password]
    outgoing mail server (SMTP): smtp.gmail.com:username
    Is it all in the same format on the iphone?
    This is the same information for the 2 gmail accounts, with the exception of the usernames differing. If I click "server settings" at the bottom, it reflects the outgoing mail server "smtp.gmail.com" server port 25, my correct user name and password.
    Again, different names for the different accounts, right? And this is the same port etc. as you put into the iphone
    All of the above information matches what I input into my iPhone, and it has worked fine since day 1, so I don't understand the malfunction.
    Open /Applications/Utilities/Console. Make sure console.log and system.log are open (or see the File menu).
    Try to send an email.
    Look for new lines in the log files (it should scroll down automatically so the newest lines are at the end of the log at the bottom of the window). What do you see? (Erase or substitute for any personal info before posting.)
    Do you use any firewall software or have you used third-party software or Terminal to configure the builtin firewall?
    - cfr

  • HT5225 unable to send receive mail using Mail 2.1.3

    Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version.  I didn't think it would affect it.  Someone please help as to how I can rectify the issue!

    Hi,
    Please review the following note:
    Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
    If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
    Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
    Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
    Regards,
    Hussein

  • Can not send be-mail os10.9.4 server offline !!

    can not send be-mail os10.9.4 server offline !!

    Hey there mikeneiris,
    It sounds like you are not able to send any emails because the account is showing as offline. I recommend these steps from the following article to help you get that going again:
    Mail (Mavericks): If a mailbox is offline
    http://support.apple.com/kb/PH14925?viewlocale=en_US
    To take an account online, click the lightning bolt icon. Or choose Mailbox > Online Status > Take [account name] Online, or Mailbox > Take All Accounts Online.
    If you can’t take an account online, make sure you’re connected to the Internet. If a warning icon appears after the account name, click it for more information.
    Use Connection Doctor
    Some mailbox names can appear dimmed if you don’t have permission to access them, such as “public” mailboxes on a server, or if the mail server is unavailable.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

    After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

    Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

Maybe you are looking for