Can't send email on outlook

Have not been able to send email using Outlook for Mac 2011 since yesterday, get the message invalid username or password

NOTE: I can receive emails but I CANNOT SEND.
Error messages are:
https://dl.dropboxusercontent.com/u/110096199/26-09-2013%202-52-45%20PM.jpg
https://dl.dropboxusercontent.com/u/110096199/26-09-2013%202-52-22%20PM.jpg
1) Send test e-mail message: An unknown error occurred, error code: 0x80004005
2) Task '@#@$@@Me.com - Sending' reported error (0x80004005) : 'The operation failed.'

Similar Messages

  • Can't send email from Outlook with parentheses in address

    I can't send email from Outlook 2007 through my WRT400N when Outlook displays the address with parentheses as in this example: Firstname Lastname ([email protected])
    I can send if the address is in this form: Firstname Lastname <[email protected]>
    I have tested with the ISP and nothing gets through the router when the problem occurs. When I bypass the router, both forms of address will send correctly. This problem is perfectly reproducible. My router is brand new, but the problem did not show up for about a week after installation. OS is Win7. Any ideas? Thanks.
    -JimW
    Solved!
    Go to Solution.

    Try to forward the port 443 to 447 on the router.Check this link.

  • Can't Send Email through Outlook using blackberry as a modem

    I am using my blaclberry 8900 as a modem and cannot send emails through outlook. I have called t-mobile and they say that it cannot be done. However I could do it with my Nokia. Any suggestions?

    Outlook folder permissions are Outlook issues, try the Microsoft Outlook Forums.

  • I keep getting the message can,t connect to server, can't get email, can't send email from outlook account on ipad

    I keep getting message cannot connect to server, cannot send email, cannot get email from my outlook account . This has been happening for past 3 days Feb 2014

    Check your internet connection...
    If you are connected but can't access anything, your WiFi must be slow.

  • Can't send emails in outlook

    Hi, today I've just had BT broadband installed at my property. My problem is I can no longer send emails, I can however receive them though.
    I have a sky.com email address and would like to keep it I have tried to rectify this by downloading and using BT desktop help but it tells me I am using an old version of IE and need version 6 or higher even though I'm using vesion 11. Any help re my email settings would be great and apologies if this has been asked before, Nick.
    Solved!
    Go to Solution.

    Uninstall BT Desktop Help. You do not need it on your computer and it can cause problems. Have a search through this forum to see the problems.
    Check your email settings as per this link
    http://bt.custhelp.com/app/answers/detail/a_id/44917/kw/bt%20mail/c/346,6588,6591

  • User can't send email in outlook

    Exchange 2010 user is unable to send email in outlook2010. The send/receive reports not having permission to perform the action (0x80070005). She functions normally on iphone and ipad, and in owa. This is a mailbox that previously functoned.

    Hi Mike,
    Does this issue occur on Online mode or Cached mode?
    I guess on Cached mode only. If it is the case, please try to re-add the user into Outlook or re-create a new profile for testing.
    Feel free to correct me if there is any misunderstanding.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Receive but can't send emails using Outlook Expres...

    Is anyone else experiencing this again ?
    OE leaves my mail in the Outbox and BT Mail will not accept them on a send/receive. Also still experiencing password rejection problems everytime I send/receive. If I cancel instead of trying again. It receives my mail but will not send it.
    Any ideas please ?
    Thanks.............. 
    Spoiler (Highlight to read)

    I suspect you will all ready have done this because you were previously sending emails but it might be worth doing it again in case there has been a glitch in the system.
    Verify the non BT email address. See this link.
    http://bt.custhelp.com/app/answers/detail/a_id/10903/kw/reset%20BT%20Yahoo%20Password/c/346,412,416/...
    I think you also need to ensure that you have ticked the box “My outgoing server (SMTP) requires authentication" - and you need to use "Log on using" and enter the BTinternet email address/password  you've used to verify the Non BT email address.

  • Acrobat 9 can´t send Emails from Outlook 2010 (x64)

    Greetings from Germany:
    I have a big problem with Acrobat Standard 9.4.1 and Outlook 2010 on Windows Server 2008 R2.
    Hope someone can help me with this Problem.
    Systeminfos::
    * Windows Server 2008 R2 x64
    * Acrobat Standard 9.4.1 x32
    * Outlook 2010 x64
    If I want send an Email from Acrobat with "Datei->An Email anhängen" (don´t know the english menü) I got that Error-Massage that my Outlook isn´t the Standard-Email-Programm. But it is - you can see on the Screenshot below.
    Every other Programm hasn´t such Problem with Outlook. mailto: Protocoll is working perfektly.
    Is there anyone who has solved that Problem or has any idea?
    Greetings from Germany
    Mario.M

    Sh**t... OK.. Thank you for that Info.
    Still try to use x32 Version.
    Greetings...

  • Sometimes Can't Send email in Outlook 2011

    I recently bought a new iMac and am running OS X 10.7.4.  Because I had Entourage on my old iMac, and the new iMac/OS wouldn't support it, I bought Outlook for Mac 2011 to import my (many) archived email messages.  However, when I pull up an old email that I imported from Entourage and modify it in any way, Outlook will not send it.  This seems to be especially true when I put new attachments on the email.  I get a popup message saying "Message could not be saved."  When I try again I get a message that says "Message could not be sent" with some gibberish about needing to set up an email account (it is) or put an addressee in the "to," "cc:," or "Bcc:" block (I did).  Any ideas?

    Hi Mike,
    Does this issue occur on Online mode or Cached mode?
    I guess on Cached mode only. If it is the case, please try to re-add the user into Outlook or re-create a new profile for testing.
    Feel free to correct me if there is any misunderstanding.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Can i send email from yahoo thru outlook from firefox?

    can't send email from outlook thru yahoo without upgrade thru yahoo. can i send email from here using outlook thru here or thru my yahoo acct.?

    Hi, if you have created an ePrintCenter account and added your printer to that account you can check its ePrint job history. At least that will give you more visibility to the status of any jobs you send to your printer via the ePrint service. Receiving the "no reply" confirmation message only indicates that the email you sent was received by the ePrint service and is being prepared for printing.
    Here's a link with more information you might find useful ePrint Service Help
    Hope this helps solve your problem
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • FIOS to DSL now I can't send email via port 25 or 587

    I was cruising along fine for a year on FIOS.  Then I moved 2 days ago to a new house with DSL.  I connected my system the same as before.  Viola!  I can not send email via Outlook 2002 on non verizon email acccounts.
    Yes, I have read through the port 25/SMTP issues but nothing has worked.  Online support reset my winsock settings, but did not work.
    XP sp 3
    Outlook 2002
    Non Verizon Email
    Anyone find the solution?
    Thanks in advance!
    Solved!
    Go to Solution.

    Maybe this will help:
    For the sake of example, we are going to pretend that we are setting up your outgoing server with  fictional account  "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The Incoming settings will be what your 3rd party provides.
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the server name should be: outgoing.yahoo.verizon.net
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Can receive but not send emails in Outlook 2010 - error message 0x8DE000006 The operation failed

    I an @outlook.com email in my Outlook 2010 which worked well at first.
    It now come up with the error message - error message 0x8DE000006 The operation failed and on my Sync Issues it has the following note:
    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    19:35:57 Contact Support (with the live link which brought me here)
    Which brought me here......any support would be amazing! Thanks

    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    From this message, it seems that your Outlook.com account is blocked due to some unusual activity. Please first try login to your webmail and check if you can send emails from there. If you can't send email even from webmail, we may try to follow the following
    instructions to unblock your account to resolve the issue:
    http://windows.microsoft.com/en-IN/windows/outlook/account-temporarily-blocked
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

    I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

    Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
    Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
    If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
    In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

  • I have set up a Time Warner email account in Mac Mail but can't send email because the Road Runner SMPT server is "offline." How can this be resolved?   ecause the Road Runner SMPT server is offline. How can I resolve this problem?

    I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved? 

    Is this any help?
    http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • Cannot send emails via outlook 2011

    I have an iMac and I cannot send emails via outlook 2011. I get an error code 3210. Can anyone help?

    Does not help.. my problem is a little different
    I have an iMac and I cannot send emails via outlook 2011. I have 3 emails stuck in the sent box... They are not in my sent or inbox. Every time I send an email it first tries to send these 3 mails. for 2 I get an error code 3210 and for one "5.1.2 or other punctuation after the recipient's email address. g5sm23942864eem.4". I have an euronet account and not a hotmail account.

Maybe you are looking for

  • System Image Backup fails in Surface Pro Win 8.1 with an error

    I'm trying to create a system image backup by using "System Image Backup" tool that comes with Windows 8.1 without any success. For this I went to "File History" tool and under this at the bottom-left hand side there is a link "System Image Backup".

  • The 'Dynamic Text' option isn't showing up for me in Flash CS5?

    I'm trying to change the properties of a textbox, and only TLF Text and Classic Text is showing up :/

  • 24" Imac Slow Internet ****

    I am in the DFW area using Verizon Fios - I have a D-Link DIR-655 router and a 24" Imac running Mac OS X 10.5.1. I purchased the Apple Airport router thinking the problem with internet speed might be my router. This was not the case - every computer

  • DES Alg problme

    hi i am trying to run small Piece of Code my code is private static String algorithm = "DES";      private static Key key = null;      private static Cipher cipher = null;      private static void setUp() throws Exception {        key = KeyGenerator.

  • Profit center wise trial balance

    Hi, I have created profit centers for 2 dimensions. and made JE's.  I want to see Profit center wise trial balance for the 2 dimensions When I go to trial balance I went to extended selection criteria and given 2 dimension. But none of the values is