Can't send email to an external address that previously was a local address
Hello,
I have an Exchange 2010 SP3 with several email accounts classified in domains and each doman in its database. Recently we delete one database and all email account from one domain (for example testmail.com). Now, this domain works outside our organisation,
they can send mail to us but when we send mail to them, the email stays in our server queue with this error message:
"the recipient's mailbox has no
mailbox database"
The queue's name is "domain is not reachable".
I think that our server is still trying to send the emails to testmail.com inside our Exchange server instead of looking outside. The DNS resolutions works correctly and there is nothing relatively to testmail.com in our server now.
I have not touched anything using adsiedit, first of all, I want to know if I have to do something using EMC or powershell.
Thank you very much
Hi Albert,
Didn't you forget to remove/change status of the evicted domain from your Accepted Domains list?
"Organization Configuration - Hub Transport - Accepted Domains" should list only domains that your Exchange is directly related to. Here are the configuration tips:
https://technet.microsoft.com/en-us/library/bb124423%28v=exchg.141%29.aspx
▲ Vote if Helpful / Mark if Answer
MCSE: Messaging 2013 Charter / Private Cloud / Server Infrastructure
MaximumExchange.ru
Similar Messages
-
HT4863 I can't send email. I get message that I exceeded my sending limit. What do I do?
I can't send email. I get message that I have exceeded my sending limit. What do I do?
Here is the reply from verizon: this issue is due to temporary outage from Verizon's end.
We have already escalated this matter to our experts and they are working on it.
We apologize for the inconvenience; However HSI services in your area are down and not working. We have temporary technical issues. Please do not worry and do not make any changes in your setup, it is down for almost every HSI connection in your area. -
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message:
The certificate for this server is invalid.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
But on another machine running Mavericks, I can still continue to send email. The same is try from my iPhone 5S.
On that machine running Mavericks the SMTP is configured as SSL and for "Usual Ports" (25, 465, 587) but THIS OPTION IS MISSING ON THE NEW VERSION. On the new version I have tried configuring the port to 25 and then 465 and 587 with no success. I have used the Network Utility to see if my provider is blocking me -- it is not. I have no third-party software on this machine (anti virus). I can receive email fine. On the new Yosemitie Mail there are new checkbox options of Automatically check my settings and Allow unsecure connections. I tried to uncheck SSL for SMTP but then it says it cannot send securely my passowrd and i need to check the option "Allow to send unsecurely". I did that but the same error message keeps appearing. So I have tried nearly everything I have been able to, all to no avail. Please can somebody help?Thanks for your reply. Yes, it is a POP account. Incoming mail is fine. My port for incoming is also 110. But the outgoing port should be 587 (or 24, 465 and 587 as on Mavericks' "Usual Ports" option). I am using the same configuration across three different devices and only the machine running Yosemite is having issues. I notice in the new version of Mail there is no longer the "Usual Ports" option. I am not sure this is the culprit or not. But the fact is no matter how I configure it, it will not send mail for these particular servers. I have multiple clients and only one is affected, meaning I can send email from other email addresses (different hosting contracts) on Yosemite but on this one particular one I cannot.
-
Using a wi fi not mine can't send email error message says my email address not recognised
I am using my IPAD in UK. (friend's wi fi) from Australia
Can receive email ok
Have entered his Outgoing address mail.btinternet.com.
Can't send emails. Error message says server does not recognize my address
What do I do??Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
Any other help anyone?
Nick -
New MacBook- Can't send email. I've changed ports and still the same thing
Hello. I just got my MacBook and I can receive email fine, but I can't send emails. I read the forums and was advised to change my port from 25 to 587 or 143. I'm not sure how someone determines what port I'm suppose to be using? The error I receive is that port 587 or 143 has timed out.
Please help. Thank you.how are you connected to the internet? try going straight into your modem, could be a port issue on a router
does your smtp server need authentication? does it use ssl?
port 587 usually does work if 25 doesn't but those are the 2 main ports used, if neither works verify what port your ISP is using -
How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it. -
I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?
Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Can't send email from Outlook with parentheses in address
I can't send email from Outlook 2007 through my WRT400N when Outlook displays the address with parentheses as in this example: Firstname Lastname ([email protected])
I can send if the address is in this form: Firstname Lastname <[email protected]>
I have tested with the ISP and nothing gets through the router when the problem occurs. When I bypass the router, both forms of address will send correctly. This problem is perfectly reproducible. My router is brand new, but the problem did not show up for about a week after installation. OS is Win7. Any ideas? Thanks.
-JimW
Solved!
Go to Solution.Try to forward the port 443 to 447 on the router.Check this link.
-
Can't send email from internal server, same domain name as external.
We have a domain "example.com", hosted externally, for email and a website. We are thinking of hosting email 'inhouse' and have setup a dedicated subdomain on a 'fixed' IP, "mini.example.com" for AFP services mainly. mini.example.com provides DNS internally, its primary zone is also example.com. All access to the external web goes thru' a modem/router that the server is connected to. We have to set an A record for www access to our website.
In our testing to migrate email, the internal setup works fine, until the switch over. Now we can receive mail to the mini server, but can't send any out.
We instructed our webhost provider to set the CNAME mail.example.com to point to mini.example.com and created a cPanel MX extry mail.example.com, 10 priority. Previously, the external host had CNAME as mail.example.com to example.com and MX as example.com, 10 priority.
Since the implementation of the CNAME change, we can't send emails out and they get stuck at the outbox waiting. Client Mail app, says to check for port and SSL and account settings.
Any idea where we went wrong here and what we can do to get emails out? We could go to each computer and point-off the DNS to office IP, but we rather not.
Thanks!Thank you Camelot and MrHoffman for your replies.
I got in this am to find Mail.app could actually send out emails and I'm stratching my head wondering what happened yesterday.
SMTP server addresss was manually set to mail.example.com for all accounts. In trying to get things to work, the mail setup was redone again by "Accounts", in Systems Preferences, when Login is clicked on, and mail was automatically given a SMTP as mini.example.com instead of mail.example.com. I'm guessing that that could be where the initial 'inside' problems were, given that it had a 0 answer to the MX query. Or then again I wasn't patient enough.
Just for completeness, and if there's something to learn from here, these are the dig results for example.com as seen from within the office network.
============================
~ dig mx mini.example.com :
; <<>> DiG 9.6-ESV-R4-P3 <<>> mx mini.example.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1791
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;mini.example.com. IN MX
;; AUTHORITY SECTION:
example.com. 10800 IN SOA mini.example.com. dnsadmin.example.com.example.com. 2011120603 86400 3600 604800 345600
============================
~ dig mx mail.example.com :
; <<>> DiG 9.6-ESV-R4-P3 <<>> mx mail.example.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 36128
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;mail.example.com. IN MX
;; ANSWER SECTION:
mail.example.com. 10800 IN CNAME mini.example.com.
============================
~ dig mail.example.com :
; <<>> DiG 9.6-ESV-R4-P3 <<>> mail.example.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35095
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;mail.example.com. IN A
;; ANSWER SECTION:
mail.example.com. 10800 IN CNAME mini.example.com.
mini.example.com. 10800 IN A 10.0.0.34
;; AUTHORITY SECTION:
example.com. 10800 IN NS mini.example.com.
============================
~ dig mx example.com :
; <<>> DiG 9.6-ESV-R4-P3 <<>> mx example.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47951
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;example.com. IN MX
;; ANSWER SECTION:
example.com. 10800 IN MX 10 mail.example.com.
;; AUTHORITY SECTION:
example.com. 10800 IN NS mini.example.com.
;; ADDITIONAL SECTION:
mini.example.com. 10800 IN A 10.0.0.34 -
Can I send email using my own domain address with iCloud the way I can with gmail?
Let's say I own mydomain.com and have a [email protected] email account. I have set that up to forward to gmail, and that would be easy to switch to iCloud. Here's the tricky part: gmail allows me to send email as [email protected] I've been doing this for years and it works, but I'd like to switch from gmail to iCloud. Can I set up this same behavior with an iCloud @me.com address (which I already have but haven't been using yet)? I know I can obviously switch the forwarding of incoming mail to my @me.com address... but can I send [email protected] email through iCloud the way I can with gmail? All of my devices are Apple: a Mac Mini using Apple's Mail app, and an iPhone and an iPad both using the Apple email app, so I'd rather switch everything over from gmail to iCloud.
P.S. Awe, c'mon Apple. Don't turn those fake addresses into links. I just used them for the sake of giving an example.Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it. -
How can I send email from my HPEPrint email address
How can I send email from my HPEPrint email address, to other addresses? Is the HP photosmart 5010 smtp compatible?
Hello
The eprint service is only used for incoming emails to the eprint center which then go to your printer, you cannot send out emails from that address.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?
Try here...
Frequently Asked Questions About Apple ID -
Thunderbird can't send email to addresses in Address Book because of formatting error
My Thunderbird can't send email to an address picked from the Address Book. It gives the following error:
"An error occurred while sending mail. The mail server responded: 5.1.1 <"name@telconame"@telco.com> Unknown recipient. Please check the message recipient "name@telconame"@telco.com and try again."
You can see that Thunderbird has garbled the name/address pair: "name@telconame"@telco.com" so that it's unworkable.
If I type the email address by hand, it sends the email OK. But it can't retrieve an address from the Address Book without garbling the name/address pair. Win 7, TBird Version 32.0; it's the same in SafeMode.
Any ideas?Make two Address Book entries for him; one for each of his e-mail addresses. Make a new Address Book group and put both of his entries in it. When you send him an e-mail just type in the name of the group in the To: field.
-
Why I can't send emails to some address and also i...
Hello!
Why I can't send email using my ovi mail account to some email address and also i can't send email using Thunderbird? So what is the problem?
I can't send email to any address using Mozilla Thunderbird. Every time show "Login to server mail.ovi.com failed." but Thunderbird download my ovi account email without any problem. how do i fix this error. I don't know where to post this matter!Yahoo has messed with their stuff lately (honestly they've been messing with their servers for months)
One thing would be if you guys wanted to use the yahoo mail app, or there have been other users posting solutions that they say work for them
https://discussions.apple.com/message/27906475?ac_cid=tw123456#27906475
https://discussions.apple.com/message/27894621?ac_cid=tw123456#27894621
These have applied to people not able to get mail but changing the settings may help you and your wife. (My yahoo is still working so I haven't needed to try any of these)
I've noticed with my Yahoo that they've changed their login protocols. For example 'stay signed in' is always clicked and the push is for people to merge multiple accounts to access their multiple yahoo from one account/sign in instead of signing out/in to access different accounts. I'm wondering if that change is what's messing with the protocols needed for iOS mail to work. But no one really knows for sure (and neither Apple or Yahoo will comment on the issue)
About all users can do is find work arounds that work for them.
If these don't work or if you don't want to use the yahoo mail app, you might try using safari to go to yahoo.com and access your mail that way.
Maybe you are looking for
-
Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.
-
The difference between the HP 61 and 61xl cartridges
I have seen it posted that the page yeild for the regular 61 is about 190 pages and the XL is about 480 pages. I am not sure how many I get with the XL ( I know it is a lot) but the regular never comes even a little close to getting 190 pages, it nev
-
Print from Windows 8.1 rt to HP photosmart c4480
Hi! How can I print from a Windows 8.1 RT tablet to a HP Photosmart C4480? Thanks, PI
-
How do I retrieve files from faulty Hard Drive?
My Hard Drive failed and on advice I bought a new External Hard Drive and installed OSX 10.5.1 from there. However, my faulty Macintosh HD still shows up on my Desktop and I can open it and see files there named Applications, Library, System, Users,
-
I am trying to rearrange the order of my accordion pannels but can't seem to change the stacking order by dragging one panel above the other. Well I should say I can do it but not to the very top ie: panel 3 created but now I want it in the panel 1