Can't Send Exchange Email, No Options for SMTP Username/Password

I haven't been able to send outgoing messages with my iPhone 4 and my work Exchange account. Other people at my office that have iPhones with ATT are able to do it, but I get a message about "Cannot Send Mail" The connection to the outgoing server XXX failed. Additional Outgoing Mail Servers can be configured in Settings > Mail, Contacts, Calendars"
I've looked in the account settings and there isn't anywhere to input SMTP server credentials. Am I just missing it? I see everyone mention it in the forums, but when I go to the Account Info screen, all I see is:
Email ___________
Server___________
Domain___________
Username___________
Password___________
Description___________
Use SSL - ON
There's no section for SMTP. Does anyone have any ideas what my problem might be. Thanks for taking the time to look at this issue.

Based on the information that you supplied, it sounds like your work email needs to be provisioned by your company’s IT department. If this has already been completed, you will need to ensure that you have the $44.99 Corporate Exchange data feature active on your mobile number. This can be confirmed online via "My Verizon. "
For your convenience, I have also included these steps below, just to ensure everything is set up properly:
1 In Settings, tap “Mail, Contacts, Calendars.”
2 Tap Add Account, then tap Microsoft Exchange.
3 Enter your complete email address, domain (optional), user name, password, and a description. The description can be whatever you like.
iPhone supports Microsoft’s Autodiscovery service, which uses your user name and password to determine the address of the Exchange server. If the server’s address can’t be determined, you’re asked to enter it. (Enter the complete address in the Server field.) Once you connect to the Exchange server, you may be prompted to change your passcode to match the policies set on the server.
4 Tap the items you want to use on iPhone (mail, contacts, and calendars) and set how many days of email you want to sync to iPhone.
5. Save. Close
Thanks,

Similar Messages

My N9 can't send a email via using icloud smtp ser...

I follow the guideline from iCloud mail server information to setup email account, but every time i was trying to send an email, a pop-up message show : 'Can't connect to SMTP server :" smtp.mail.me.com" or it doesn't exist '. Everyone can help me to configure out why? Thank you so much!

N9 imap mail sending does not work with .mac/.me (iCloud) mail. I have these settings (automatic and also manually set from Apple page).
Mails stays at outbox with smtp server error (lates N9 update)
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
http://support.apple.com/kb/HT4864

Trying to send photos, email server didn't recognize username/password combo any idea how to fix this

can anyone help me with this problem?

there is a setup wizard
www.apple.com/support/mail
and a forum for OS X versions and Mail
https://discussions.apple.com/community/mac_os?view=discussions

Can i send a email from application without using exchange server?

Hello
I am developing a 3 tier application using EJB, JSP....and i want to incorporate the mail sending facility.
Can i send a email from the application without using exchange server?
plzz help!!!!
Pavan

You will require some kind of SMTP server to be able to send mail from your app (not necessarily M$ exchange.) Just look for mail servers for the platform of your choice.
Vijayan

Can we send bulk email through exchange server 2010

can we send bulk email through exchange server 2010

You can do this however not sure I would recommend that since if people complain they are getting spammed it could effect your production servers domain/IP, i.e. it could get black listed. Personally I always recommend using a different system for
email blast to protect my production IP addresses and also to keep the load off of exchange as well as email marketing systems have built in capabilities for reporting, opt in/out capabilities etc.
All of that said perhaps you can tell us more about what exactly it is you want to do and how often?
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Can ACE send out email alerts for failed probes?

hi guys:
Can ACE send out email alerts to users if the probes failed?
if no, is there any plan to put in this function in the future release?
thanks a lot
i know the work around is to set up the sys-log and configure the sys-log server to send out the mail.

If there are no email alerts when a real server fails the probe and gets put out of rotation, how else will one know that the server is out of rotation.
Is this feature in the GUI ANM software?
John...

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

To add the BCC field to the message window, create a new message, click the 'three lines' button near the to and from fields & select the 'BCC Address field' or choose the 'customise' option. This button may be a 'gear' on the older OS (I don't recall for 10.6.8 Mail).
The BCC field is more likely to be limited by the email server than Mail app. If you add hundreds of addresses (or use large groups with many addresses) the email server may assume you are sending spam. Sometimes it causes the server to drop the message or bounce them, different providers also have different rules, so you need to use bcc & ccc with care.
If you plan on doing mass mailing you would be better with a service that handles it correctly for you (i.e. sends multiple messages without using ccc or bcc).

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4. Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

To: ~graffiti
(This email is not intended to go on public forum -- but I wanted to respond
to you)
Thanks for your reply....FYI...I was trying to download from www.adobe.com on
the specific page that has downloads of your products.    As far as the
alternate source is concerned I am not totally sure what the capabilities it has as
I am recovering from a hospital stay and had to send my wife to retailer to
pick this up because I am accessing email from home until I return to work and
need something to work now. I don't yet have the SW. (I would have had her
buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
Regards,
Staurt Rednor ("Stu") - [email protected]
===========================================================
Subj:   New message: "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader"
Date:   4/5/2009 7:38:17 PM Eastern Daylight Time
From:   [email protected]
Reply-to:   [email protected]
To: [email protected]
Sent from the Internet (Details)
SGuitar43,
A new message was posted in the thread "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader":
http://forums.adobe.com/message/1867664#1867664
Author : ~graffiti
Profile : http://forums.adobe.com/people/~graffiti
Message:

I can't send Comcast emails but I can receive them. What is wrong?

I can't send Comcast emails but i can receive them What is wrong?

Most email providers have two servers for email. There is an incoming mail server and an outgoing mail server. Check your email account on your device to make sure you have entered the correct address for the outgoing mail server. Also check to make sure you have a user name and password entered even if it says its optional. Make sure the user name and password are correct.

Can't send/ reply email

Last week i forward a email to a friend and it appears to have virus and keep resending the same email every 15 minutes. It stops when i power off playbook. It resumes when playbook is power on. It stopped now but since then i cannot send or reply email, they stay in the send/edit mode.anyone has similar experience with the new ver 2.0.0.7971?

I recently purchased Outlook and am using that for Contacts and Calendar, so I shut off Exchange on my phone. The only direct connection on the phone is now GMail. However, I still can't send any email from the phone.
Can anyone help with this?
Thanks.
Harry

Can I send an email with a meeting or flight schedule to ical and have it sync?

can I send an email with a meeting or flight schedule to ical and have it sync?

Hello Fernando,
Yes, you can send mail for success and failure of process chain
1. Select particular node in which you want to get mail.
2.Right click select create message.
3. It will show 3 options for Success , Error, and For both. check what you want.
4. It will ask for Process variants.
5. Select Create variants. It will ask process variants name and Long description.
6. Now it will show maintain recipient List. Select this give emailid of your.
7. Save it.
In Email you will get Data Target name, Process Chain name and request no. and description for error message .
Mail will be like this(this mail is for process chain when it has failed)u2014
Process Activate XXXXXXXX Of Type Activate ODS Object Data Has
Status Ended with errors (Process Chain YYYYYYYYYY)
Log for This Process:                                                                                Request REQU_4GO3ZZZZZZZZZZZZZZZ in ODS XXXXXXXX must have
QM status green before it
                                                                                Activation of data records from ODS object XXXXXXXX
terminated
Log of Respective Background Job:
Job started
                                                                                Step 001 started (program RSPROCESS, variant &0000000276751,
user ID WWWWW)
Request REQU_4GO3ZZZZZZZZZZZZZZZ in ODS XXXXXXXX must have QM
status green before it is activated Activation of data records
from ODS object XXXXXXXX terminated
Request REQU_4GO3ZZZZZZZZZZZZZZZin ODS XXXXXXXX must have QM
status green before it is activated Activation of data records
from ODS object XXXXXXXX terminated.
Thanks
Abha

How can I send an email to a group from my iPhone?

I want to send an email to a group in my contacts, but when I select the group, the individuals display for selection. How can I send an email by addressing it to the group?

I recently upgraded my wife's computer to mountain lion so we could sync it with her iPhone, allowing her to send emails to the groups she manages whether she's at home or on the road.
Is it really the case that the iPhone is incapable of this? The mac does it fine and the iPhone goes through the motions but then bails when you hit send, saying it isn't a valid address.
This really makes no sense. Isn't this the whole point of iCloud?

How can I send an email from Sharepoint Online using sandbox solution?

How can I send an email from Sharepoint Online using sandbox solution?
If possible I do not want to use workflow.
Is It possible to do it without using workflow?

hello Steven Andrews,
when any user sends a message using contact us page in SharePoint online.
1. We are inserting item in Contact Us List . - This is working fine
for anonymous users also. We have used Office365 anonymous codeplex wsp and it is working fine. Anonymous user is able to insert new record in the Contact Us List.
2. Once, new record is inserted in Contact Us list, we want to fire email notifying thanks to the user on his email id as well as to our company x person for notification of new inquiry.
We tried using Workflow having impersonation step for anonymous user but it is not working for Anonymous users. Workflow is able to sent the email if someone logged into system but not working for Anonymous user although workflow is getting started
but not able to send email although used Imperonsation step.
We are stuck into implementing second step.

How do I open a document sent to me via EchoSign. Can I disable it as an option for forms sent out?

I created a form in LiveCycle and saved as an PDF. 75% of respondents filled out the PDF, saved it, and returned it as an attachment. The ones returned via EchoSign are ALL BLANK. Can I disable it as an option for forms I send out?

Correct, you'll need to move it to your itunes library and then sync it to your phone.

Need to send external email with attachment for workflow 20000075

Hello Everyone,
I am new to W/F, I Need to send external email with attachment for PO Release W/F 20000075. Currently Work item is being sent to SAP inbox of required user based on PO Release strategy configuration in SPRO. I tried to create Send mail step after PO release event but I am not sure how to arrive at Recipient type in send mail step(the mail should be sent to person in the release strategy). Everything looks fine all I need to do is to send external email with attachment instead of sending work item into SAP inbox.
Your help will be highly appreciated.
Thanks.

You can use extended notifications to send an e-mail message with a link to the workitem. Search for extended notifications in SDN.
Regards,
Martin

Can't Send Exchange Email, No Options for SMTP Username/Password

Similar Messages

Maybe you are looking for