Can't Send FAX / FAX not working

Dear Techies,
I am facing a horrible problem in sending FAX. In our company, our directors are using MAC Book Air & Mac Book. I have a MAC Book too (i am a newbie to MAC), which they had given me for testing purpose, so that i should clear all their problems in MAC. so its actually a tough thing...
Now, they are not able to send FAX from these machines. They asked me to provide them the solution, and i tried in and out in my MAC Book, But no way... I googled a lot, i found many of the discussions based on this issue, but i didnt saw any working solution for it. Now its the 3rd day for me to sit with this issue. Hope someone will be here to help me. Let me give you the details...
Hardware: MAC book and Mac Book Air
OS: MAC OS X Version 10.4.10
CPU: 2.16 Ghz Intel Core Duo
Mem: 2 GB 667Mhz DDR2
MODEM: External Apple USB modem
Scenario 1:
I tried sending the fax from safari (File--> Print--> Fax PDF), then specified our internal FAX number, also Dialing prefix as 9(bcoz i am behind a EPABX, so 9 to get dial tone)
To: 63452743 (Fax number, not original)
Dialing Prefix: 9
Dialing: Tone (selected)
Sound: on (selected)
Wait for dial tone before dialing: selected
then i clicked "FAX"
but the result was; FAILURE...
Result 1:
It will dial, and stands like connected, while showing a progress bar "Faxing" in the external modem window. after around 3 minutes, it stops... and shows the following message in the external modem window;
"hold until 05:01 p.m."
again it will try at that specified time, and the result is same.
Scenario2:
I tried with fax command;
fax send 9-66728437 test-file.001
and i tried
fax send 966728437 test-file.001
Result2:
It will also do the same like above and finally gives up, and then it will write a log as the following;
command;
abcs-computer:~ kmr$ sudo fax send 9-66766766 test-file.001
Password:
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 17:03:17 2008 opened /dev/cu.usbmodem
efax: 03:18 using Motorola SM56 USB 1.5.6 in class 1
efax: 03:19 dialing T9-667667667
efax: 05:19 Error: dial command failed
efax: 05:19 failed -> test-file.001
efax: 05:19 done, returning 2 (unrecoverable error)
There were errors (see T9-667667667.log).
abcs-computer:~ kmr$
Log;
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 17:03:15 2008 TIFF version 4.2 file (little-endian)
efax: 03:15 TIFF directory at 8 with 17 tags, last image.
efax: 03:15 page 1 : test-file.001 + 234 : 1728x2156 @ 204x196 dpi TIFF/FAX
efax: 03:15 argv[0]=efax
efax: 03:15 argv[1]=-v
efax: 03:15 argv[2]=ewin
efax: 03:15 argv[3]=-v
efax: 03:15 argv[4]=chewmainrxtf
efax: 03:15 argv[5]=-d/dev/cu.usbmodem
efax: 03:15 argv[6]=-iZ
efax: 03:15 argv[7]=-i&FE0&D2S7=120
efax: 03:15 argv[8]=-i&C0
efax: 03:15 argv[9]=-iM1L0
efax: 03:15 argv[10]=-o1
efax: 03:15 argv[11]=-l
efax: 03:15 argv[12]=495 2322999
efax: 03:15 argv[13]=-kZ
efax: 03:15 argv[14]=-h
efax: 03:15 argv[15]=2008/08/12 17:03 495 2322999 Put Your Name Here p. %d/%d
efax: 03:15 argv[16]=-t
efax: 03:15 argv[17]=T9-667667667
efax: 03:15 argv[18]=test-file.001
efax: 03:17 opened /dev/cu.usbmodem
efax: 03:17 command "Q0V1"
efax: 03:17 waiting 2.0 s
efax: 03:17 .170 [ATQ0V1<CR><CR><LF>]
efax: 03:17 .401 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:17 command "Z"
efax: 03:17 waiting 5.0 s
efax: 03:17 .501 [ATZ<CR><CR><LF>]
efax: 03:17 .577 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:17 command "&FE0&D2S7=120"
efax: 03:17 waiting 5.0 s
efax: 03:17 .677 [AT&FE0&D2S7=120<CR><CR><LF>]
efax: 03:17 .903 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:18 command "&C0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .078 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "M1L0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .304 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "E0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .505 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "I3"
efax: 03:18 waiting 5.0 s
efax: 03:18 .630 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 03:18 .655 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "+FCLASS=1"
efax: 03:18 waiting 5.0 s
efax: 03:18 .850 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 using Motorola SM56 USB 1.5.6 in class 1
efax: 03:18 command "+FTM=?"
efax: 03:18 waiting 5.0 s
efax: 03:18 .975 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 03:19 .000 [<CR><LF>OK<CR><LF>]
efax: 03:19 response "OK"
efax: 03:19 command "+FAR=1"
efax: 03:19 waiting 5.0 s
efax: 03:19 .126 [<CR><LF>ERROR<CR><LF>]
efax: 03:19 response "ERROR"
efax: 03:19 dialing T9-667667667
efax: 03:19 command "DT9-667667667"
efax: 03:19 waiting 120.0 s
efax: 05:19 Error: dial command failed
efax: 05:19 failed -> test-file.001
efax: 05:19 command "Q0V1"
efax: 05:19 waiting 2.0 s
efax: 05:19 .325 [<CR><LF>OK<CR><LF>]
efax: 05:19 response "OK"
efax: 05:19 command "Z"
efax: 05:19 waiting 5.0 s
efax: 05:19 .500 [<CR><LF>OK<CR><LF>]
efax: 05:19 response "OK"
efax: 05:19 done, returning 2 (unrecoverable error)
==========
Scenario 3:
i tried sending the Fax with efax command too;
efax -d /dev/cu.usbmodem -o a -v ewincm -t T9667667667 ts-fax.001
The result is same too...
command and log on the screen;
abcs-computer:~ kmr$ efax -d /dev/cu.usbmodem -o a -v ewincm -t T9667667667 ts-fax.001
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 13:38:44 2008 Warning: bind returned error 13 - Permission denied
efax: 38:44 opened /dev/cu.usbmodem
efax: 38:44 command "Q0V1"
efax: 38:44 waiting 2.0 s
efax: 38:44 .482 [ATQ0V1<CR><CR><LF>]
efax: 38:44 .714 [OK<CR><LF>]
efax: 38:44 response "OK"
efax: 38:44 command "E0"
efax: 38:44 waiting 5.0 s
efax: 38:44 .840 [ATE0<CR><CR><LF>]
efax: 38:44 .915 [OK<CR><LF>]
efax: 38:44 response "OK"
efax: 38:45 command "I3"
efax: 38:45 waiting 5.0 s
efax: 38:45 .066 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 38:45 .091 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FCLASS=?"
efax: 38:45 waiting 5.0 s
efax: 38:45 .241 [<CR><LF>0,1,8<CR><LF>]
efax: 38:45 .266 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FCLASS=1"
efax: 38:45 waiting 5.0 s
efax: 38:45 .467 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 using Motorola SM56 USB 1.5.6 in class 1
efax: 38:45 command "+FTM=?"
efax: 38:45 waiting 5.0 s
efax: 38:45 .618 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 38:45 .643 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FAR=1"
efax: 38:45 waiting 5.0 s
efax: 38:45 .793 [<CR><LF>ERROR<CR><LF>]
efax: 38:45 response "ERROR"
efax: 38:45 dialing T6666666
efax: 38:45 command "DT6666666"
efax: 38:45 waiting 120.0 s
efax: 40:45 .017 [<CR><LF>NO CARRIER<CR><LF>]
efax: 40:45 response "NO CARRIER"
efax: 40:45 Error: dial command failed
efax: 40:45 failed -> ts-fax.001
efax: 40:45 command "Q0V1"
efax: 40:45 waiting 2.0 s
efax: 40:45 .262 [<CR><LF>OK<CR><LF>]
efax: 40:45 response "OK"
efax: 40:45 command "H"
efax: 40:45 waiting 5.0 s
efax: 40:45 .413 [<CR><LF>OK<CR><LF>]
efax: 40:45 response "OK"
efax: 40:45 done, returning 2 (unrecoverable error)
abcs-computer:~ kmr$
And also one more information from /var/log/cups/error.log
I [12/Aug/2008:17:01:24 +0300] Started filter
/usr/libexec/cups/filter/cgpdftoraster (PID 275) for job 12.
I [12/Aug/2008:17:01:24 +0300] Started filter
/usr/libexec/cups/filter/rastertotiff (PID 276) for job 12.
I [12/Aug/2008:17:01:24 +0300] Started backend
/usr/libexec/cups/backend/fax (PID 277) for job 12.
I [12/Aug/2008:17:02:28 +0300] Saving printers.conf...
I [12/Aug/2008:17:02:28 +0300] Printer 'External_Modem' stopped by ''.
E [12/Aug/2008:17:02:28 +0300] PID 277 stopped with status 1!
I [12/Aug/2008:17:02:28 +0300] Hint: Try setting the LogLevel to
"debug" to find out more.
So thats all about all my trials and result.... Please help me to get out of this bad situation...
NOTE: I had changed the original FAX number from this post to different numbers...
Thats all...
Thanks in Advance...
and really awaiting for your valuable comments.

First of all, really thanking you 3 for your posts. i dont need to do a internet faxing. The safari, which i mentioned, in the scenario is an example. My director might need to send FAX from doc files, html files, mails, pdf files etc.
So i need a solution to do the FAX through FAX pdf, which is available through printing.
Then regarding the analog vs digital PBX, here we use analog and digital PBX. But i am trying through the analog line. Still, today i went to the telephone people and asked to give me an direct line to check this out. Then i tried from it.
Fax command and faxing through graphical (fax pdf) gives the same error. But efax command showed a different kind of error message which i will post it here... So i think i will have to work on it... so i requested the telecommunication people to give me an direct line to my table for 2-3 days, so that i could run many test on it... but still i am waiting for their confirmation.
Anyway pls have a look at this message, and put forward ur suggestions.
NOTE: i forgot to notify in the previous post that, the main error point in the log files is "NO CARRIER"
Output of command efax:
abcs-computer:~ root# efax -d /dev/cu.usbmodem -o a -v ewincm -t T7777777 /Users/kmr/test-file.001
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Wed Aug 13 09:25:03 2008 opened /dev/cu.usbmodem
efax: 25:04 command "Q0V1"
efax: 25:04 waiting 2.0 s
efax: 25:04 .097 [ATQ0V1<CR><CR><LF>]
efax: 25:04 .330 [OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "E0"
efax: 25:04 waiting 5.0 s
efax: 25:04 .456 [ATE0<CR><CR><LF>]
efax: 25:04 .531 [OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "I3"
efax: 25:04 waiting 5.0 s
efax: 25:04 .682 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 25:04 .707 [<CR><LF>OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "+FCLASS=?"
efax: 25:04 waiting 5.0 s
efax: 25:04 .857 [<CR><LF>0,1,8<CR><LF>]
efax: 25:04 .882 [<CR><LF>OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "+FCLASS=1"
efax: 25:04 waiting 5.0 s
efax: 25:05 .083 [<CR><LF>OK<CR><LF>]
efax: 25:05 response "OK"
efax: 25:05 using Motorola SM56 USB 1.5.6 in class 1
efax: 25:05 command "+FTM=?"
efax: 25:05 waiting 5.0 s
efax: 25:05 .234 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 25:05 .259 [<CR><LF>OK<CR><LF>]
efax: 25:05 response "OK"
efax: 25:05 command "+FAR=1"
efax: 25:05 waiting 5.0 s
efax: 25:05 .409 [<CR><LF>ERROR<CR><LF>]
efax: 25:05 response "ERROR"
efax: 25:05 dialing T7777777
efax: 25:05 command "DT7777777"
efax: 25:05 waiting 120.0 s
efax: 25:20 .008 [<CR><LF>CONNECT<CR><LF>]
efax: 25:20 response "CONNECT"
efax: 25:20 connected
efax: 25:21 waiting 2.0 s
efax: 25:21 .257 [<CR><LF>OK<CR><LF>]
efax: 25:21 response "OK"
efax: 25:21 received UNKNOWN
efax: 25:21 Warning: bit-reversed HDLC frame, reversing bit order
efax: 25:21 command "+FRH=3"
efax: 25:21 waiting 35.0 s
efax: 25:21 .357 [<CR><LF>CONNECT<CR><LF>]
efax: 25:21 response "CONNECT"
efax: 25:21 waiting 2.0 s
efax: 25:21 .959 [<CR><LF>OK<CR><LF>]
efax: 25:21 response "OK"
efax: 25:21 received CSI - answering ID
efax: 25:21 remote ID -> +000 2 7777777
efax: 25:21 command "+FRH=3"
efax: 25:21 waiting 35.0 s
efax: 25:22 .054 [<CR><LF>CONNECT<CR><LF>]
efax: 25:22 response "CONNECT"
efax: 25:22 waiting 2.0 s
efax: 25:22 .355 [<CR><LF>OK<CR><LF>]
efax: 25:22 response "OK"
efax: 25:22 received DIS - answering capabilities
efax: 25:22 remote has no document(s) to send, and can receive
efax: 25:22 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:22 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:22 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:22 command "+FTH=3"
efax: 25:22 waiting 3.1 s
efax: 25:23 .358 [<CR><LF>CONNECT<CR><LF>]
efax: 25:23 response "CONNECT"
efax: 25:23 sent TSI - caller ID
efax: 25:23 waiting 13.6 s
efax: 25:25 .109 [<CR><LF>CONNECT<CR><LF>]
efax: 25:25 response "CONNECT"
efax: 25:25 sent DCS - session format
efax: 25:25 waiting 13.6 s
efax: 25:25 .479 [<CR><LF>OK<CR><LF>]
efax: 25:25 response "OK"
efax: 25:25 command "+FTM=145"
efax: 25:25 waiting 3.1 s
efax: 25:25 .604 [<CR><LF>CONNECT<CR><LF>]
efax: 25:25 response "CONNECT"
efax: 25:25 Warning: termios.iflag is 000000005, not 000001005
efax: 25:25 Warning: terminal mode not set properly
efax: 25:25 waiting 30.0 s
efax: 25:28 .708 [<CR><LF>OK<CR><LF>]
efax: 25:28 response "OK"
efax: 25:28 sent TCF - channel check of 2700 bytes
efax: 25:28 command "+FRS=1"
efax: 25:28 waiting 3.0 s
efax: 25:28 .783 [<CR><LF>OK<CR><LF>]
efax: 25:28 response "OK"
efax: 25:28 command "+FRH=3"
efax: 25:28 waiting 3.0 s
efax: 25:31 waiting 2.0 s
efax: 25:31 .832 [<CR><LF>OK<CR><LF>]
efax: 25:31 response "OK"
efax: 25:31 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:31 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:31 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:31 command "+FTH=3"
efax: 25:31 waiting 3.1 s
efax: 25:32 .829 [<CR><LF>CONNECT<CR><LF>]
efax: 25:32 response "CONNECT"
efax: 25:32 sent TSI - caller ID
efax: 25:32 waiting 13.6 s
efax: 25:34 .579 [<CR><LF>CONNECT<CR><LF>]
efax: 25:34 response "CONNECT"
efax: 25:34 sent DCS - session format
efax: 25:34 waiting 13.6 s
efax: 25:34 .931 [<CR><LF>OK<CR><LF>]
efax: 25:34 response "OK"
efax: 25:34 command "+FTM=145"
efax: 25:34 waiting 3.1 s
efax: 25:35 .056 [<CR><LF>CONNECT<CR><LF>]
efax: 25:35 response "CONNECT"
efax: 25:35 Warning: termios.iflag is 000000005, not 000001005
efax: 25:35 Warning: terminal mode not set properly
efax: 25:35 waiting 30.0 s
efax: 25:38 .156 [<CR><LF>OK<CR><LF>]
efax: 25:38 response "OK"
efax: 25:38 sent TCF - channel check of 2700 bytes
efax: 25:38 command "+FRS=1"
efax: 25:38 waiting 3.0 s
efax: 25:38 .231 [<CR><LF>OK<CR><LF>]
efax: 25:38 response "OK"
efax: 25:38 command "+FRH=3"
efax: 25:38 waiting 3.0 s
efax: 25:41 waiting 2.0 s
efax: 25:41 .280 [<CR><LF>OK<CR><LF>]
efax: 25:41 response "OK"
efax: 25:41 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:41 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:41 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:41 command "+FTH=3"
efax: 25:41 waiting 3.1 s
efax: 25:42 .283 [<CR><LF>CONNECT<CR><LF>]
efax: 25:42 response "CONNECT"
efax: 25:42 sent TSI - caller ID
efax: 25:42 waiting 13.6 s
efax: 25:44 .034 [<CR><LF>CONNECT<CR><LF>]
efax: 25:44 response "CONNECT"
efax: 25:44 sent DCS - session format
efax: 25:44 waiting 13.6 s
efax: 25:44 .404 [<CR><LF>OK<CR><LF>]
efax: 25:44 response "OK"
efax: 25:44 command "+FTM=145"
efax: 25:44 waiting 3.1 s
efax: 25:44 .529 [<CR><LF>CONNECT<CR><LF>]
efax: 25:44 response "CONNECT"
efax: 25:44 Warning: termios.iflag is 000000005, not 000001005
efax: 25:44 Warning: terminal mode not set properly
efax: 25:44 waiting 30.0 s
efax: 25:47 .635 [<CR><LF>OK<CR><LF>]
efax: 25:47 response "OK"
efax: 25:47 sent TCF - channel check of 2700 bytes
efax: 25:47 command "+FRS=1"
efax: 25:47 waiting 3.0 s
efax: 25:47 .704 [<CR><LF>OK<CR><LF>]
efax: 25:47 response "OK"
efax: 25:47 command "+FRH=3"
efax: 25:47 waiting 3.0 s
efax: 25:50 waiting 2.0 s
efax: 25:50 .754 [<CR><LF>OK<CR><LF>]
efax: 25:50 response "OK"
efax: 25:50 Error: no command/response from remote
efax: 25:50 command "+FTH=3"
efax: 25:50 waiting 3.1 s
efax: 25:51 .757 [<CR><LF>CONNECT<CR><LF>]
efax: 25:51 response "CONNECT"
efax: 25:51 sent DCN - disconnect
efax: 25:51 waiting 13.6 s
efax: 25:52 .033 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 command "H"
efax: 25:52 waiting 5.0 s
efax: 25:52 .259 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 failed -> /Users/kmr/test-file.001
efax: 25:52 command "Q0V1"
efax: 25:52 waiting 2.0 s
efax: 25:52 .504 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 command "H"
efax: 25:52 waiting 5.0 s
efax: 25:52 .655 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 done, returning 3 (invalid modem response)
abcs-computer:~ root#
Thanks in Advance...

Similar Messages

Outbound FAX is not working

Outbound FAX is not working. Below is the Call Flow
FAX ServeràH.323àCUCMàMGCPàGatewayàE1 PRIàPSTN
The CUCM version is 8.0.3 while the gateway IOS version is 12.4(24)T5.
Collected the following
Packet Captures between FAX server and CUCM
CUCM traces
Debugs in PSTN Gateway
Below are the observations
H.225 Setup message is seen in packet captures and CUCM traces. See snippet below
16:53:00.684 |In Message -- H225SetupMsg -- Protocol= H225Protocol|*^*^*
16:53:00.684 |Ie - H225BearerCapabilityIe -- IEData= 04 03 90 90 A5 |*^*^*
16:53:00.685 |Ie - Q931CalledPartyIe -- IEData= 70 09 A1 39 36 33 32 33 39 39 38 |*^*^*
16:53:00.685 |Ie - H225UserUserIe -- IEData= 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
16:53:00.685 |MMan_Id= 0. (iep= 0 dsl= 0 sapi= 0 ces= 0 IpAddr=149815ac IpPort=2043)|*^*^*
16:53:00.685 |IsdnMsgData1= 08 02 5B CA 05 04 03 90 90 A5 70 09 A1 39 36 33 32 33 39 39 38 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
16:53:00.685 |value H323-UserInformation ::= |*^*^*
16:53:00.685 |SPROCRas - {
h323-uu-pdu
    h323-message-body setup :
        protocolIdentifier { 0 0 8 2250 0 5 },
        sourceInfo
          vendor
            vendor
              t35CountryCode 181,
              t35Extension 0,
              manufacturerCode 48
            productId '4469616C6F67696320436F72706F726174 ...'H
          terminal
          mc FALSE,
          undefinedNode FALSE
        destCallSignalAddress ipAddress :
            ip 'AC159805'H,
            port 1720
        activeMC FALSE,
        conferenceID '1415791BC93E021F3F0380B9FE5FAC75'H,
        conferenceGoal create : NULL,
        callType pointToPoint : NULL,
        sourceCallSignalAddress ipAddress :
            ip 'AC159814'H,
            port 2043
        callIdentifier
          guid '2513791BC93E021F3F0380B9FE5FAC75'H
        mediaWaitForConnect FALSE,|*^*^*
16:53:00.686 |
        canOverlapSend FALSE,
        multipleCalls FALSE,
        maintainConnection FALSE,
        presentationIndicator presentationAllowed : NULL,
        screeningIndicator userProvidedVerifiedAndFailed
    nonStandardData
      nonStandardIdentifier h221NonStandard :
          t35CountryCode 181,
          t35Extension 0,
          manufacturerCode 48
      data '4469616C6F67696320436F72706F726174 ...'H
    h245Tunneling FALSE
}|*^*^*
Based on this, the CUCM is doing correct digit analysis and routes the call to MGCP gateway’s endpoint S0/SU0/DS1-0/[email protected]
Gateway sends the ISDN q931 setup message to PSTN for which it does get the Call Proceed and Progress indicators
The gateway is dropping call in Cause Code “0x80AF - Resource unavailable, unspecified”. See Snippet below
016325: *May 2 17:12:47.661: MGCP Packet received from 172.21.152.5:2427--->
CRCX 5493 S0/SU0/DS1-0/[email protected] MGCP 0.1
C: D000000003d354dd000000F500000016
X: 1
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
016383: *May 2 17:12:47.669: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0016
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Calling Party Number i = 0x0083, N/A
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0xA0, '96323998'
                Plan:Unknown, Type:National
016384: *May 2 17:12:47.757: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8016
        Channel ID i = 0xA98381
                Exclusive, Channel 1
016385: *May 2 17:12:47.761: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x8016
        Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have in-band info
016386: *May 2 09:12:48.193: %C3800_ENVM-3-MFAIL_OFF: There is more than one failure with the Power System 1 or this Power System h
as been turned off.
016387: *May 2 17:12:51.669: //494/2E810F7780E1/CCAPI/cc_handle_inter_digit_timer:
   Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
016388: *May 2 17:12:59.773: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x0016
        Cause i = 0x80AF - Resource unavailable, unspecified
From the Fax Utility it shows No answer at Fax Number. Also it rings the remmote fax machine twice (Actually i can hear the ring as the macine is beside me)
Please help me to solve the issue. Except this other functions are working properly. Moreover I can send internal Fax from one user to other.
Thanks and Regards,
Ashfaque.

Just a quick update, as per Cisco TAC the CUCM version 8.0.3 does not support gateway IOS version is 12.4(24)T5 (Later I found its only for conference option). So we upgraded the IOS to 15.1(1)T3. But still having the sam issue.
Thanks,
Ashfaque

Can i send a fax from a hp ts 520?

can i send a fax from a hp ts 520?

Bft, welcome to the forum.
Which of these models is yours?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can I send a fax direct from scanning

I recently bought a HP Photosmart 7510 and have now used up the "Setup" cartridges. I have purchased 4 cartridges and am awaiting the Photo black cartridge.
It would seem that until I replace the cartridge, I cannot get to the home screen. Which means I can't send a fax. I was wondering if there is a way round this?
Colin

Unfortunately, that ink cartridge would have to be replaced in order to get that message to disappear and get the home screen to return.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Switch from Comcast back to AT&T - Now Fax is not working on my HP Officejet J5700 All-in-one

To HP Support:
My home phone was with Comcast. My fax was working fine. I have since switched my home phone to AT&T and now my fax is not working.
Question - what do I need to do to get my fax to work like it did previously?
Please advise and thank you.
Greeneyes4U2

Try first contact AT&T, there might be something they need to do. Nowadays, phone companies provide very different services, on some lines, fax just don't work. Here is an HP support page with some info that might be helpful.http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00302247&cc=us&dlc=en&lc=en
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Can i send a fax with my imac

can I send a fax on my imac ?

Sorry for jumping on your post - looks like we were typing at the same minute.
Gregory, you can check the threads over to the right under More Like This for more details.

HT4865 my message send tab is not working, any idea why please, thanks in advance,

My message tab to send is not working,I can type the message but when I press send it 's not working,
I don't remember doing anything to stop it, Can anyone advise me please, thanks you in advance,

If you have Settings>Messages>Show Subject Field set to On, you may be typing in the subject field of your message. The Send button won't respond until you type something in the iMessage field just below it.

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

Send to is not working when a document library is associated with work flow.

Send to is not working when a document library is associated with work flow.
question is when a workflow is tied to list send to don't work ?
we get a ntlm login prompt sphoradically, if we cancel the prompt we and reload the page we get the resultsen

could you please give more detail about the issue?
What kind of the workflow associated to the Library and what error you getting when trying to perform send to?
check ULS logs...
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Send E-mail not working???

I'm having issues with the "send email" button not working. When I test (F4) the functionality of a quiz inside captivate 5 & 5.5 and get to the end of the quiz I click the send email button and it opens my email with the results in the body of the email like its supposed to...but when I publish the course launch the published html file and then take the quiz when I click the send email button nothing happens (literally nothing). Am I missing something simple? I don't remember this being an issue in previous version...
Thanks for the help
B

Hi there
Please investigate the link below
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

TS4268 My iMessage send button is not working. How do I get it to work?

My iMessage send button is not working. How do I get it to work?

Hi,
You may have a virus on your PC. Review this NBC Nightly news article.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

" send link" is not working , when click on it, nothing happens, but Firefox 4.0 will work

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

How can I Send a fax directly with HP Officejet Pro 8500

Hello
I have a printer of the type
hp officejet 7100 series
When I want to send a fax directly, a text document, for example, type it on the printer
hp officejet 7100 series fax
And converts it to a fax machine directly.
Now I buy a new printer
HP Officejet Pro 8500 A909g Series
I want to do the same work.
But there is no print on the fax.
I had to I do a print of the file manually and then sent through the printer
I want to resolve the issue
Send a fax directly

Just to make sure, this is how the process of faxing from Word is supposed to work, in general terms:
1
Create and save a Word document. You'll need a saved file on your computer before you're able to fax it.
2
In Microsoft Word, you can use the Fax Wizard to fax your Word document if you have Word and an Internet connection capable of doing so.
3
Click "File," then "Send To," then "Fax Recipient." This should open up a Fax Wizard window separate from the window of the document.
4
Follow the onscreen instructions of the Fax Wizard. If your computer is not capable of sending faxes, the Wizard will indicate this.
5
Enter the file, recipients' names and numbers and information from your coversheet. Click "Finish" at the bottom of the window.
6
If your computer is for some reason not capable of using the Microsoft Fax Wizard, you'll need to download a different Internet fax program from the Web.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

FAX button not working on HP Connect site for HP Officejet All-in-One 4630

I can send a fax using the printer, but cannot send a fax from the computer using the HP Connect page. It was working before. I can use fax set up wizard, manage fax settings but not send a fax button. It stopped working all of a sudden. EHW

Hi EHW,
Welcome back to the HP Support Forums! I see you are able to send a fax from the front panel of your HP Officejet 4630, but when you attempt to use the HP Printer Assistant to send a fax the fax option is now greyed out.
I would first like you to make sure the printer's Firmware is up to date, please click on the link below to get started:
HP Officejet 4630 e-All-in-One Printer series Firmware Update
Once you have updated the Firmware, try and open up the HP Printer Assistant, are you now able to choose the Fax option?
If not, continue here and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Are you able to fax from the HP Printer Assistant, if you still have problems leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. Have you made any changes or updates to the computer?
Please let me know the results, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can't Send FAX / FAX not working

Similar Messages

Maybe you are looking for