Can't send, get error message 5.7.1
Here is the complete message:
An error occurred while sending mail. The mail server responded: 5.7.1 [address] Relay access denied. Please check the message recipient [address] and try again
Using Outlook with same server settings, messages go through. If I resend multiple times from Thunderbird the message goes through. If I move the message to draft, and then check the isp's webmail, the message has been received by my isp and is in the proper webmail draft folder. Last night I had the same issues on my home computer (I'm currently at work).
Any help?
The 'Relay access denied' error indicates your email provider is different to your ISP.
Can you post your Troubleshooting Information?<br>
Help - Troubleshooting Information
What is your ISP?
Similar Messages
-
How can i send an error message at EXIT_SAPMM06E_013 ?
Hi
I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N).
I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this exit does not has (receive) the table with Partner Functions so i could validate them.
Then I use the Exit _013, wich executes when saving the PO, because this exit has the captured Partners table (XEKPA).
But, when i make the validations and try to send a error mesage, the system shows other message type info (window) like 'The requested object is locked by another transaction' and then another like 'System error (error in method PO_POST)'.
I think this it's because the exit _013 is better suitable to make customer updates and not validations, that it's because just passing by MESSAGE Ennn(cc) command makes the methods catch my error and send other errors and close the transaction.
Does somebody can help me ??
How can i send error messages in exit _013 ??
Or is this incorrect ??
Or in wich User Exit can i validate the Partner Functions ??
I really will aprettiate if somebody can help me, because i'm delayed with my development !!
RegardsHi Frank,
The eror message you are getting seems to be coming from somewgere else and may be due to the same PO being cahnged in another transaction or have you put some code in BADI ME_PROCESS_PO ( Method POST) .
You can try by commenting out the code in EXIT 13 .
If this does not work then use EXIT 12 only and below is the code you can use to access XEKPA in exit 12.
DATA IT_EKPA LIKE EKPA OCCURS 0 WITH HEADER LINE.
DATA NAME(50) VALUE '(SAPLMEPO)XEKPA[]'.
DATA NAME1(50) VALUE '(SAPMM06E)XEKPA[]'.
FIELD-SYMBOLS <F1> TYPE ANY .
IF SY-TCODE+4(1) = 'N'.
ASSIGN (NAME) TO <F1>.
ELSE.
ASSIGN (NAME1) TO <F1>.
ENDIF.
IT_EKPA[] = <F1>.
( Now you have the data in IT_EKPA table which you can use to validate )
Cheers -
Can't install, get error message that says "The website declined to show this page"
I've been using Firefox for years now, but recently I had some problems with my computer and had to re-install Windows. I am now running Windows 8.1. I can't install Firefox now. It's very strange. When I attempt to install, I get an error message that says, "The website declined to show this webpage". It says the most likely cause is that the website requires you to log in. I have never experienced this issue before and like I said, I've been using Firefox for years. My anti-virus software found that the installation is accessing a web resource called DynamicOfferScreen, so I think the installation is corrupt. Can someone send me a link to download a clean installation?
You might have loaded an unofficial bundle advertised as a Firefox download...
Please start with the Windows Control Panel, Uninstall a Program. (Use the charms bar search box if necessary to find it.) Click the "Installed on" column heading to group by date and reveal what bundled items may have snuck in. Remove everything you do not know to be legit and valuable.
Next, in Firefox, review your extension and disable/remove anything unrecognized or questionable. if in doubt, disable. You can do that on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions.
Finally, after clearing those out, mop up with some of the scanning/cleaning programs listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
Back to normal? -
Using a wi fi not mine can't send email error message says my email address not recognised
I am using my IPAD in UK. (friend's wi fi) from Australia
Can receive email ok
Have entered his Outgoing address mail.btinternet.com.
Can't send emails. Error message says server does not recognize my address
What do I do??Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
Any other help anyone?
Nick -
error message reads "size of message exceeds temporary size limit of server"; The message is 1 word long so that's obviously not the problem;
I upgraded automatically to the latest version on 7-16-14 and that's when the problem startedThe size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Your message has too many recipients. For more information regarding
4.5.3 Google's sending limits, please visit:
4.5.3 http://support.google.com/mail/bin/answer.py?answer=22839 u5sm10938190obv.10 - gsmtp.
I get this message when attempting to send a message to my distribution list. Problem started today. Single recepients work okay. -
I am using Outlook for Mac on my MacBook Pro. All was working well until I upgraded to OS X Mountain Lion (10.8.2). Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK. What can I do to resume reception of all of my email?
I am using Outlook for Mac on my MacBook Pro. All was working well until I upgraded to OS X Mountain Lion (10.8.2). Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK. What can I do to resume reception of all of my email?
-
Safari 4.0.4 & PhP 4 "Can't send header" error message
Everyone...
I am currently recoding many of our PhP templates & HTML to better conform to the newer browsers (IE 8, FF 3.6, Opera 10, Safari 4.0.4 and AOL 9) and cannot resolve the issue with the Safari browser...
Essentially, when going from one module to another (requiring a redirect header statement) the Safari 4.0.4 ALWAYS rejects the request with the "Cannot send header" error.
I recoded some of the Php code so it will not work in IE 7/8, Opera 10, FireFox 3.6, AOL 9.... Yet Safari 4.0.4 just does not want to work..
Does anyone have any suggestions? I am aware that when sending a new header (via redirect) that NOTHING can be posted to the browser ahead of the header request (ie: space, html command, etc...).
Thanks!Thanks, as far as I know, there isn't one. Any other suggestions? I just uninstalled Thunderbird and deleted all saved settings and re-installed. Still not working.
thanks! -
When I try to install I receive this message:
"Firefox has stopped working
A problem caused the program to stop working correctly. Windows will clsoe the program and notify you if a solution is available."
This happens when I select RUN to install Firefox 9.0.1
I removed the old version because it was crashing everytime I tried to use it and it wouldn't let me update with the new.
I HATE IE, and need my Firefox back --- I am dead in the water for work without it.Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I get error message "The message can't be sent right now. Please try again later."
I use the information protected by the Do Not forward template and I get error message "The message can't be sent right now. Please try again later."
My Details :
AD RMS Windows 2012 R2
Exchange 2013 CU3
I can't see any errors in the application event viewer
Help me please.Hi
I would recommend you to run Test-IRMConfiguration -Sender [email protected] and see the results as well.
Grant access to Exchange servers to use ADRMS for IRM. Perform the following task.
Open IIS on ADRMS server – open default Website – Click _wmcs – Select Certification
Switch to content view – right click on servercertification.asmx and click edit permissions ensure that Exchange servers are listed. If not add the exchange servers and the ADRMS managed account and grant editor access to them.
Also refer below
AD RMS: Test-IRMConfiguration Command Fails with UnsupportedCryptographicSetException
http://social.technet.microsoft.com/wiki/contents/articles/16449.ad-rms-test-irmconfiguration-command-fails-with-unsupportedcryptographicsetexception.aspx
Check if the certifications are set correctly - Set Permissions on the AD RMS Server Certification Pipeline
http://technet.microsoft.com/en-us/library/ee849850(WS.10).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
I am trying to restore factory setting on my old iphone 4 so i can send it back to my wireless company for the trade in program. I keep getting error message from apple 3014. I have tried all troubleshooting tips and still get the error message. Does anyone have any tips? Thank you
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?
Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport -
I can't update itunes. I get error message can't find "itunes.msi". What can I do?
What can I do to download updated itunes. I get error message can't locate "itunes.msi." folder.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
Getting error message can't open unistalled product
Cant open itunes ... getting error message can't open uninstalled product.... can't uninstall.. help
Doublechecking before proceeding. Is that a "This action is only valid for products that are currently installed" error message?
Maybe you are looking for
-
Dear All, In download scheduler I schedule the report, I need to download the reports as on date on daily basis. How can I specify date criteria as current date while scheduling the report. Is there any other way I can schedule and download the repor
-
On a Mac Book pro - running 10.6.8 Firefox was fine until the last couple of updates that happened without my consent (?). Suddenly there were weird errors and crashes of Flash and slow loading pages. Now it's gone into rubbish mode where the beach b
-
Simplify the select query to get single record
Please let me know what is wrong with my query. Max(p_received_date) is returning null columns too. But i need to have only null record per period, if there is date and null record for the same billing then return the date record. please check novemb
-
I've got these headphones from Tritton that I cannot figure out how to get the microphone to work on. I've got them connected to my mac pro via the optical port but the mac doesn't seem to realize that the mic is there. Anyone have any ideas how to g
-
When I am on youtube and watch videos, I notise that everytime i start watching the video, it lags and jumps in the video, and it always starts around 0:10-0:14 sec in the video. Does antone els have this problem, and what should i do???