Can't send image to Photoshop.

Hi, All.
I have done this successfully before in Lightroom 3 but it is not working in Lightroom 4.
As I work on some of my images in Lightroom there are some I have tried to edit in Photoshop but the images won't open. I am running Photoshop CS6. As I right click on an image and click on edit in Photohosp the application will open (Photoshop CS6, that is) but the image won't.
Just another piece of information that may be helpful. I also work with NIK Software's Viveza 2 as another external editor and this one works just fine. I can click on an image, select Viveza 2 as the external editor and the image will open in that application without any problem.
Is there something I am doing wrong or something that has changed in version 4?
Any ideas as to why this is happening?
TIA.

I had this problem on windows. You must run Lightroom as administrator - even if the account you are in has administrator priviliges.
Test if this is the problem you are having  by opening lightroom in administrator mode:
Open Windows explorer and navigate to where the lightroom.exe file is located.
Usualy in  C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4
Right click on lightroom.exe and select "Run as administrator" from the pop up menu.
Test by selecting a photo and selecting the "Edit in Adobe photoshop CS6" option.
If this works then close lightroom and go back to the "lightroom.exe" folder location,
rightclick on the lightroom.exe file but select "properties", then select the "compatibility" tab and
select "change settings for all users" button.
A box called  compatibility for all users should appear, at the bottom there is a checkbox "privilige level"
make sure the "run this program as administrator is checked".
Close lightroom and reopen it.
My Lightroom was opening .jpg and .tiff fine in photoshop but not RAW ( Nikon .nef in my case) files.
Also was opening multiple images fine in an external editor( Microsoft ICE).
Hope this helps.

Similar Messages

  • Aperture 3 - Can't send images to Photoshop CS3

    When ever I try to edit images within Aperture 3 using photoshop CS3 I get the following message: *Editing Error This image cannot be rendered for editing because Aperture does not support the image format.*
    So far I have updated Aperture to 3.0.1, I have tried 32 and 64 bit, I have tried Tiff and PSD - 8 and 16 bit. Reinstalled Aperture and Photoshop, repaired and rebuild the database, but I still get the Editing Error.
    The images are JPEG's and Raws, which have been imported from Aperture 2.
    Thanks for your time. Please Help......

    Curious. I have no problem whatsoever when in Aperture I choose to use Photoshop CS3 as an external editor.
    Works without issue.
    Am not sure what you may be encountering, but be assured that it does work fine for me.
    So, don't give up.

  • Can i send images by email as attachments rather than embedded in email

    can i send images by email as attachments rather than embedded in email

    How the email message looks in Mail is fairly irrelevant to how it will look to the recipient.  An image attached to an email message is an attachment regardless of how the client displays it.  Some will display it inline, others as an icon in a list of attached files.  Regardless, it is an attachment and should be capable of being opened, saved to another location, etc.
    Unfortunately, some Windows email clients (*cough* Outlook *cough*) are absolutely crippled when it comes to email standards, and make it difficult for recipients to view or save some attached images.  You can better ensure success with Outlook by using Windows-friendly attachments and only sending plain text email, rather than HTML email.  However, Outlook is still Outlook, and it does not play well with others.
    If you must communicate with people who use Outlook  try uploading your photos to an album on Picasa, Flikr, Shutterfly, etc, and then send people a link instead.  Or convince them to use a real email client, like Thunderbird.

  • Send image to Photoshop

    Is it possible to use PhotoshopSDK in my application to have a one button click to send the output images from my program to Adobe Photoshop ? I can save the images as jpg, BMP, TIFF.
    Also, is it possible to have my application open from Photoshop ?

    Listener plugins are your best friend here. Just as Chris has suggested, start with using scripting only: copy $PS\Scripting\Utilities\ScriptListener.8li into your plugins folder, run PS and try manually performing the operations you'd like to automate (i.e. open a PSD, open a file, select a layer, cut-n-paste it into your PSD file etc). When done, examine the log file - hopefully it will contain all the operations recorded for you; you can modify it (e.g. to use parameters rather than hard-coded values) and use it in your application. If for whatever reason its not enough and you need PS to do more than what scripting supports, writing an automation plugin as a helper is your next option (compile automation listeners first - you'll find all the documentation with the SDK). But again, I'd recommend starting with the scripting first - you are very likely to be able to do all or most of what you need using just that. Google 'Photoshop scripting' for more info.

  • Can't save image with Photoshop.

    We do often have a issue where we can not save the open image in Photoshop CS 6. To this day the problem appears when the image contains Adjustments Layers with Layer Masks.
    It does not matter if we try to save the image locally or on a network volume, we do only get a prompt telling us there is a Program Error. Trying to save as TIFF with layers instead of the preferred PSD format
    does not make any difference also.
    If we create a new image and copy all layers with masks and all the photoshop paths, this image can be saved and the original image can also be saved if we do a flattening prior to saving.
    I do believe this is a bug in photoshop and has nothing to do with corrupted images or other computer related issues. We are working with Macintosh and experience this problem in both Mac OS 10.8.5 and 10.9.3

    JPG compression does not support transparency, I think you
    have to convert it to png of gif first.

  • Can't see images under Photoshop CS6 file icons.

    I have installed PS CS6 and updated it to 7.2.  I can see my images under Bridge file icons, but under PS file icons, the images are generic.  What do I need to do in Photoshop?  What does Bridge have that PS does not?

    Bill Hunt wrote:
    I have installed PS CS6 and updated it to 7.2.
    Can you elaborate on this statement a bit, please?...
    He means he installed Photoshop and updated the ACR plug-in to version 7.2.
    What he neglects to say is whether he updated Photoshop itself to version 13.0.1. 

  • Can't send images or video with iMessage

    I have a very strange problem and am unablt to find a solution. I am trying to exchange pictures and videos with my friend and we discovered the following
    My friend can send all content (pictures, videos, text only) to me.
    I can ONLY send text messages to my friend, but videos and images report as "not delivered"
    My friend can ONLY send text messages to another friend, but videos and images don't work.
    I as well can ONLY send text messages to this 3rd friend...
    Somehow I am the only one being able to receive images and videos on iMessage, but it seems all our 3 phones are configured exactly the same...
    Does anybody have an idea? I think I tried everything but I might have overlooked a small thing. So any help is greatly appreciated.
    Thanks guys

    If you go in to Settings>iMessage -Try turning it off then back on and send a message to see if it works.
    If it doesnt work Try going to Settings>general>reset >reset all settings- this wont delete anything so no worries -just settings will be modified.
    After it reboots re-setup the device  and test again - dont restore from a backup- just setup a new -does it work?

  • 6288 can't send image

    I bought 6288 a week ago. If I open an image (either in phone memory or MMC) & click 'send' the phone will restart. So I can't send any image anywhere through multimedia or I/R or Bluetooth. What's the problem?

    I bought a Nokia 6288 and after a few days when I went to send an image the screen would go black, then white and then exit back to the main screen. I can receive MMS and send SMS without any problems. It's only when I try and send an image (from the card or the phone) that the phone crashes.
    Is this similar to your problem? Did you find a solution? Is it a software upgrade?

  • Can't Send Images

    For the past week or so I haven't been able to send images from skype. Sending mp3 files and documents works fine, but when I try to send a picture it's stuck on the sending image thumbnail (as the picture in the attachment)
    I've read a lot of post about this in the past few days, but I haven't found anything on this particular issue.Any help would be appreciated, thanks.

    ruwim wrote:
    Try again to reset all Internet Explorer settings: http://support.microsoft.com/kb/923737 Next reset LAN settings: Open Internet Explorer. Go to Tools -> Internet Options -> Connections -> LAN settings. Make sure that the only option selected is “Automatically detect settings”. Next clear all Temporary Internet Files: Open Internet Explorer -> Tools -> Internet Options -> General. In the section “Browsing history” press the “Settings” button and in the next window the “View files” button. Delete all files from the Temporary Internet Files folder. I've tried all of those steps, but it still isn't working.

  • How to keep lens corrections when sending images to Photoshop?

    I have a group of architectural photos shot in RAW format with a 10-20mm lens that I have applied lens corrections to in Lightroom 3.  When I open them in Photoshop using Bridge, the lens corrections go away.  I have had the same problem in using Photomatix Pro's batch processing mode to create HDR images.  If I select the trio of images from the filmstrip in Lightroom, right-click on them and then export them to Photomatix, the lens corrections stay, but if I close Lightroom and use Photomatix Pro's batch processing mode to select and process the images, then the corrections go away.  Any ideas?

    Lens correction is a function of acr, and LR communicates such settings with PS CS5 and above.  If you are on CS4, in order to keep them, LR must render them before sending on.
    The same reason you can't do batch processing from Photomatix, they don't understand LR processing without the current ACR, which is only compatible with LR3 and PS5 (and, one assumes, higher).  So when you export from LR, LR does the processing for you before sending on.. so you keep your changes.
    Same if you have CS4 or lower, LR would do the rendering for you.
    Does that make sense to you?
    Cheers!
    Message was edited by: Jasonized :  Correction, I meant a function of ACR.

  • Can't Paste Images in Photoshop CS6

    Hi,
    I'm trying to copy images from File Explorer to Photoshop CS6, but when I press Ctrl+V nothing happens. When i go to Edit, Paste is grayed out.
    Please help!
    I am using Windows 8 64 bit.

    Also, I can't drag and drop, and when I go to File > Open > Pictures only one folder shows up (Evolve) with nothing in it. Even though I have tons of other folders and images.

  • Where can i find image for Photoshop CS5- CS6 upgrade?

    I'd like to buy an upgrade of Photoshop cs5 to cs6 version. I didn't find anywhere a download link for installation image.
    Can you give me an advice? Is such an image avaliable?
    Thank's
    Steve

    Purchase CS6 products:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • Bridge CS6 can't open image with Photoshop CS6

    I installed Bridge CS6 and Photoshop CS6 with my Mac Pro with drive 1, which was cloned with drive 2 as a backup.
    Now every time I try to open my RAW file in Bridge, it opens the file with the Photoshop with drive 2 instead of 1.
    I have tried to eject the drive 2, but Bridge (with drive 1) fails to find the Photoshop in drive 1.
    I have to force to open the Photoshop CS6 before Bridge in order to open the image, is there a way to sovle this problem?

    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    edited
    If you are actually interested in trouble-shooting please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://forums.adobe.com/docs/DOC-2325
    What have you done for trouble-shooting so far anyway? (Restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be a good starting point.)
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Can't open images in Photoshop

    I was away from home for two months and my Mac book was turned off. Since I returned recently and booted it up, I have been unable to open any images (be they tiff, jpeg, gif) in Photoshop and only receive the "not responding" message. Any ideas?

    Try this:
    http://forums.adobe.com/thread/370735?tstart=0

  • Can't resize images in Photoshop CS5

    I was working in Photoshop CS5 creating a flyer when suddenly I wasn't able to resize any images.  I was adding images into the flyer fine for a while, but then when I clicked on an image to resize it there were no handles and I couldn't resize.  I've closed the program & restarted, closed the file & re-opened but nothing helps.  HELP.

    Maybe you accidentally disabled Show Transform Controls in Move Tool options.

Maybe you are looking for