Can't send mail on desktop duocore but will receive ??

Wife uses a duocore desktop and the macmail system with btinternet as the ISP. She sent an email earlier today, composed another and the machine won't send it. It just puts it into drafts and when she tries to send the spinning wheel just goes round and round. She didn't change any settings, machine just won't send mail. Any ideas what to try please ?
Thanks
Brian

Hi, might be the Mail Server, not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

Similar Messages

  • Why is imessage not sending pictures to one person but will receive them?

    I've been trying to send pictures to one person for the past two days and I can't. It will say delivered and then say not delivered with the red exclamation point. I'm messaging an iPod but I've been able to send anything up until now. Is it an apple problem? Or is it me? I've tried everything I know and nothing has worked. I just don't understand why it won't work now when it's been working for months with no issues. Any help is greatly appreciated.

    HI,
    There have been issue now and then over week ago
    http://www.apple.com/support/systemstatus/
    There does seem to be an increase in iMessage Users stating that suddenly they cannot send pics.
    In most cases it seems to be from the Mac version of Messages that contains an iMessages account that seems to have the issue.
    You list only an iPhone and talk about contacting an iPod touch.
    That would mean you are fully using iOS to have the conversation which I have not seen reported until now.
    Issues from the Mac Messages app seem to hint at being with iPhones on certain carriers.
    It could be down to a lack of Wifi or a poor speed of Cell phone carrier data feed that is the issue.
    If we were talking about AIM chats in iChat and Messages  (non  iMessages accounts) then File Transfers including Pic-in-chats are moved to a different Internet port than the one the Login to the AIM  server is made on.
    This needs to be open in a router.
    It is less clear whether Files and Pics over iMessages uses a different port.
    At present it is not clear if there is an issue at the Apple Servers for iMessages or
    if it is something about where and what service the receiving iOS device has at the time.
    For instance an iPod Touch without Wifi has not Internet Connection.
    An iPhone may have Cell phone coverage but the data contract part may be exceeded blocking SMS/MMS pictures.
    9:28 PM      Sunday; April 21, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is there a fix for "can't send mail?"

    I just spent 4+ hours on this forum and worked through all suggestions I could find - still can't send mail. It happened yesterday afternoon, from one moment to the next - suddenly all my three POP accounts are offline and there was nothing I could do about it. I checked with Entourage, same thing there as well, can't send mail.
    I have no idea if this is connected with the problem in many posts about the "can't send mail" issue or not, but at least on the surface it looks like it is.
    Any help is appreciated! Thank you.

    Yes, there are complaint sites online where I've read hundreds of complaints that trickle in one by one on different dates.
    Take a look at this post, and the comments below it:
    http://www.lockergnome.com/usrbingeek/2007/04/12/comcast-blocking-port-25/
    This is going to be an ongoing problem for different users, one at a time.
    DSL users in my area are going through a similar issue with their CenturyTel email accounts. Over the last two years they have added a new smtp server and some people were transferred immediately to it, and others got added month by month (some were on smtp.centurytel.net while others are on smtpauth.centurytel.net). Then a couple of months ago, they started requiring login and password to the smtp server, but not for all users. I get a few calls a month for the next batch. Centurytel has gone with a 3rd party email hosting company so that they don't have to deal with it.
    I'm trying to set up all clients with the latest changes, but they don't always work in advance of the changes. It's hit and miss. CenturyTel has said that they have posted notices on their help site, but who goes there?
    Maybe they are just trying to manage their tech support load during changes?
    Message was edited by: dechamp

  • Receiving mail, but can't send mail with attachments?

    Hello,
    I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
    1) can't send mail with attachments
    2) .doc (word), .pps (powerpoint)attachments are not always recognized.
    thank you all!!!

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • I can´t send mail but I can recive

    excusme for my english, my problem is that I can recibe email, but I can-´t send email to other count, p.e. hotmail etc., and when I send an email to another user of my server, he recibe the email, but the adress is [email protected],
    My nat is ok, I went to www.dnsreport.com an all is ok, I undestand that my dns is ok, but I don´t know how to change the @www.senedrac.info
    my config is
    Welcome to Darwin!
    127-131-155-85:~ jose$ postconf -n
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    html_directory = no
    inet_interfaces = all
    mail_owner = postfix
    mailboxsizelimit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mydomain_fallback = localhost
    myhostname = senedrac.info
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    relayhost = [email protected]
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpdtls_keyfile =
    unknownlocal_recipient_rejectcode = 550
    127-131-155-85:~ jose$

    It sounds like you have more than one issue.
    First.. let's just look at sending mail to outside addresses....
    You have relayhost setup with an improper setting. relayhost should either be blank, if you want your server to make delivery- or it should contain the host name of your ISPs smtp server (something like smtp.isp.com). You currently have an email address in this field, that won't work.
    The next issue is not real clear to me. You may need to clarify.
    You say that the recipient sees "[email protected]" as the return address? The return address is set in the mail client. If you are using a mail program (Mail.app, Entourage, etc), then make sure your email address is set properly. If you are sending from WebMail, then let me know and I'll send directions to fix it.
    Please provide additional information.
    Specifically, try to isolate what appears to be two separate issues
    1. Can not send mail to outside addresses
    2. Mail sent to internal addresses is successful, but shows wrong return address
    Is that correct?
    Jeff

  • I can't send mail from  mail application on my MAcbook but sends fine on iMac?

    I can't send mail from  mail application on my MAcbook but sends fine on iMac? This just started today...I checked to make sure the preferences were correct for the POP account and it's fine. HELP!

    Mail: Troubleshooting sending & receiving email messages (OS X Lion, Mac OS X v10.6)

  • I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • I can receive mail on my mac account, but I can't send mail. What should I do?

    I can receive mail on my mac account, but I can't send mail.  What should I do?

    Hello, sounds like you haven't switched to iCloud yet, the old dot Mac & MobileMe servers are going away or gone for most already.
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • I can't send mails from my outlook 2010 but can receive, I can't send mails from my outlook 2010 but can receive

    I can't send mails from my outlook 2010 but can receive, please help.

    Thank you so much for your time and help Csound1 I really appreciate it.
    Mac mail works perfectly fine so I don't want to screw it up by altering anything there.
    However, I've checked to make sure I didn't miss anything on Outlook, but it still won't send messages. I don't know if I need to fill the "Unqualified domain" field?

  • Can receive but can't send mail via BT Yahoo SMTP server port 995

    Suddenly I can't send mail from my BT/Yahoo account but can still receive mail. The message that i get is that it was rejected by the server. I have not changed the server - it is still SMTP via port 995, using SSL. Help!! Why should this have ocurred out of the blue and what do I do?

    Hi Dancing Brave,
    Thanks for visiting Apple Support Communities.
    I recommend starting with the steps in this article if you are not able to send mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Best,
    Jeremy

  • Can't send mail, but still receive it, why?

    I can no longer send mail from my computer, but I can still receive it. What is going on? This happened to my laptop first, but then seemed to just cure itself. with np intervention. Is this possibly the result of iCloud being hacked as reported in the papers? I would most appreciate any help in correcting this situation. (I've already run Disk Utility, repaired permissions and rebuilt the directory with DiskWarrior - - but these did not fix the problem.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Receiving mail fine, but can't send mail

    For some reason, my outgoing mail servers are all showing offline. I can receive mail fine. I have my own domain names, and they are all housed on the same host. My boss has one of the same domains and he can send and receive mail fine. I can receive mail, but can't send mail out unless I use my gmail server to send. All my other domains are showing offline on the outgoing. How do I get them back online, and is this a Macmail problem (my boss uses Entourage), or is it a problem with my Qwest DSL? I don't know where to start.
    I did call the place where our domains are hosted and all is OK there.
    Thanks,
    Carole

    Problem - Cannot send eMail - pop up box says smtp server needs password - if password used this is not recognised.
    Solution - Go to Mail>preferences choose Accounts, select one of the accounts.
    Look at 'outgoing mail' server, shows ' smtp.(name of server.com) (offline)' then click on it and choose 'edit smtp server list' - the box will show description - '(name of server)', server name - 'smtpmail.(server name.com)' and in use by account - '(account name)'
    press the '-' button and the above details will disappear.
    Press '+' button and type in 'smtpmail.(server name).com' in the server name box - if you are prompted to save changes, click 'OK' - this may only happen when changing the first account ..
    All should now be OK and you can now check if eMail can be sent..
    Open an 'unsent eMail' in the Outbox by double clicking on it and clicking 'send' it should be sent.
    Wilbertross

  • Can't send mail with server -- upgrade OS?

    I have a new MB, so have been setting things up. In the course of all this, I realized, what with checking settings, etc., that I can easily send mail from the new laptop, which is running whatever the latest OS is -- I think that's 15.5.5, but I have nearly constant difficulties with Mail on my desktop, which is running 15.5.2. I keep getting -- but not always -- messages saying mail can't be sent using the selected server; do I want to try another server or try later, or what. But on the laptop -- I don't get that at all.
    I did a search on the Apple site and its recommendation? Upgrade the OS. Now, I can certainly do that, though I always hold my breath for fear something will go wrong and I'll break something that wasn't broken, so to speak.
    Is anyone else having this issue? Did upgrading the OS stop it? I probably will have to, because I really do need the Mail program to work as it should. I'm getting ready to move to it from Entourage, but I can't if I can't send mail.

    I suddenly started having the can't send mail problem yesterday, and I'm on 10.5.5, so upgrading the OS is not a fix. I followed all the directions here: http://support.apple.com/kb/TS1307?viewlocale=en_US
    and that did not work. But it might, if quitting is done at the right time....
    I don't know what fixed it, and I'm not sure if it will remain fixed (last night I fixed it on my own, only to find when I started up this morning that it wasn't working again), but today I followed the advice from another discussion to delete the outgoing server (in prefs/accounts/outgoing pulldown menu) and make a new one... make sure to delete all mail that is pending (anything in outbox save as draft and delete)... and to quit. In other words - follow the instructions on the support page or some of the other discussions, but quit before trying to send again. The other thing I did was do a software upgrade - there was something for airport and a security fix that I installed. Whether it was doing just the right stuff in just the right order or if it was the software installs that moved things along, I can't say. By the looks of it, this seems to be a long time issue for Apple Mail, though I've been using it for years without issue.

  • Can't send mail since 10.4.6 update

    Since updating my OS to 10.4.6 I can't send mail. I can receive mail and I can browse online. But mail will not go out. I've verified all the Outgoing Mail Server info SEVERAL times and have had no luck. I've enabled Entourage to handle mail instead of MacMail and it won't work either. Totally stumped.
    Same thing has happened on my iBook G4 laptop by the way. I'm convinced that the update has something to do with this.

    INTERNET CONNECTION LOST
    so... since the 10.4.6 update once my computers fall asleep the connection to my wireless router is lost. (mail seems to be working ok, when i have an internet connection...)
    I have tried multiple things to fix this. Thus far the only solution seems to be resetting the router to use connect back to the internet. Once this is done the internet connection works fine, until lost or the computers go to sleep. When i wake the computer i have to do it all over again... and on top of it the post link is missing on all the pages!!! so i am replying here.
    So this time I have rebooted to my external drive with the previous version (10.4.5) to see if indeed it is the 10.4.6 update that seems to have hosed this connection somehow.
    HELP please, this is terrible annoying. Is anyone else experiencing this?
    thank you.
    PowerBook G4 and PowerPC dual G5 (10.4.6 both)   Mac OS X (10.4.6)  

  • Can't send mail on iOS 5 devices with iCloud

    A long time ago I signed up for a .Mac trial to use that address with iChat. The trial expired, and, as expected, the address continued to work with iChat, though it no longer functioned as an email address. It then came to be my Apple ID. Now, having set that Apple ID up for use with iCloud, my iOS devicess are having trouble sending, and only sending email from my iCloud address. The reason is this: I logged into <username>@mac.com for iCloud (as that's my Apple ID), and everything set up right except the mail address that iOS Mail thinks I have. It thinks the mail address for the iCloud account is <username>@mac.com. When I send mail to <username>@me.com, my iOS devices get it just fine, but when I try to send mail back, it tries to send it from the @mac.com address, and therefore fails as that is not a valid email address.
    I've tried to go into the settings and change the email address that it uses for iCLoud, but with no luck. I see a place to change it, but it is grayed out and won't let me select it and bring up a keyboard to change it.
    Is there any way to tell it that it assumed the wrong email address for my iCloud? Or is there no way to send iCloud email from my iOS devices?
    Thanks in advance!
    P.S. I can send mail via iCloud from the web app and from Apple Mail (OS X Lion), but not from iOS devices because of this glitch. I can also send mail from iOS devices using other email accounts (Gmail, Yahoo).

    I found a work around that works.   Got to Settings...Icloud....account......advanced....outgoing mail server.....
    Add an "other" server.
    Host Name p01-smtp.mail.me.com
    Put in your me.com email address as username and your Apple ID password
    SSL is on
    Authentication is password
    Server port 587
    This worked for me.....I will use this until the bug is fixed.  (you may need to use p02, p03 etc)   Don't make this server your primary.   Leave it in "on" status in the other category.
    Good luck

Maybe you are looking for

  • ABAP dump on authorization issue

    hello, I am not sure if this is the correct forum for this or not. I have an ABAP program that was written before I got here that performs the following statement <b>OPEN DATASET w_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.</b> where w_file is a

  • Do I need to change OCI layer to utilize Oracle RAC failover Feature?

    Dear Oracle Experts, From the Oracle documents, the RAC is a great feature providing the scalability and high availablility. I thought the failover features should be transparent to users. However, from this book: http://www.oreilly.com/catalog/oress

  • Send a mail with a picture from mime repository

    Hello, I want to send a mail with a picture from mime repository. The mail is sended OK, but the receiver hasn't  the picture on the mail  (don't find the picture). Here is my syntax :    st_objtxt-line = '<IMG SRC="SAPR3://005056B2002D1EE3BF8F5B5ECD

  • Where to set "module load option"

    I have been checking one teststand sequence file and I got a message to change the module load option to dynamic load module....but I simply couldn't find where to set it. please help me with any input. thanks a lot

  • I got i phone 4s 16 gb can i change with i phone 5 to pay some money on top

    i got i phone 4s 16 gb can i change with i phone 5 to pay some money on top