Can't send mail while send/receive process is ongoing

I'm Using Microsoft office 2013 std.
Problem with my outlook 2013, Can't Send an email while the outlook is downloading the emails(send/recieve process is on going) and just stuck to my to my outbox.
Appreciate for help regarding this issue.
thanks..

Hi,
Was the email been delivered after the send/receive progress finished? Based on my testing, seems it's the default behavior of Outlook email to stay in Outbox when the send/recieve process is on going.
If the email still stuck in Outbox after the send/receive progress is finished, you can treat this issue as the "email stuck in Outbox" issue and troubleshoot it according to the steps below:
http://support.microsoft.com/kb/2663435
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • I can't send/receive any message/call but I can connect to the internet. What's wrong?

    I can't send/receive any message/call but I can connect to the internet. What's wrong?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Suddenly can't send/receive emails

    Suddenly I can't send/receive emails.  I have tried deleting the account; turning phone off then on; re-entering account.  It verifies then when I save it says it cannot get mail.  I can go onto webpage via safari, and also still work emails on my computer.  Please help

    # What version of Thunderbird are you using?
    # Are you using IMAP or POP?
    # Do you have any anti-virus software running? If so, try running with it disabled.
    # Try running without add-ons. Help -> Restart with add-ons disabled.
    # go to Help -> Troubleshooting Information -> Copy text to clipboard; then in this question in this forum, right click in the Reply box and select paste. All info will be pasted. Then click 'Post Reply'.

  • HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    http://support.apple.com/kb/TS5185

  • Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Texting longer text messages or any media (pictures/video/sound etc) being sent requires data to be active. However, it does not count against your data caps.
    Since you have an iPhone, you must also be aware of the difference between iMessage and SMS Text messages. The iPhone, by default, will send an iMessage when sending another text message to anyone else with an iPhone, iTouch, or iPad. This does use your data if you are not connected to wifi. In Settings, you can turn iMessage off, and then all of your texts will go through Verizon.
    Also understand- iMessage will use wifi when connected to wifi, but would need cellular data connection to work when not connected to wifi. Regular SMS text messages that are long or any media will always use the cellular data and not wifi, so will not send if cellular data is turned off, even if on wifi. However, this does not count against your cap.

  • Xperia Z1 can not send/receive MMS after Lollipop update

    Xperia Z1 can not send/receive MMS after Lollipop update, is anyone else having this issue. Any ideas on what I can do to restore MMS?

    MMS need a data plan, there are certain carriers/networks that allow MMS to be sent w/o a data plan to their branded/locked phones, you will have to contact your carrier/network regarding this.
    Is your phone braded or was it branded? did you flashed lollipop ? 
    @KMcFarlane
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • IPhones  Can't send/receive pictures from other phone like Galaxy

      I Can't send/receive pictures from/to my iphone from other phones like Galaxy, but I can send and receive text messages. I appreciate if someone can help me.

    Is MMS enabled in your mobile phone tariff (check with your network provider) and is your phone configured with the correct MMS settings for your tariff?

  • Mail can't send/receive but Eudora works fine

    After reading through many of the threads here and changing my preferences in every conceivable way (SSL, authentication, advanced settings etc) I still can't get Mail to send or receive mail.
    However, when I opened my old Eudora, my e-mails came through lightning fast.
    Any ideas why this might be happening? I'd prefer to use Mail but will use Eudora if necessary.

    Create a new user account on your Mac with the same permissions as your existing one and start Mail. Configure your email address and see if it works. If it does then you might have a corrupted Mail Property List file on your normal user account.
    Log out and log back in to your normal user account and move the file com.apple.Mail.plist from within folder <home>/Library/Preferences to the desktop and then re-start Mail.
    It will launch as if it has never been configured before so create your primary email account and see if that now works.
    Chris

  • Lion Mail can't send/receive and requiring Force Quit.

    After Lion 10.7 , Mail Version 5.0 (1244.2/1244.3) can't send or receive (to smtp or pop servers) as usual with Snow Leopard. In addiction, Mail seems hanged and is not quitting graciously... requiring Force Quit.
    Today I noted a lot of users reporting Mail problems after Lion, and Apple site says there was only a minor changes at Mail authentication methods. I tried everything they said... and everything communities said. Nothing works. 
    Is Apple really working on Mail reported problems ?

    I get emails with my sbcglobal and ymail but i cannot send any email!! this is getting very annoying.  It used to work just fine on snow leopard. I even tried using the same setup that I have on my iPhone, same smtp etc and nothing seems to work...

  • Can't send receive email from Yahoo account or send from .mac account

    On 5/1, when launching Mail, it asked me to update to new settings or use old settings. I should have kept the old settings. Instead, I had to set up all of my email accounts again. Everything is working except receiving mail from my Yahoo account. Also, I can receive mail from my .mac account, but can't send from it. These accounts are working fine on my iPhone. Is there a way to restore old email settings? Anyone else having this problem?

    Hi Jeffrey,
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    Is there a way to restore old email settings?
    Only with a backup or Manually redoing it/them, which may or may not lose the mail you have.

  • Users can't send/receive, but are connected to Exchange Server

    Greetings,
    For some reason (happened this morning), none of my users (who are a mixture of Outlook 2010 PC and Outlook 2011 Mac) can send/receive email as quickly as usual (if at all).  Exchange server is 2010.
    Both clients are connected to the Exchange server successfully.  Sending an email usually takes (if it even goes at all) 10-20 minutes.  If I send an email from my Gmail account, again it take about 20 minutes to finally get to Outlook.
    Exchange server is not running any virus software.  On my Outlook client for instance (2010 PC), it's stuck on Updating Inbox indefinitely.
    No changes have been made to the LAN (and no other servers are having connection issues) or WAN.  I have run performance troubleshooting on the Exchange server, and all seems fine.  I have checked event viewer on both the Exchange server as well
    as the DC and DNS server (they are one and the same).  I've rebooted the DC, DNS and Exchange servers.
    Arrrrggggg!!  
    Thanks in advance for any advice.

    Hi,
    According to your description, both your Exchange accounts and Gmail account have the mail delay issue.
    Thus, I'd like to confirm the following information to narrow down the cause:
    1. Do your external users also come across the issue? Because this may be related to Network issue.
    2. Does the issue happens randomly or regularly?
    And I also recommend you use Performance Monitor to check the issue as Ed said.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • I have BIS but can't send/receive email, surf with internet browser

    i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi.  also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc.  They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them.  aren't these supposed to be running through BIS only?
    I have GPRS on top, not gprs.
    so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.
    i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS.  i have registered my HRTs several times... and resending my service books... same thing...
    -My carrier has not reported any data outage.
    - I'm in an area where I've had RIM data services (for months now). It has always been working well. I've never really had any problems with my BIS until 4 days ago when it just suddenly stopped sending/receiving emails, surfing through internet browser, using facebook, twitter, ym apps, etc.. 
    -the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
    -i've read somewhere that it may be some application error or something, so I've wiped out my BB thrice now, deleted all third party apps, everything is clean i guess, but still I end up with the same problem.
    -i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... same thing...
    can you help me out with this? i have tried battery pull, wipe out and OS reinstallation lots of times but same problem happens... 

    Hi tarifiq and welcome to the BlackBerry Support Community Forums!
    Can you send me a private message with your PIN so I can check this out for you?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Can PC send/receive texts/calls via iPhone 5?

    My iPhone 5 has poor reception where my computer is located.  Can I leave the iPhone elsewhere in the house where there is better reception and send/receive texts and calls remotely via my (Win 7) PC?  If so, how?
    Thanks,
    Ron

    Contact your carrier and see if they have a microcell (femtocell) available. It's basically a small cell antenna that connects to your broadband Internet service and provides cellular service in areas where the coverage is otherwise poor or non-existant.
    AT&T sells one for around $150. I've got a similar problem in my home. Coverage is fine upstairs, but downstairs, it's almost non-existant. The Microcell solves the problem quite nicely.

  • IPhone can't send/receive photo texts from non-iPhone users

    I've noticed a lot of other people with this same problem and so far nobody has a solution. I've tried resetting my iPhone 4 and was on the phone for an hour with AT&T last night to see if it was a problem on their end as someone else had mentioned. Nope. Basically, I can't receive any photos through text messaging (MMS) and I can't send any photos through text messaging with anyone who doesn't have an iphone. I used to be able to. Not anymore. Doesn't matter if I'm on wi-fi or cellular. I've checked to make sure I've got MMS on. I do. I've reset network settings, we've even switched radio towers to try that. Nothing.
    Can someone help?

    http://support.apple.com/kb/ts2755
    I'm with AT&T IOS 6 and have no issue with MMS.
    if that link doesn't help, call AT&T back and talk to a supervisor, as messaging is carrier related.  Also make sure you have MMS turned on.

  • I can not send/receive email via Icloud

    mail on icloud is not working anymore only on imac not ipad
    keep getting message "can not send message using smtp.mail.me.com can not be contacted port 993"
    any tips to get this sorted?
    thx

    Go to System Preferences>iCloud, turn Mail off, restart your Mac and turn Mail back on.

Maybe you are looking for

  • How to open -pdf in a secure environment

    Opening PDF files from a secured account on Internet (e.g. telephone billing info) does not work. in Safe as the file is shown as _pdf (underscore instead of dot).  We suspect this problem started after installing CS6, but are not sure. Win 7, IE 9,

  • HOW TO SCHEDULE A JOB TO RUN EVERY 30 MINS WITHOUT USING SCHEDULAR?

    Hi, I have a requirement where i need to schedule the job to run every 30 mins for 10 am to 10 pm. I ran into problems using odi schedular. Let me tell you what i did.. i have chosen the active mode between 10 am to 10 pm selected on startup/simple.

  • Setting security on an InfoProvider query

    I am running into the following issue when trying to restrict access to a web template: The web template has DataProvider (DP_2) that is not linked to a query but directly to an InfoProvider: <bi:QUERY_VIEW_DATA_PROVIDER name="DP_2" >                

  • Lost AFP connections after upgrading to 10.6.7

    Hi all, I've just upgraded our OS X server to 10.6.7. All seemed to go fine, but for some reason now none of our users are able to connect to AFP shares any longer, they just get back an error in the Finder saying "connection failed". I've tried look

  • Mapping an url-pattern to a servlet in a hosted environment

    This may not be exactly the right place for this, but I thought someone may have had similar experiences and be able to suggest something... My JSP/Servlet application runs fine in a Tomcat -standalone environment, however there are certain mappings