Can't Send Mail with Yahoo POP

Using mail program off of Panther and can recieve mail but can't send it. The error message I get is:
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The sender address (my email address) was rejected by the server."
I contacted yahoo and they said it was a problem with the apple mail client configuration.
Please help!
Thanks,
Ed

Nevermind...used my isp's outgoing mail server and it worked...
-Ed

Similar Messages

  • HT4519 can't send mail with yahoo in wifi mode

    can't send mail with yahoo in wifi mode only
    I receive this message ' appl.smtp.mail.yahoo.com' expired
    I have deleted my account and recreated. Same problem

    Nevermind...used my isp's outgoing mail server and it worked...
    -Ed

  • Can't send mail with IMAP

    Hi,
    I have two different IMAP accounts, and I can't send mail with either of them. I receive it just fine, but can't send. One of them just switched to ESMTP (I'm not entirely sure what that means), and said that many mail programs are not yet compatible with it. I know that both accounts can send, as I can send from them on the web.
    I have tried switching from port 25 to port 587, with no luck. Regardless of what I do, the program displays a window saying, "Sending the message content to the server failed." I haven't been able to send for a little over a week now. Any help would be greatly appreciated.
    Thanks

    Tonight I have been suddenly unable to send e-mail from my mac.com address.
    The problem is the same whether I try to send from my G4 laptop running OS 10.4, or my eMac running OS 10.3.9 , or from .mac web mail.
    The alert I am receiving says: "The sender address [email protected] was rejected by the server."
    I am using the SMTP outgoing mail server, not POP.
    I can still receive e-mail with no difficulty.
    I have changed no settings.
    What's up?

  • Can i send mail to yahoo from work flow

    can i send mail to yahoo from work flow  if it is possible how do i do that ? is this program enough if yes how do i do that ? do i need to write or change any coding

    Hi Neo ,
    You can use Function module  'SO_OBJECT_SEND' from your BO Method.
      For this Function module to work Email configuration should be done for 
      external  addresses..Please check with your Basis team for necessary config.
    Thank you
    Srinivas

  • Receiving mail, but can't send mail with attachments?

    Hello,
    I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
    1) can't send mail with attachments
    2) .doc (word), .pps (powerpoint)attachments are not always recognized.
    thank you all!!!

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • SendMail: can not send mail with body more than 1000 caracters

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

  • I can't send mail using yahoo?

    i can't send mail using yahoo?

    Are you using BT-Yahoo or just Yahoo?
    If you have been using BT-Yahoo, note that they have, in 2014, changed some users to BT mail through My BT and no longer use Yahoo - see BT Help online

  • I can t send mails with my telus account

    I can<t send mails with my telus account but I can received it. Does anyone of you knows how to fix it

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Thunderbird can download and send mail with Cox POP Mail, Mail cannot?

    I have Thunderbird and Mail installed.
    I can download and send mail with Thunderbird.
    I can't even set-up an account with Mail because it cannot find the POP Mail server.
    I have Firewall on with ports 25, 110 and 587 open.
    This really seems strange that I can use Thunderbird to set up and use POP Mail access to Cox, but not Mail.
    My servers are:
    pop.central.cox.net
    smtp.central.cox.net
    I've followed the steps on Cox's support web site, no success.
    I've already called Cox, they're clueless.
    Thoughts or suggestions are greatly appreciated.
    Thanks,
    --Todd
    Mini   Mac OS X (10.4.6)  

    Hi Todd,
    Well since Tbird works, we can rule out lots of things.
    Mail cannot find the POP server
    You are using the Welcome to Mail assistant to do this, and when you type in your incoming mail server info it spins the gear a bit, gives an error, and says that if you continue Mail may not work -- yes? What does the error say specifically?
    No disrespect at all, but the most likely problem is a typo somewhere / mis-specified username. Please go 'round once more.
    Good luck,
    John

  • Can´t send mail with 3g

    I have problem with my outgoing server.
    I have 3 outgoing servers:
    Primary: mail1.comhem.se
    Secundary servers: mailout.telia.com
    smtprelay1.telia.com
    It works well sending mails with Wifi but as soon it goes to 3g it doesn´t work any longer, and these messages pops up saying that address is not valid or connection timeout.
    But as soon as it get back to Wifi, swoosch and away it goes!
    What can be wrong? Have I missed something in the setup?
    Receiving mail are no problem with 3g.

    When I used  mobile-smtp.roadrunner.com   it failed to send. It put the message in the Outbox and said the sender address [email protected] was rejected by the server.
    I think that's because my roadrunner email is on the cinci.rr.com server and not the roadrunner.com server
    I had it set up:
    mobile-smtp.roadrunner.com
    SSL off
    Authentication: Password checked
    server port 587        <-----note it wouldn't accept 597 here. The 587 port is there in all mail servers once they verify
    In order for my mail to work with AT&T's network, I had to make their server the Primary:
    Primary Server: cwmx.com
    SSL off
    Server Port 25
    Authentication" Password checked
    I've tried all these below as Secondary servers
    smtp-server.cinci.rr.com
    SSL off
    Authentication: Password checked
    server port 587
    smtp-server.roadrunner.com
    SSL off
    Authentication: Password checked
    server port 587
    mobile-smtp.roadrunner.com
    SSL off
    Authentication: Password checked
    server port 587

  • By trying to send mail with yahoo smtp, i got " connexion lost" What to do?

    since firefox 3.04, it is impossible to send mails via Yahoo smtp servor : error message "connexion lost"
    == This happened ==
    Every time Firefox opened
    == urgrading

    I changed the connection security in Thunderbird from SSL/TLS to STARTTLS for the Yahoo SMTP account and I can now send mails without problem with the Eset IMAP checking enabled. Problem solved. Thank you

  • Can't send Mail with AOL address-out of ideas

    hello,
    I can recieve mail just fine. It's only when I try to send it. I've tried changing the outgoing server to smtp.aol.com and 4.78.166.10.
    changed the ports from 25 to 587 to 1024.
    I appreciate your help. thanks in advance.
    -Seth
    powermac g4   Mac OS X (10.3.9)  

    My girlfriend and I are RoadRunner customers and RR allows using an SMTP server outside of their network as long as the SMTP server is authenticated.
    I set up my girlfriend's AOL account in Tiger Mail (and the only email account she uses) on my old TiBook that I loaned her until she purchases her own Mac and she sends mail with her AOL account with no problems.
    The AOL SMTP server settings are as follows:
    Outgoing Mail Server: smtp.aol.com
    Server Port: 587
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: Password
    User Name: Your AOL screen name or the portion of your AOL email address in front of the @ sign only.
    Password: The password for this screen name/email account - the same used for checking the account for new mail.
    If your settings are the same, try deleting and recreating the account in Mail.
    If this doesn't work and it should since it works for my girlfriend, you can select/use the RR SMTP server to send mail with your AOL account which is invisible to all recipients.

  • Can't send mail with server -- upgrade OS?

    I have a new MB, so have been setting things up. In the course of all this, I realized, what with checking settings, etc., that I can easily send mail from the new laptop, which is running whatever the latest OS is -- I think that's 15.5.5, but I have nearly constant difficulties with Mail on my desktop, which is running 15.5.2. I keep getting -- but not always -- messages saying mail can't be sent using the selected server; do I want to try another server or try later, or what. But on the laptop -- I don't get that at all.
    I did a search on the Apple site and its recommendation? Upgrade the OS. Now, I can certainly do that, though I always hold my breath for fear something will go wrong and I'll break something that wasn't broken, so to speak.
    Is anyone else having this issue? Did upgrading the OS stop it? I probably will have to, because I really do need the Mail program to work as it should. I'm getting ready to move to it from Entourage, but I can't if I can't send mail.

    I suddenly started having the can't send mail problem yesterday, and I'm on 10.5.5, so upgrading the OS is not a fix. I followed all the directions here: http://support.apple.com/kb/TS1307?viewlocale=en_US
    and that did not work. But it might, if quitting is done at the right time....
    I don't know what fixed it, and I'm not sure if it will remain fixed (last night I fixed it on my own, only to find when I started up this morning that it wasn't working again), but today I followed the advice from another discussion to delete the outgoing server (in prefs/accounts/outgoing pulldown menu) and make a new one... make sure to delete all mail that is pending (anything in outbox save as draft and delete)... and to quit. In other words - follow the instructions on the support page or some of the other discussions, but quit before trying to send again. The other thing I did was do a software upgrade - there was something for airport and a security fix that I installed. Whether it was doing just the right stuff in just the right order or if it was the software installs that moved things along, I can't say. By the looks of it, this seems to be a long time issue for Apple Mail, though I've been using it for years without issue.

  • I can't send mail with my google apps account using mail

    Can anyone help me here.
    My Mail program is acting strangely.
    First I could send email but not with an attachment. Now I cant send at all.  I am using a Google Apps Email account. It was working fine yesterday.
    I also have an iCloud @me.com account which sends mail with the attachments but the sent mail is not showing up in the sent items box.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Suddenly can't send mail with Comcast.

    Just thought I'd add my experience to the chorus. Use Mail on a G4 PB running latest version of Tiger with Comcast as ISP. Few days ago kept getting the message that port 25 timed out. I questioned Comcast, and got a standard reply to try port 587, which I did, and which works. I can now send mail through port 587.
    Question though: Is this a Comcast problem, or an Apple Mail problem. It seems like it cannot be a coincidence that "can't send mail" seems to be a hot topic all of a sudden, and that it involves various ISP's and platforms. I haven't heard the word "virus" mentioned.

    In my mind, it's a silly attempt by ISPs to limit/cut off SPAM, not that that is a silly idea in and of itself, but changing the Port number isn't going to last very long, add to that not notifying Users/Paying customers before hand is negligent if not criminal!
    The Spammers probably knew and adjusted to the change before the first Customer figured it out.

Maybe you are looking for

  • How to Configure Microsoft loopback adapter in windows 2008

    Hi all, I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime. I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont k

  • Is there a way to password lock specific files I put on the playbook?

    is there a way to password lock specific files I put on the playbook - both media & non-media files/folders? ideally if a file is password locked, it can also be made hidden? thanks.

  • Transport Tax codes.

    Hi , I have the  requirement to create new tax codes but somehow they are already created in Development I need to follow all these steps .How can I move them to Test enviorment and production what is the best way to move all configurations: New Tax

  • EFP and Intranet Portal - Best Practices for architecture

    Hi All,    We are planning to create a portal for our partners  (b2b scenario). This portal will provide anonymous  and user specific access. We also have a intranet portal with ESS and MSS.  I have some doubts around implementing EFP and Intranet po

  • Unit of Measure issue - Need to be changed from volume to no dimention.

    Hi Experts,            I have a unit of measure as TB, which is tube. This is a volume unit. The user want to change this as "Pls have this be corrected as a non-dimensional unit of measure ". For this what is impact on system.           Precautions