Can't send or receive messages or send?

Why can't i send any messages or receive any messages on my ps vita? This started 3 hours ago, how can i fix this problem? I have tried signing out, reconnecting wifi, restarting the system and refreshing the messaging app. Can somone please help me? I can't use the psn app to on my mobile, neither on my laptop. Please help me ASAP!

At the time of your post, psn was having problems.
For future reference, you can check psn status here https://status.playstation.com/en-us/

Similar Messages

  • I revive messages from everyone but one person on my phone I had my iMessage on my iPad but I turned it off and also off on my phone but I can't seem too receive messages from them but they get mine,?

    I revive messages from everyone but one person on my phone I had my iMessage on my iPad but I turned it off and also off on my phone but I can't seem too receive messages from them but they get mine,?

    They have an iOS device? If so, have them send as an SMS, not an iMessage.

  • Using self_reception, can I differ the received messages between received and transmitted ones

    Hi,
    i have a NI-CAN PXI 8464 card series 2 (well, at least I hope it's series 2 :-) ) and want to use self_reception, for that I can receive incomming messages and my one sent one. Is there a way how I can tell if a received message is a incomming one, or a transmitted one.
    I'm using the Frame API with CVI and the latest NI-CAN Driver
    Thanks in Advance
    Olli

    There is no special treatment of
    these frames, they are seen on the CAN bus by the receive portion of
    the transceiver just as any other frame transmitted on the CAN bus. So unfortunately you cannot differ them from frames received normaly over the CAN bus. The only way would be to create a logic which stores transmitted frames and are compared agains frame received in the read queue.
    http://digital.ni.com/public.nsf/allkb/14429577623AEB5286257005004A9B02?OpenDocument

  • My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    Instead of trying to restore through iTunes, use the Find My iPhone to your advantage.
    Either go to www.icloud.com and perform a remote wipe of the device via FMiP, or download the FMiP app to another iOS device and do it from there.
    A remote wipe will also restore the device back to factory settings.

  • Can I execute the received messages having errors when executed again?

    Hi SDN,
    I am new to XI, and now have a exercise to let R/3 send a IDOC into XI, and then XI saves it to a file.
    Now I can get the message using tcode IDX5 in XI, but having some errors. After do some modifications I want to execute the received messages again, Can I do?
    Thanks for your help ahead.
    Bruce

    Hi,
    You can manually restart the message in XI , by Selecting the message in SXMB_MONI and then clicking on the button Restart.
    If you want to do this automatically, refer this blog,
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Regards
    Bhavesh
    Message was edited by:
            Bhavesh Kantilal

  • Upgraded to Yosemite,  Created new apple ID as couldn't remember last one now can't update iPhoto receive message this update not available for this apple Id either because it was bought by a different user or item refunded or cancelled.

    upgraded to Yosemite and now can't update Iphoto or Imovies receiving message this update not available for this apple ID because it was bought by a different user or item refunded or cancelled.  Is there an easy fix

    Unfortunately, anything obtained at the app store remains tied to the Apple ID used to obtain it forever. You will either have to start over with your new ID or try to recover the original ID.
    Frequently asked questions about Apple ID

  • Can't see the received messages in inbox

    i use nokia n70.now im not able to see some messages send by one or two numbers.In log it is showing tat i hav received msg but i cant see it in inbox...
    plsss can anyone help me ..

    MAIL is in sync with GMAIL (forgot to add this info).

  • How can I transmit and receive messages using Vector CANTech CancardXL with LabVIEW?

    I'm a new LabVIEW user and I need transmit and receive CAN messages using a CancardXL from Vector CANTech with LabVIEW.
    Could somebody have any vi or suggestion?

    I made a set a LabVIEW VIs to work with Vector/Softing CANCards starting from an example program I downloaded from Softing. These use the Call Library Node to interface with the cards .dll.
    I can't give these out because they were developed for a customer. I would contact Vector and see if they have an example program for your card. Might be the same one I started with.
    [caution, salesman hat going]
    Of course if you need help developing the VIs, we'd more than happy to assist you.
    [remove saleman hat]
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • See only received messages in inbox?

    Hi, I am just a couple of days into BB curve ownership and we're getting along well so far.  I do have one issue that I can't resolve--I would like to only see my received messages in my email boxes on the BB, but instead I see all my received and sent messages, and they all look like new messages.  How can I view only received messages?  thanks. 

    Sorry for my question, but i think you are wrong.
    Which mail you have in the blackberry?
    I think you are receiving a copy from your sent messages, why?, because if you have a new message you can see an envelope, but if you sent a message you have a check mark, not an envelope.
    If you have gmail account check this link to solve the problem
    http://www.blackberryforums.com/general-blackberry-discussion/54675-how-prevent-g-mail-sent-items-be...
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

    I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

    I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

  • TS2755 I can't receive messages on my iPhone 4?? It will let me send them just not receive, and this happens on text and iMessage. Help anyone?!

    I have a iPhone 4 on contract and every now and then it will stop receiving messages when I am in the middle of a conversation. I don't use iMessage as I sometimes go over the limit of my Internet data. So I stick with SMS. And even when I do try with iMessage I still can't receive messages. I don't know if this is a on fault on the phone but it's a really bad downfall if its common on most iPhones. Don't get me wrong but I love this phone I think it's great but it's annoying when I can't receive messages. And at this moment
    In time I still can't receive them. Been happening for 12 hours now and it's never been this long usually, advice anyone?

    Hi Tnolen15,
    If you are having issues sending or receiving messages from a specific contact (in this case, your wife), you may find this portion of the following article helpful (ignore the numbering):
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • HT4979 why can I not send email when away from my home wifi? Am able to receive messages OK, and outgoing mailserver is correct?

    Why am I unable to send email when away from my home wifi ? I am able to receive mail OK, and have double- checked the outgoing server which is correct. This problem is consistent with my Macbook Pro, iPhone, and iPad2.
    Attempts to send messages results in them sitting in the Outbox and never- ending 'sending message' displayed.
    I am able to send using my   me.com  server.
    Home service provider is Cogeco.
    Any help would be appreciated.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • When I try to go to the photo gallery to choose a picture to send to my email address by using my Iphone it can't send or receive messages. Yahoo password is being asked which I have forgotten. How can I correct this?

    With my my I phone as I try to choose a picture from the photo gallery to send it via email using my Iphone, I can't seem to send nor receive messages anymore. It is asking for my yahoo password. What password will that be as I have forgotten it. I know what my personal password on my yahoo address when I go to a regular laptop or desktop but with Iphone I am unable to to retrieve this password because it does not give you an option to change a password. What shall I do to correct this problem?

    It's the same password.  Go to settings - mail - yahoo - enter the password for your incoming and outgoing mail server.

  • HT204053 The one alias I've had for over 5 years has not fully migrated over to iCloud. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to my old alias. I can no longer send emails using this alias. Help!

    For years I have been using [email protected] for business.
    It is on my business cards, stationary and most of my closest correspondences are maintained off of that email.
    The documentation I've read indicates aliases should be transferred over as part of this iCloud migration but this does not seem to be the case. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to the alias. I can no longer send emails from this alias.
    How do I get this corrected?
    Ali,
    [email protected]
    A.K.A
    [email protected] 

    Workable solution found here:
    https://discussions.apple.com/thread/1589996?start=15&tstart=0

  • HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    http://support.apple.com/kb/TS5185

  • Can't send Text messages to Android phones or receive text from any websites

    I cant send text message to android phone or even to my gmail account from iphone 4s. I have disabled iMessage and rebooted the phone. I have also reset my apple password with no luck. This is a corporate phone.

    Hi LASalem,
    Welcome to the Apple Support Communities!
    I understand that your iPhone is not sending/receiving messages to certain devices the way your would expect. To begin the troubleshooting process, I suggest working through the troubleshooting information in the attached article.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Best regards,
    Joe

Maybe you are looking for

  • How to programmatically call remote application module - JDev 10.1.3.3.0

    Hi, I've an ADF web application (10.1.3.3.0) deployed onto an OAS server. I'd like to be able to access view objects via the application module of this web app from a simple java class on another server. I've created a simple class to query a local a

  • GTS 7.2 - Error with account assigned purchase order without material

    All, I am creating an account assigned purchase order without any material master in the feeder system (ECC 5.0) and it a standard SAP functionality. I am getting the following GTS related pop up message and documents are posted to technically incomp

  • Save For Web Question

    How do I get photoshop to stop adding hyphens to file names when I save to web

  • Developer Workplace u0096 installation errors (Configure CAF)

    Hi, I am installing SAP NW 2004s Developer Workplace (SP09) in my laptop and the process always stops when we get to the "Configure CAF" step. The only error I could find so far is in the sap management console, about JMX adapter, regarding ObjectNam

  • Batch upload function in SRM system?

    Hi, We are using Web Based SRM system, which should be a very old version of 2004. It's not easy to use, and low-speed because of it's web-based. May I know if there is a way to have the batch upload of the shopping cart information? Or this function