Can't send pic messages after latest update.

I have an iphone 4, which I mistakenly upgraded to ios 7, it is off contract and I've been using it as a gophone through AT&T, with no data plan.  Ever since the upgrade to ios 7 I've been unable to send/receive picture messages. Before the update I could send/receive pictures with no problem, but nothing now.
any help would be greatly appreciated.

Make sure the 'send as sms' setting is turned back on. The update turns it off.
I always go through all the settings in everything checking what is on and what is off whenever I do an update to make sure it hasn't changed anything I don't want changing.

Similar Messages

  • Xperia Z1 can not send/receive MMS after Lollipop update

    Xperia Z1 can not send/receive MMS after Lollipop update, is anyone else having this issue. Any ideas on what I can do to restore MMS?

    MMS need a data plan, there are certain carriers/networks that allow MMS to be sent w/o a data plan to their branded/locked phones, you will have to contact your carrier/network regarding this.
    Is your phone braded or was it branded? did you flashed lollipop ? 
    @KMcFarlane
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Can't see Korean characters properly in text messages after latest update

    Pretty simple, Korean characters used to work on my Q10 (being able to see them), but now after the latest update, they show up as half Chinese characters and completely garbled and unreadable.
    This has basically made my Q10 useless to me, and I've moved back to my Galaxy S3. While I love my Q10 and BlackBerry, all of the bugs I've encountered has sort of made me... well, not happy.
    Is there any chance this particular issue is going to get fixed?
    Thanks.

    Just as additional information: moving my SIM card to a different phone and recieving the exact same text works on other phones, so it's definitely the Q10 and latest update (as I never had an issue previously with it).

  • How do I get around this bug: can't open my site after latest update?

    I installed the latest update three days ago and have been working on my site up until 11 hours ago. Just opened it to work again and get an "updating assets" message that never ends.
    Also since the update my businesscatalyst isn't working when I try to publish: "Query failed" 
    Supposed to launch test site Monday morning. Bad timing. Love Muse and hoped the update would resolve some glitches, not add more. How can I trust any updates now?
    I'm on a macbook w/retina OSX 10.8.2

    Hello,
    Can you please send me your .muse file [email protected] with the subject attn: Marc and a link to this thread so I can take a look at it?
    Thanks,
    Marc

  • Can't restore backup up after latest update in operating system

    after latest ipad update I canot restore backup.  Ipad version is 7.0.6 (11B651)  ITunes version 11.1.5.5
    It attempts to restore from backup for about 30 minutes then stops and displays a message "ITunes cannot restore backup it is not compatable with IPad being restored

    Since your profile above mentions iOS 5.1.1, I wonder if you are trying to restore to an original iPad.
    If not, I wonder if you are trying to restore to some iPad that is not running iOS 7.0.6.  You cannot do that.

  • Error message after latest update and backup, can't operate program at all, no customer service.  LR 5.5, Windows 8.1

    I updated to LR 5.5 and later restarted my computer.  I didn't use the program for a few days and then when I did, it wanted to backup the catalog.  I agreed and closed the program.  The next time I opened it, it asked me for my region, saying it was required.  When I answered, I got an error message saying it has encountered an error reading the preview cache and needs to quit.  It fails to fix the error and gives the same message over and over.  I can't use the program at all.  Customer service has apparently been discontinued and I'm really at the end of my rope with this whole company.  I don't think I've ever had a mass-release program with so many problems.

    open disk utility, make sure that you're back to only 1 partition should be 'macintosh hd' unless you renamed it
    do not try to use the disk, instead DL the x64 8.1 pro ISO from this link, and once it is finished, then open bca and choose all 3 options (copy iso, copy windows support and install windows)
    http://getintopc.com/softwares/operating-systems/windows-8-1-download/

  • Motorola Droid 4 not sending text messages after firmware update?

    Ever since the most recent update I've been having major issues with my texts not going through. I have to completely reboot my device. Any ideas other than doing another factory reset?

        Hi CyJoi83,
    I use my text messaging feature all day and I can understand how frustrating it must be to have issues with it. Are you using the native text messaging application? Are you using a different application (i.e. Handcent, Go SMS, etc.)? My son has a Droid 4 and he also had some post update issues but all issues were resolved by doing a http://vz.to/TZvgLF factory reset. I recommend doing a factory reset and then install your third party applications one at a time and test a few hours before the next install as you may also have an application conflict that is causing the issues. Keep us posted.
    AntonioC_VZWSupport
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Can't connect to internet after latest update

    Help.... ipad won't connect to the internet despite having full signal and being connected to home broadband, i know its not the connection as both iphones and macbook work fine..... was ok till i updated the software, anyone suggest anything?

    HI and welcome......
    On your iPad...
    Tap Settings / General / Reset / Reset Network Settings.
    That resets to factory default. You may be prompted for your network password.
    Hope that helps...
    Carolyn

  • TS4461 unable to send pic messages with my old ipad

    unable to send picture messages with older ipad. I have been receiving pic messages and sending & receiving regular txt but can't send pic messages out.
    I'm thinking I have a setting wrong. Please help!

    Hello Jane,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps in the support article linked to below in order to resolve this issue you're experiencing with your iPad:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Take care,
    Alex H.

  • Issues with sending text messages after updating to 8.1

    I having problems sending text messages after updating to 8.1, get a message saying Message Send Failure. I have an Iphone 5s.

    Hi CWH52,
    Thanks for visiting Apple Support Communities.
    If you have not been able to send text messages after updating to iOS 8.1, you can find some helpful troubleshooting steps in the "If you can't send and receive SMS" section of this article:
    iOS: Troubleshooting Messages
    The steps found here can help resolve many issues that affect your ability to send text messages.
    All the best,
    Jeremy

  • Can`t send pics via messages

    I can`t send pics on my MacPro via messages (10.8). Sending text is no problems. How can I solve the problem? Thanks.

    HI,
    At the moment I cannot replicate this.
    I actually came across the "Quit IMTransferAgent" elsewhere in the Messages categorised Posts here.
    If I try to replicate this on my Mac then the Activity Monitor list bounces with something but I never see the process name as it finishes too quickly (even if I send from another Mac).
    It tends to be the Incoming end that says the file/pic is "Waiting"
    Does you Buddy see the waiting Message ?
    Do they have the IMTransferAgent showing continuously in the Activity Monitor at their end ?
    There will now be a break in transmission form this time zone
    10:37 PM      Saturday; September 15, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How come i can send pic messages but cant get pic messages on my i phone 4s

    how come i can send pic messages but cant get pic messages on my iphone 4s

    http://support.apple.com/kb/ts2755

  • I updated my iPhone 4 to iOS 6 now I can't send pics.

    I updated my phone last night. It was working just fine before that. Now today I can't send pics to anyone!  What happened and how do I fix it?

    Check in settings that MMS is turned on.   Also contact your phone carrier to see if they can resolve the issue.

  • TS3899 Why can't I send email messages after 7.1?

    Why can't I send email messages after 7.1?

    Hi Honeylev,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for email on your iPhone:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this information helps ....
    Have a great day!
    - Judy

  • After latest update to yosemite I can not open finder or any other windows from my desktop

    I can not open any windows after last update to yosemite. Finder can not be reopened. Software version is OS X 10.9.5, Macbook pro mid 2009.

    Good day Jeff.
    I am running most current Adobe Reader X.
    Tks Mark

Maybe you are looking for

  • File adapter parameters

    Hi Experts, In  file adapter, in file access parameter what is sourse directory , file name? and in processing parameter what is archive directory? i gone through the IDOC-File scenario PDFS but still confused suppose iam sending file from legasy sys

  • Cannot select role in AC10 Access Request: VVV urgent

    Hello, when i try to create request i cannot select role it says no record found. Did sync job and imported role as well. I f i selct existing assigment for any user it shows role assigned  but disable since its not maintained in ERM Please help, Pra

  • Sending mail with username and pasword.

    Lets say that I wanted to write some code which can send messages via my gmail account. How could I tell my session that what my username and password are?

  • How do you change the FILE "print code" resulting printed font size?

    I would like to adjust the "Print Code" resulting printed document font size. Though the changes can be made in display font for the Code window via a file or the Preferences Menu, I cannot find the style information to change the Print Code. Thanks

  • Sap console for windows 7 64 bit version

    Hi Everyone, I recently got a laptop which has Windows7(64 bit) installed in it. Please can anyone tell me from where can I download SAPLOGON for the above version. Thanks, Shubham