Can't send Virgin Broadband email from N97
I have a new N97 and have set up email in the N97 as per settings in outlook express....Virgin Broadband is my ISP
Settings - Incoming Mail Server Type: POP3, Incoming Mail Server Name: mail.virginbroadband.com.au, Outgoing Mail Server Name: smtp.virginbroadband.com.au.
I can receive email ok, but cannot send email. It starts to send then says "Unable to send message: recipient", then checks my mailbox user name & password (which are correct), then tries to send again but keeps repeating those steps....
What should my security setting be? Port is set at the default (25).
Any ideas? Is it a Nokia problem or Virgin Broadband?
I have exactly the same problem with my N97 mini. The contract is with Virgin, I've called them and basically they said get lost - if you can browse it's not their problem.
I've tried setting email up with my provider LCN using the pop/smtp setting that work in outlook. Receive is fine, send doesn't work.
I then tried setting up a gmail account because setup does not need any pop/smtp settings, just a username and password. Same problem Delivery Status Notification 500.
I bought this phone purely for the email capability - so I'm not happy. I've wasted hours trying to get this to work. I've noticed something on one of the forums that alleges that Virgin does not support email smtp sending from mobiles but not sure if that's just hearsay.
I'm going to call Virgin tomorrow and try and get them to take the phone back under their 28 day guarantee but I'm not optimistic.
Similar Messages
-
How can I send pictures or email from my desktop to a cell phone?
How can I send pictures or email from my desktop to a cell phone?
I use Gmail for my emails.By sharing playlists you mean sending the list of song titles along with the songs themselves you can't. That would violate Apple's contracts with the studios regarding sharing music, videos, books, etc. Which is strictly forbidden. With the single exception that I am aware of which is Home Sharing.
If you just want to share the list of song titles you could take a screen shot and email that. Hold down the home button and press and release the power button. The image is then stored in your camera roll. -
Can I send a delayed email from an iPad? if so, how?
How can I send a delayed email from my iPad?
The only way would be to draft the E-mail and then close the iPad. A draft would be created that would, I think, be sent the next time you turn the iPad on.
There is no "time delay" function.
Barry -
How can a send a group email from ipad
How can I send a group email from iPad
You need a third party app. You can't create contacts groups in the built in mail app. Look at...
http://solubleapps.com/mailshot/
or
http://www.redbits.com/iphone/groupemail/ -
I can't send or receive emails from my Mac...please help
I can't send or receive emails from my Mac...please help
OS X Mail: Troubleshooting sending and receiving email messages
-
Can't send or receive email from one account
Just bought the iPod Touch last week. Set up Hotmail account with no problems. However my MacDialup.com account (used to be dial up, but is DSL now) won't work at all. They aren't set up to use SSL, so I turned that off after the iPod automatically tried it. I tried IMAP and POP, tried changing incoming server port number from defalt 143 to 110, triple checked spelling on every single entry including password. Tried calling my ISP tech support and talked to a tech who owns an iPhone and lives in the bay area, but he couldn't figure it out. I tried deleting the MacDialup account then syncing the Touch to my iTunes on my MacBook Pro (which has no problem sending or receiving email from this same account) and had the email settings imported from the MacBook Pro - still no luck. Tomorrow I'll try bringing both my MacBook Pro and iPod Touch into the Genious Bar. Maybe they can figure it out.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I can't send or receive emails from my Ipad. Support didn't fix it
I can't send or receive emails. I tried to turn it off and on. I also tried to open all the servers and nothing worked. Please help. This is the older Ipad and I don't want to purchase anything if I don't have to.
I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark. -
How can I Send song by email from ipad ?
I mean from songs already existed in my Music.
You can't. You can Gift a song in iTunes if you pay for it, but you can't send an existing song via email. If you could, people would be sharing purchased music all the time.
-
Can I send a group email from my iPod?
Occasionally I need to send email to my Sunday School class. It is easy to compose a group email from my computer, but the group names don't show up in my email address list on the iPod. I can select the group name and manually select each individual, but that is quite time consuming on a list of 40 people.
Is there a way to select the entire group on the iPod Touch?You need an app to do that. There are a number of them, such as Speed Names.
-
Can Sales send Eloqua template emails from within SalesForce?
Is there an out of the box solution for sales people to send a marketing template email from within SalesForce?
Can Sales select multiple contacts and send them the Eloqua email from within SalesForce?
Thanks
JuanHave you tried using a mailto link on the form. We have found that this is accomplishes a lot of what F9 did in SOP. What you don't get is multiple templates, as the template is defined when you create the web link.
Greg. -
Can't Send or Receive Email from Exchange behind ASA 5510 with CSC SSM
We are upgrading from a Pix 515e to a ASA 5510 with CSC SSM. We cannot send outbound email or receive any email from the outside world. I have placed a call with Cisco Support with no luck. Here is a copy of my config: Any Help would be appreciated.
show config
: Saved
: Written by enable_15 at 07:17:44.760 CST Wed Jan 18 2012
ASA Version 8.4(3)
names
interface Ethernet0/0
nameif outside
security-level 0
ip address 216.XXX.XXX.XXX 255.XXX.XXX.XXX
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.5 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
<--- More --->
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
nameif management
security-level 100
no ip address
management-only
boot system disk0:/asa843-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object network obj-192.168.5.0
subnet 192.168.5.0 255.255.255.0
object network obj-192.168.0.0
subnet 192.168.0.0 255.255.255.0
<--- More --->
object network obj-192.168.9.2
host 192.168.9.2
object network obj-192.168.1.65
host 192.168.1.65
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.0
subnet 192.168.2.0 255.255.255.0
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj-192.168.6.0
subnet 192.168.6.0 255.255.255.0
object network obj-192.168.8.0
subnet 192.168.8.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq ftp
port-object eq www
port-object eq pop3
port-object eq smtp
object-group network Red-Condor
description Email Filtering
network-object host 66.234.112.69
network-object host 66.234.112.89
object-group service NetLink tcp
<--- More --->
port-object eq 36001
object-group network AECSouth
network-object 192.168.11.0 255.255.255.0
object-group service Email_Filter tcp-udp
port-object eq 389
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service DM_INLINE_TCP_0 tcp
group-object Email_Filter
port-object eq pop3
port-object eq smtp
object-group network Exchange-Server
description Exchange Server
network-object host 192.168.1.65
access-list global_mpc extended permit tcp any any object-group DM_INLINE_TCP_1
access-list outside_access extended permit tcp any object obj-192.168.9.2
access-list outside_access extended permit icmp any any
access-list outside_access extended permit tcp any object-group Exchange-Server eq https
access-list outside_access extended permit tcp object-group Red-Condor object-group Exchange-Server eq smtp
access-list outside_access extended permit tcp object-group Red-Condor object-group Exchange-Server eq pop3
access-list outside_access extended permit object-group TCPUDP object-group Red-Condor object-group Exchange-Server object-group Email_Filter
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit icmp any any
<--- More --->
pager lines 24
logging enable
logging console debugging
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
ip local pool vpnpool 192.168.5.1-192.168.5.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
object network obj-192.168.9.2
nat (inside,outside) static 216.XXX.XXX.XXX no-proxy-arp
object network obj-192.168.1.65
nat (inside,outside) static 216.XXX.XXX.XXX no-proxy-arp
object network obj-192.168.1.0
nat (inside,outside) dynamic interface
object network obj-192.168.2.0
nat (inside,outside) dynamic interface
object network obj-192.168.3.0
<--- More --->
nat (inside,outside) dynamic interface
object network obj-192.168.6.0
nat (inside,outside) dynamic interface
object network obj-192.168.8.0
nat (inside,outside) dynamic interface
access-group outside_access in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 216.XXX.XXX.XXX 1
route inside 192.168.0.0 255.255.0.0 192.168.0.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server isaconn protocol radius
aaa-server isaconn (inside) host 192.168.1.9
timeout 5
key XXXXXXX
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
<--- More --->
http server enable
http 192.168.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set AEC esp-des esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca server
shutdown
<--- More --->
smtp from-address [email protected]
crypto ca certificate chain _SmartCallHome_ServerCA
certificate
quit
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.0.0 inside
telnet timeout 5
ssh 192.168.0.0 255.255.0.0 inside
ssh timeout 5
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 208.66.175.36 source outside prefer
webvpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
<--- More --->
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
<--- More --->
inspect netbios
inspect tftp
inspect ip-options
class global-class
csc fail-close
service-policy global_policy global
prompt hostname context
call-home reporting anonymousHello Scott,
So Exchange server ip is obj-192.168.1.65 natted to 216.x.x.x
object network obj-192.168.1.65
"nat (inside,outside) static 216.XXX.XXX.XXX no-proxy-arp"
The ACL says
access-list outside_access extended permit tcp object-group Red-Condor object-group Exchange-Server eq smtp
access-list outside_access extended permit tcp object-group Red-Condor object-group Exchange-Server eq pop3
From witch ip addresses are you trying to send traffic to the exchange server?
Please do a packet-tracer and give us the output
packet-tracer input outside tcp x.x.x.x( Outside host ip) 1025 216.x.x.x.x 25
Regards,
Julio
Rate helpful posts!!! -
I have not used this Touch iPod for quite some time and thought I would use it for collecting email when I am out. I have wasted a lot of time trying to get this to work and now wonder if the 2nd generation is too old to send and receive email.
I am using imap on all my other devices. I use a Google domain email address. The only divice I have that will not sync is this older generation iTouch. The version without the camera. Model PB528LL. I know my email address is correct and the password works everywhere else.
-
I am unable to send or rorward emails that I get on my iphone 4. Rebooting did not work
Correct the settings for the email account. Contact the email provider for assistance.
-
Can I send 2 separate emails from one Submit Button?
Have a referral form that an employee completes referring a candidate for a specific position.
Fields are: EmployeeName, EmployeeEmail, Candidate, Position, ReqNo.
I created a submit button (used regular button and changed it to a submit and entered an email address). The form is sent to this email address in a PDF format. This works great.
Now at the same time I would like send a message to the employee acknowledging that we have received their referral -utilizing their email address from the form.
Is there anyway that I can combine both of these actions on the Submit button I already have created?To do so i guess you could use this to send an email in ur regular button (not a submit button) in the click event
var oDoc = event.target;
oDoc.mailDoc({
bUI: false,
cTo: "Email here!",
cCC: "",
cSubject: "Insert Subject Here!",
cMsg: "Before submiting the email, include attachments 1, 2 and 3:\n"
and then you can resend an email again with the code above repeated -
TS3899 I can't send/reply/forward emails from any of my email accounts.
The tool bar is missing from the top of the messages.
If the icons are missing, go to inbox and swipe the email to the left, then tap more. Now you can reply, forward, etc. IF the icons are still missing you can send letters from contacts.
Maybe you are looking for
-
Do Not Check Uniqueness of Data in Write Optimised DSO
Hello, I am working with write optimised DSO with already billion records in it. I have flag 'Do Not Check Uniqueness of Data' in Settings as checked(means it will surely not check for uniqueness of data). I am thinking of removing this flag off and
-
How can I open my iPhoto library after I installed a new HD?
My hard disk crashed. I got a new one installed. Now, when I sync my iPhone or open iPhoto I get: "You can't open your photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please qui
-
I have the most recent version, but people tell me...
I am using Windows 7 with the most recent version of skype. 7.4.0.102. Some people cannot add me to group chats, and in any group chat I am added in I cannot talk or see messages. The only chats I can talk in I have to make. 1 on 1 chat works fine. I
-
I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this
-
HT3275 what is the best way to retreive photos that were in the trash & it was emptied
What is the best way to retreive photos that were in the trash & were emptied