Can't set fsb clock (k7t266 pro )

Hi there,
I hope someone of you gurus is able and wanting to shed some light on my problem:
I replaced the duron 700 on my k7t266 pro with a xp2000+
(palomino). When I want to change the fsb clock in the bios
I can't. It stays 100Mhz
I upgraded the bios with ver 1.90, and disabled bios prot.
What is it that I'm doing wrong?
TIA

should i try a lower version of the bios?
In the bios setup menu i don't have the possibility to load
high-performance settings ( that option isn't there).
But maybe that is correct in ver 1.90
thanx

Similar Messages

  • Can I set up my Macbook Pro to boot to Win 7 from an external drive?

    Rather than partition my internal drive for having to work with Windows & Office 2010 (specifically Access 2010) can I set up my macbook pro to boot to Win 7 from an external drive?

    No, not with Boot Camp. I've never even tried it with a VM (which I use) - I keep all the data on my internal drive. I'm not saying that it couldn't be done with a VM, I've just never tried it.
    Clinton

  • How can i set up my macbook pro that the sent emails show up in the sent folder?

    How can i set up my macbook pro that the sent emails show up in the sent folder?

    look at the Preferences and open the "Mailbox Behavior"  maybe the sent mail is being stored on the server?
    I going to have this post moved to the "Mail" forum

  • Can I set up my macbook pro with an ethernet connection?

    can I set up my macbook pro with an ethernet connection?

    MacBooks Pro with Retina display don't come with Ethernet port. You need a Thunderbolt to Ethernet adapter > http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap tor

  • Can I set up a Lasrejet pro M201-M202dw to use wireless and USB

    How can I set up my Lasrejet Pro M201-M202dw to be accessed by both USB and wireless
    This question was solved.
    View Solution.

    Hello @datfr 
    Thanks for posting on the HP Forums!
    I should be able to provide some help. If your LaserJet is already configured on the wireless network and added to the computer then all you need to do is plug the USB cable into the computer too.  If the printer is not WiFi yet ensure the USB is no plugged in yet and run the wireless setup for the printers.  Here is a link regarding Setting Up the Printer for a Wireless or Wired Network for the HP LaserJet Pro M201 and M202 Printer.... 
    Let me know how it goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Can't set fsb to 133mhz

    I'm using a k7t turbo(ms 6330 ver.3) motherboard and i have no idea how to set fsb to 133.  In the manual it shows a jumper called j17, but on my board there is no such jumper.  I tried setting the clock rate through the bios, but the highest i can get is 132mhz.  any help would be greatly appreciated.

    Go in the BIOS to the Hardware Monitor Setup page.  There are two entries that have to do with the FSB.  The first one is CPU FSB CLK.  You can only set this to 100 or 133.  The next is CPU FSB Overclocking.  This one adjust the FSB one at the time.  For running at 133 FSB use the first and check if the system is stable.  then if you must, overclock (or underclock).

  • K7N420Pro - can't set FSB to 133 after it was dropped to 100 for a while

    My configuration is
    MB K7N420 PRO,
    2xDDR PC 2700 256MB Samsung,
    AMD Athlon XP1600+
    For a long time the system was working on FSB/Mem/PCI as 133/266/66.
    Then for a while I've set it to 100/200/66 due to processor overheat (experienced troubles with cooler).
    Yesterday the system didn't start, and the bracket shows that the problem is the "early chipset initialization". I've tried some tricks, one of which was to set FSB jumper to 100MHz position (and this doesn't help).
    After I've removed one of the DDRs everything goes on. When I set the DDR back the system still works normally.
    But! When I set the FSB jumper back to user mode, which allows the FSB 133 - it doesn't affect, even though I've set the FSB back to 133/266/66 in BIOS setup.
    So now there is such a problem:
    - FSB jumper is in "user mode" position
    - BIOS shows FSB/Mem/PCI as 133/266/66
    - processor starts as Athlon 1050 Mhz (and Sandra shows that FSB is 100Mhz)
    What is wrong?

    The problem is that there is no reaction whatever I do with the jumpers!
    It just stack on the FSB 100.
    I've even flashed the BIOS from 2.6 to 2.8 thinking that something wrong is with it - still no effect...
    Changing memory modules one after one is useless too...
    What is the most strange that two days ago everything was fine...It just don't start one day. Some kind of mystic...
    Is there any way that I can supress that so-called "superstability" option ?

  • How can I set up my Mac Pro so that my wife and I can use our separate iTunes accounts? I keep getting an error message that the computer is already associated with an Apple ID even though the two accounts are associated with separate log ins!

    I'm getting very confused with setting up multiple user accounts on my Mac Pro for my wife and I. We each have a separate iTunes account, and we want to keep our music libraries seaprate. I've set up two user accounts on the Mac Pro and I have my iTunes authorised and logged into my user account on my user account. Under my wifes user account (i.e. a separate log in on the computer) I'm trying to set up her iTunes account, but I can't download or play anything from the cloud - it just says "This computer is already associated with another iTunes Account" and tells me that if I 'transfer' then I won't be able to use the other one for 90 days! This is really annoying as my wife can't access music she has purchased on her iTunes account on the home machine. We're not trying to do anything dodgy, just access our music on our own accounts on separate log ins on the same machine. Does anyone have any suggestions? Thanks!

    Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!

  • Help, can i set two clock displayed?

    is there any way i can set another timezone clock on the right top of the screen? like it displays yvr time and nyc time together? thanks.

    Hi,
    Yes, I dont think so too. However, you can set your widgets' time to different time zone. By using hot corner to activate widgets, I located the clock near the bar so that I can see both clocks at the same time (fortunately the widgets page is "semi-transparent" )
    Cheers.

  • How can I set up a Mac pro with internal Raid 5

    I have a Mac pro running Leopard server. I would like to format 3 of the drives as an internal Raid 5.
    Can this be done?
    Can it be done without an internal Raid card?
    or
    Can it be done if I install a Mac Pro Raid card?
    Thanks,
    RT

    RAID5 or RAID10 or such does require add-on software and / or add-on hardware, yes.
    And I'd tend to go toward external RAID storage here, as that is what the most common packages offer and as that tends to have the greatest expansion. This would involve a PCIe RAID controller and external storage here, though Apple does offer the Mac Pro RAID card for use with the internal drives.
    The integrated Apple software RAID has RAID0 and RAID1 capabilities. Not RAID5.
    As for any additional questions, here's [the FAQ|http://support.apple.com/kb/HT1346] for the Mac Pro RAID card, and here is [the manual|images.apple.com/server/docs/RAIDUtility_UserGuide.pdf].
    External RAID can involve Apple Xsan and Promise and related, or third-party FC SAN storage, or any of various third-party direct-attach storage (DAS) options.

  • How can I set up my macbook pro to recognize my new IPad mini?

    My macbook pro doesn't recognize my new IPad mini. Although I'm using Icloud for backup, my apps aren't syncing to the IPad. What setting am I missing.

    Device not recognized
    http://support.apple.com/kb/TS1591

  • Can I set up a Mac Pro as a server using OSX Server for my current Windows-based office?

    I have a small business, and our office currently has a Windows-based network.  I love my Mac and it's ease of use, and for now I have to use Remote Desktop to log on to my server, and then run my MRP/ERP business software from that.  Is there an Apple solution (Mac Pro?) for my server, where other users could run parallels to access the MRP/ERP software?  Thanks!

    It is possible - even quite easy - to turn almost any current or recent model of Mac into a server by installing OS X Server. It is less clear, however, that this will do what you want.
    What are the hardware and software requirements of your MRP/ERP software? If it will only run under Windows or any OS other than Mac OS X, then it will not work, and installing OS X Server will not change that.
    You may be able to get the MRP/ERP software to run under Windows run on a Mac using Parallels or VMWare Fusion, but it would still be running under the Windows OS, just virtualized so that it runs inside the Mac OS. Thus it will not be any easier to use than your current system, and in fact may be harder, and might not work at all.
    You could also run Windows under BootCamp, but again, while the Windows OS would be running natively, you lose any ease of use of the Mac OS.
    Best of luck.

  • Can't set clock

    I have problem with setting my clock. there is an errow:Uncaught exception:Index-1>=2
    because of that, i can't set alarm clock or set events in my calander.
    THANKS (-:

    Hi and welcome to the forumsy hafner!
    A couple of places for you to visit: Blackberry 101      Tips & Tricks
    Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc.
    Once your device has restarted, go to option-display-date and time-update time and set to "automatic"-BB key-save.  That will set your device to your network time.  Once that is set, you should then be able to set the alarm. 
    Let us know how it goes and it's great to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Nokia E51 - Can't set clock alarm tone

    Hey there people!
    My device is Nokia E51, and for some, bizarre reason, I can't set the clock alarm tone.
    When I choose the sub-menu "Clock alarm tone" a list of songs/audio files on the phone is supposed to load.... but nothing there. The phone doesn't even give me any options to choose from. I actually find this quite frustrating and annoying because I'm trying to do something very basic here.
    I've attached a capture.
    Thanks for helpers. 
    Solved!
    Go to Solution.
    Attachments:
    Screenshot0433.png ‏25 KB

    Well the reason I asked about the large number of audio files is because it appears to be a common bug across many of nokias phones.   When you have a large number of audio files (either on the card or on the phone itself) the phone apparently gets 'confused' and is unable to load up the selection of ringtones or music files to use as a ringtone.
    The only solutions would be to either:
    1)  Delete songs until the ringtone menu goes back to normal
    2)  Do what you have done with copying it to the phone then removing the memory card to be able to select the file.. then reinsert the memory card
    Nokia just needs to get their act together. They should seperate ringtones from the music files.  This way when you go to select a ringtone.. it will ask to either choose a ringtone from a list.. or to select one of your mp3s from a list. This way keeping it seperate.  But that would be extra menus to navigate and people probably wouldnt like it.
    But if they did it that way then they could use the mp3 listings by album, artist, song title, etc to allow people to choose the music files they want as a ringtone.  It would be easier to do that then continually scroll through huge lists
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Help! Can't overclock via CPU Ratio (multiplier) with K7T266 Pro (MS-6380)?

    I have a Athlon 1.2 GHz (266 MHz FSB) that I'm trying to overclock via the clock multiplier on my K7T266 Pro (MS-6380) mobo.
    Right now the CPU ratio is set to Auto in the Hardware Monitor in the BIOS, but I know that it's using a clock multiplier of 9 (9 x 133 Mhz = 1197 Mhz, which is about 1.2 Ghz)
    The only way that I can overclock this CPU is by increasing the FSB above 133 MHz.  That works, but I'd like to avoid that as the USB no longer works when the FSB is past 138 MHz (i.e. I can't OC higher than 1242 MHz through the FSB)
    If I set the clock multiplier above 9 (ex: 9.5, 10, etc.) nothing happens.  I reboot and my CPU is still at 1.2 GHz.  Its as if I can't OC by increasing the CPU ratio.  I'd like to set it to 10 and run at 1.33 GHz but I can't.  Why is that?
    If I lower my CPU ratio below 9, then the computer freezes up totally at bootup and I have to clear the CMOS to get it working again.
    THANKS!

    Hi,
    You need to unloack the CPU, search google for closing L1 Bridges, then you can set it to anything you want

Maybe you are looking for