Can't set memory or northbridge voltage
Hello, i have a MSI P35 Neo-F, and if i try to increase the memory or northbridge voltage just 0.1v, the board wont boot. I think the default vdimm voltage is 1.8 or 1.9, but my memory sticks require 2.2v. But my pc starts up fine and is stable when its 1ghz overclocked. Its weird because i looked in Dual Core Center and the memory voltage was @ 1.9v and the northbridge @ 1.25v at load, which is pretty low for a 1ghz stable overclocked system. Tried 2 different sticks but the board wouldnt boot with higher voltage with none of them. Is there a new bios or something to fix this? I havent flashed yet. It's not really a big problem, but i think i can get a higher overclock with more juice to the sticks and northbridge.
Hello Impetus,
please provide FULL system specs. Read the >>Posting Guide<< to get an idea of what we need to know.
Quote
which is pretty low for a 1ghz stable overclocked system
If your system is stable, the voltages are fine. Why increase voltages if there is no need to do so?
Quote
but my memory sticks require 2.2v
With JEDEC Standard Timings/Frequency no memory module should require more than 1.8-1.9V. 2.2V should only be necessary when timings are tightened to CL4. In any case, include the brand/model/typ of you modules in your system specs, otherwise it is hard to comment on that.
Similar Messages
-
Can I set different input range in different channel in cFP AI100
Dear Sir:
I have one question about the input range of cFP AI 100. Can I set different input range for different channel in one cFP? Also, can I set different input type (voltage or current) for different channel in one cFP? If yes, how? Thanks.
Best Regards.
FredHi Fred,
The answer to both questions is yes. In MAX, in the Channel Configuration Tab of your cFP-AI-100, you can specify your range to be one of a number of settings for current or voltage. To configure separate channels, simply select the channel and then select the range. See the attached screenshot for more details.
Regards,
Sean C.
Attachments:
FP Channel Configuration.bmp 2305 KB -
can I set my kids up under my apple ID but with separate accounts so they all have their own cloud memory?
YYes. https://www.apple.com/support/icloud/family-sharing/
BUt separate I'd for imessage, icloud and FaceTime. -
My wife and i share the same itunes account but we have separate libaries , can i set her up her own itunes log in to free up my icloud memory.
Hi tomgoggs,
iTunes purchases do not count against your iCloud memory space. See this article for what iCloud is used to store -
iCloud: iCloud storage plan overview
If you are having an issue with iCloud memory being full, you may want to use the steps in this article to help -
Manage your iCloud storage
Thanks for using Apple Support Communities.
Best,
Brett L -
Can I set 10 GB memory to NTFS read cache like CSV cache, or Stroage Space SSD Tier on Windows Server 2012 R2 ?
I want to use 10 GB memory to NTFS file system read cache for random read speed up.
CSV Volume have CSV Cache function,
Windows Server 2012 R2 Storage Space have SSD Tier function.
Regards,
Yoshihiro KawabataHi Yoshihiro,
There is no build-in system function which support to setup memory as disk cache. I know some third party software support this so you could have a search with related keywords (memory, hard disk cache).
If you have any feedback on our support, please send to [email protected] -
Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.
The iPad charger is dual voltage. You need only a plug adapter to be able to plug your US charger into a European wall outlet. A basic one costs about $2.00. - $6.00. Like this...
http://www.amazon.com/CVID-Grounded-European-Adapter-Adaptor/dp/B0098B5GN8/ -
K8N Neo2, can't set CPU voltage higher than 1,6V
I've a problem with the CPU voltage. I can not set it to 1,7V. When I change voltage in bios to 1,55+10%, monitoring shows only 1,6 (as with 1,45+10%) but not 1,7. When I leave only 1,55, monitoring shows that voltage is about 1,4-1,41... I tried different bios versions - 1.5; 1.7; 1.8; and it's the same with each version... Disabling C'n'Q or loading bios defaults doesn't help :-(
How can I fix this problem?Quote from: Sorrento on 16-June-05, 17:14:02
The DFI system is awsome... with two 6800GT's, even Gary did the same when I told him about it... hehe. Getting 88 fps in the Doom3 timedemo, around 299 fps in HL2 (159 is the minimum) with 1280x1024 with 4x FSAA and 16x Aniso and 21000 pts in 3dMark2003 and near 10000 pts in 2005. I love it, even if I am up to my neck in debt because of it... hehe
Only problem is the power usage, an Enermax 600w is not enough to power the system if I want to overclock the Venice 3200+ to more than 2.61 ghz... and I bet I can reach 2.8 ghz with only one video card
Too bad I can't quite afford that level of kit... yet. But I DO have a rather large freelance deal in the works & I might take the plunge! Otherwise, I may just settle for a Venice 3500 - I hear that some are able to get 300FSB out of them with a Neo2 Plat... So the "old" girl might have a bit of life left.... If I can get 275 with a Winnie now... 300 should be doable. I think SLI would be wasted on me right now though, since I just have a 19" monitor.
Never thought I'd hear that 600w isn't enough juice - that's "progress", I guess. Still, I wouldn't think that a Venice would need all that much power to go further than 2.6Ghz - I've seen article where they got 2.8 out of about 1.55 - 1.6v.... -
I can't set up iCloud drive on my iMac after upgrading to Yosemite
I can't set up iCloud drive on my iMac after upgrading to Yosemite - iPhone and iPad are updated but both say my iMac isn't (even though it is running Yosemite).
My iMac is OS X Yosemite 10.10 (14A389), memory is 4 GB 1333 MHz DDR3 and storage capacity is 273.64 free of 999.35 GB.
When i go to System Preferences and click on iCloud. The iCloud Drive section is greyed out and says setting up and a spinning pin wheel. It stays like this the whole time. I have tried restarting the computer. i amanita sure what else to do to make it work. Any suggestion would be great.I found another way to correct this...
1) Select Message, then go to Preferences,
2) a window will appear with 3 options, General, Accounts, Audio Video, don't be surprised when you see a video of yourself, your camera just turned on.
3) Select Accounts (you may have several here)
4) Select the account that has "iMessage" under the account name. This may likely be your Apple ID ****@me.com
5) Look at what is checked under the "You can be reached for messages at:"
6) Select the one account (or more if you like) and deselect the others
7) Close the window and the problem goes away.
I'm not longer getting my sons iMessages. -
How can I set the language when sending an e-mail with attachment - 'Html'?
"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
gt_html LIKE TABLE OF w3html,
doc_chng LIKE sodocchgi1,
objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
mail LIKE TABLE OF solisti1 WITH HEADER LINE,
reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = gt_abaplist
EXCEPTIONS
not_found = 1
OTHERS = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
html = gt_html
listobject = gt_abaplist.
doc_chng-obj_name = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = lv_line.
objpack-doc_type = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = mail
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C u0205| u0205u072C u0508 QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AMHi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul -
I have problem with setting my clock. there is an errow:Uncaught exception:Index-1>=2
because of that, i can't set alarm clock or set events in my calander.
THANKS (-:Hi and welcome to the forumsy hafner!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc.
Once your device has restarted, go to option-display-date and time-update time and set to "automatic"-BB key-save. That will set your device to your network time. Once that is set, you should then be able to set the alarm.
Let us know how it goes and it's great to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post. -
In my server RMAN can't allocate memory to the virtual instance
Hi
I want to restore my database in a new server
At first I want to restore "spfile" from controlfile autobackup, there is no spfile or pfile of my database in the new server
I do these steps
1 . expoer ORACLE_SID=Sales
2. rman target /
3. rman > set dbid 817528985
4. rman > startup force nomount
after step 4 I get this error :
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 09/22/2010 14:03:21
RMAN-04014: startup failed: ORA-04031: unable to allocate 28704 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","kebm test replies")
I get this error while I have about *80GB* free memory on the new server
and my parameters in /etc/sysctl.conf file is :
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.shmall = 5242880
kernel.shmmax = 42949672960
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 1048576
net.core.rmem_max = 1048576
net.core.wmem_default = 262144
net.core.wmem_max = 262144
I need to say that I can create a new database in that server by dbca that its
sga_max_size is 9632M and pga_aggregate_target is 3206M
Do you know what is wrong ? Do you know why RMAN can't allocate memory to the virtual instance ?
thanksThe database which could not start is because of the low memory on the system or in the sga_max_size there is high value set. So the system could not allocate so large memory as it does not have free so much. There may be other reasons like OS limitation in order of usage the memory.
Set a lower amount of memory in the database.
Eg:
SQL> alter system set sga_max_size=1600M scope=spfile;
System altered.
SQL> alter system set sga_target=1600M;
System altered.
refer the link it will be useful:http://arjudba.blogspot.com/2008/05/startup-fails-with-ora-27102-out-of.html
else use manually copy the spfile/pfile to the new server
refer the link, it may be useful to you.http://oracleinstance.blogspot.com/2010/08/disaster-recovery-using-rman-demo.html
Edited by: rajeysh on Sep 22, 2010 4:40 PM -
How can I set my "attach file" system to always show the date and offer to resort?
When I want to attach a file to an email, or save it for that matter, I have to turn on Details instead of List in the View Menu. How can I set Thunderbird to have Details on as my default.
Thanks!For use in the BB, the on-device format must be used...no PC contains the necessary file structure that the BB needs to find on the card in order to use it correctly. If you can no longer read the card via the BB nor the PC, then it's quite likely that your data is already destroyed. But, there are several PC utilities that claim to be able to recover Flash Memory devices such as SD cards...you should perhaps check those out (Zero Sum something or other? Can't recall specifically, but google will be your best friend in your quest.)
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Can I set the value of kernel paramaters less than default in Solaris 10?
Can I set the value of kernel paramaters less than default in Solaris 10? If specified less than default values for kernel parameters in /etc/system, system is getting default values for such as SHMMAX, SEMMSL, SEMOPM. Is the default kernel parameter values the minimum values in Solaris 10?
-YongYes, but not through /etc/system.
/etc/system is the old way to do it. As a backward compatibility, it will allow lines there to increase parameters but not decrease them. This is on the theory that many memory defaults were significantly increased, and older /etc/system setups were trying to increase small defaults, not decrease large ones).
Use prctl and set up a project.
Darren -
How can I set default values for Allocate Mode in AO config?
Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi 15 KBCreate two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha -
Can I set html input with digital
If I use html in iphone,Can I set the "input=text" only digital allowed,just like the keyboard number pad! Thanks!
Hi Fred,
The answer to both questions is yes. In MAX, in the Channel Configuration Tab of your cFP-AI-100, you can specify your range to be one of a number of settings for current or voltage. To configure separate channels, simply select the channel and then select the range. See the attached screenshot for more details.
Regards,
Sean C.
Attachments:
FP Channel Configuration.bmp 2305 KB
Maybe you are looking for
-
Error when running crystal report
i saw the error in log file 'Only TrueType fonts are supported. This is not a TrueType font' and 'Error while running Crystal report' Help me to fix this problem.Thanks inadvanced. I used some software developed in vb6.It changed some system font whe
-
Errror while configuring appserver for PS 8.49
Hi nicolas, My configuration 1. 2003 windows server 2. oracle 10g 3. weblogic 9.2 installed 4. people tool 8.49 5. peoplesoft hrms and campus solution DATABASE is PSDEMO.... database created as per given on ur blog part I, part II , part III below ER
-
Implement callback for an asynchronous BPEL process through Java
Hi , I am trying to implement a callback functionality for an asynchronous BPEL process through java. I found the code in the samples folder of SOA suite installation folder . <SOA_HOME>\bpel\samples\tutorials\102.InvokingProcesses\rmi\com\otn\sample
-
Hi,<BR>While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interesting
-
Structural Exception During Auto Imports In MDM
Hi All, We are facing a problem while auto importing bulk data. System is throwing structural exception and preventing data from importing automatically. Is there any way that we could identify which segment in XML is causing this structural exceptio