Can't set printer up wirelessly

Hello, I have Mac OS 10.7.1 and the HP Deskjet 3050 J610 and cannot set it up to print wirelessly from my laptop. Please help.

Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP 6300 all in one can't set up for wireless use

can't set up for wireless use

That is because the printer does not support wireless connectivity to a router. You can with an optional Bluetooth adapter to one computer wireless. However since this has an Ethernet connection you can connect it to your router via this or you can use the below information to convert your Ethernet wired printer to wireless.
Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

Can you set up a wireless network/router using only the iPad?

Can you set up a wireless network/modem/router using only an iPad - if you don't have a computer?

You actually can as most routers come with a web interface that lets you tinker with all things with regard to set up and connection.
You have to choose though as there are other routers that would require you to plug-it in to a computer first, as they have a desktop application to make way for easier set-up.
But for everything else, it is done through a web client which is just like accessing any web site.

Photosmart 7520--can't set up to wireless network

I set up photosmart 7520 on wireless network just fine out of the box. a few days ago I couldn't print to it and now can't reset up on wireless network to print. Help!!!

Hey jonathanray,
I see you are having an issue getting your printer to connect to your home network. This thread is about the Photosmart 7520. Is this the model printer you are working with?
You mention resetting the printer. Did you simply power cycle the unit to Hard Reset the device or what type of reset did you perform?
Have you tried restoring the network defaults of the printer to see if it can connect after performing a Hard Reset to all devices in the network connection?
Follow these steps to reset your HP printer, your wireless router, and your computer.
Press the Power button on the HP printer to turn it off.
Disconnect the power cord from the rear of the HP printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the HP printer.
Turn the printer back on.
Press the Setup menu option on the front panel of the printer
Select the Wireless submenu
Scroll to the bottom of the list and select "Restore Network Defaults"
Select Yes on the next screen
After performing these steps try connecting the printer again using the Wireless Setup Wizard in the Wireless submenu of the Setup menu again. Does this help get the unit connected?
What brand/model of router are you using? What is the name of the company that provides your internet service?
Let me know how this goes and the answers to these questions and I will do my best to provide continued support,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How can I set up a wireless network between two Mac Mini's (media centres)?

I've just received my second mac mini (core duo, 1.83, 1 Gb ram)and want to set up a wireless network to link this with my original mac mini (PPC 1.42, 512MB) and my Belkin wireless router (g std).
I'm using both as media centres in different rooms and want to keep all my media (films, photo's, music etc.) on one mini (connected to a 640GB external drive) and access it over the wireless network. Sort of a more felxible Apple TV setup??
I've got the wireless network working no problems with both mini's connected to the internet over the network but I'm stuck at how I get the two mini's to see each other. I've tried "the Missing Manual" and these forums but no success so far.
I know it can be done but would really appreciate any suggestions/directions on what to do?
Thanks in advance<<br>
MacMini PPC and MacMini Core Duo Mac OS X (10.4.9)

Jona11-
Greetings and welcome to the Apple boards.
This document should be very helpful.
Luck-
-DaddyPaycheck

Can I set 1 laptop wireless connect with static IP to WRT610N?

I have a WRT610N with 3 PCs wired and various wireless devices accessing. 1 of the wireless devices, running Windows 7, needs to run a static IP. Do/Can I set this up in the router or do I need to do in the PC?

You can use DHCP reservation in the router to assign a fixed IP address to the PC.
Or you can set the static IP address on the PC directly.

Can you set print from the samsung stratosphere mobil phone

Can you set up the mobil phone samsung stratospher to print to the hp officejet pro 8600?

Bettielittle118, Hope you are doing well and welcome to the HP forums.
Yes you shoud be able to print from the Samsung Stratosphere as long as is running Android
If what you want is to print from anywhere you must use HP ePrint go here to see how to start with this super free service.
This will give more control but it can be use only when the device and the printer are in the same network i.e. Home Network
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can't set printer as default. Error code 0x0000709

HP3510 Deskjet printer instaled on Hp laptop running windows 7. Cannot set printer as default. Error code 0x0000709. Removed old computer and software
This question was solved.
View Solution.

tgwright,
Thank you for the additional info. With the print and scan doctor not locating any corrupted software/driver problems its time to look to the operating system itself. Others who have had similar issues with the same error indicate a corrupted registry key causing the problem:
http://goo.gl/t94JG
http://goo.gl/uejgi
Beware these solutions indicate changing registry info (very dangerous if you do not know what you are doing). If you are not comfortable in the registry or have never been there before I would suggest seeking additional support in some fashion (Microsoft/Local IT/PC Repair service/etc).
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can I set up a wireless network with only certain units

Just want to set up some units not all

Not exactly sure what you are asking. Do you mean can the AirPort Express provide wireless for some wireless network clients but not all of them? If so, then the answer is yes. You can use the Timed Access feature and only allow wireless clients with the proper MAC address to connect.

Can I set up a wireless printer as a network printer and not use Airport?

I have a HP Photosmart Plus wireless printer set up in my network for use by several iPods, iPads, and iPhones. I have an iMac running 10.6.8 that I want to set it up on, but to use it as a regular network printer, not using Airport. Is this possible? I haven't been able to hit on the right combination of settings. I have a Samsung laser printer that works this way, and an Epson that is attached to an Airport Express, but all I get on the HP is garbage. It will work when I set it up using the HP install disk, but I have to use Airport and I don't always get a good signal where the iMac is located. I would prefer to use the wired connection to my router and access the HP's IP address, like a wired network printer. Any suggestions?

I'm using a Canon printer here which is networked via my Airport Express. My printer cannot be Wi fi enabled simultaneousely with an ethernet cable connection. It is either or. I realise that this doesn't fully answer your question, but I just wanted to give you a clue. You'd need to consult your owners manual, or HP to get a definitive answer.
If you want to use the HP printer printer only with the wired ethernet connection to your router, that should be no problem as long as it is ethernet capable.
After setting it up for wired ethernet capability, you will need through the sequence of powering your router down, and resetting you Lan network so the router and printer can pick up their respective IP assignments.

HT1424 Can you set up a wireless connection to a printer from a I pad

I like help about printing off a I pad

This article tells you how to set up AirPrint, and which printers are compatible:
AirPrint basics

Can't Connect Printer to Wireless - Insists the Right Password is WRONG!!!

Help!
My stupid HP Officejet Pro 8600 N911A Inkjet won't let me setup wireless printing on it....the 2nd time--
the FIRST time it worked great- easy peasy. Same password for the wireless router today as last time. It's a Verizon router, password's on the back, has *not* changed since i first set it up before, & it worked. wth.
Since i must set up wireless printing again, my idiotic printer software insists that the password is not possible because it's the "wrong length." (Has 9 characters.) Well, it worked GREAT last time, HP genius software writers!
This printer insists that my router password MUST be either 6 or 15 characters long. But it's not. It's 9 and it's what Verizon gave my landlord. Sorry. Now what?
Please help.... What on earth can i do to make my printer understand i am using a good password for my wireless network??
Thank you kindly...any and all!!

Hello!
First, thank you for the advice.
Last night i stayed up late fighting with this thing. I don't give up easily.
Before I received your answer this morning, found something that, oddly, worked.
Went into my Windows settings (I have 8.1) & tried to connect to my Office Jet 86100 directly from Windows by bypassing all HP software completely.
It worked - hooray. Printed the test page on the first try; then i went into Adobe & tried to print my auto insurance. Worked terrifically, no problem.
So then, I went back to the HP setup to see if it would stop acting crazy, since windows had gotten it to work.
At first, it said it couldn't connect when i turned the wireless off, then back on.
I went off and did something else.
When i came back, somehow, amazingly, the wireless indicator was blue, indicating excellent signal strength.
I i came back to the laptop and tried to install the HP printer software again. Doesn't make much sense, but it *finally* worked this time!!
The one problem i did have, when entering my printer's IP address in (which it asked for; either that or the network name, which was already showing up on the very same screen in the HP printer setup software) -- it would not take my printer's IP address at all. I typed it in correctly: 192.168.1.5. , periods in the right place and all. No matter what it said my IP address was configured wrong. WTH?
So, instead, even though it was plainy showing me the network name right there in front of my face, I typed the network name in instead of IP address. Worked first time.
So i think this HP printer software is buggy and SOME....BODY needs to debug it and re-release a fix. It just should not be this difficult to set up the same printer on the same laptop on the same network the second time.
Thanks.
I have copied and pasted your reply so in case my printer gets disconnected and I need to reconnect but it doesn't work again, before I bug you I'll try that.

Time Capsule can't set up as wireless network, but Airport Extreme works

I just bought a Time Capsule to use as a back-up hard drive and a wireless network. I currently have a Airport Extreme for my wireless network and it works fine. When I try to plug in the ethernet cable into the Time Capsule to set up a new wireless network - all I get is a blinking amber light on Time Capsule and Airport Utility can not find Time Capsule. When I plug the ethernet cable back into the Airport Extreme to see if my DSL is working - the Airport Extreme light is back on and I can connect to the internet. I updated the Time Capsule with the latest firmware so that's no it. Any ideas?

OK, thanks for the clarification.
First, make a note of the configuration settings in the Airport Extreme as you will likely set up the TC the same way. Open AirPort Utility, click on Manual Setup at the bottom of the pane and then click on the Airport icon at the top of the next page, which is a summary of your settings. Would be a good idea to write these down and keep them handy.
Then do a hard reset on the Time Capsule to get it back to factory defaults. You would do this by first pulling the power cable for a few minutes. Then using an unfolded paper clip or something small, hold in the reset button on the back while you plug the power cable back in and continue to hold the reset button for at least 10-12 seconds before you release it.
Power off your computer, then restart. When it's back up, connect an ethernet cable from the computer to the WAN port on the back of the Time Capsule. This should help Airport Utility "see" the Time Capsule so you use Airport Utility to configure it.
If you have set up the Extreme, the TC set up is basically the same unless you have changed the modem or some other things in your network.
Post back on your progress.

Computer can't find printer on wireless network

Hi
I have a HP laserjet pro 200 m276nw and it is connected to my WIFI, but when im tryin to add the printer under printers and faxes, it dosn't show. Windows just keeps seaching the network but it never showes. Does anybody have an idea about what's going on?
Im running windows 7 on my computer

Hey mortensmedegaar,
It sounds like you are trying to install the LaserJet Pro 200 M276nw via the Windows: Add a Printer feature. Have you tried installing the printer with the full driver software provided on the HP support website?
If not, then I would advise attempting to install via this software package. Before doing so I would advise a couple of steps to ensure the network is on a fresh start and the printer is recently connected.
Power cycle the router and wait for it to completely power back up before proceeding.
Power cycle the printer and restart the Windows 7 PC
Press the Setup menu button (looks like a gear and wrench)
Select the Network Setup Menu
Scroll down and select Restore Defaults
Once the defaults are restored, scroll up in the Network Setup Menu and select Wireless Menu
Run the Wireless Setup Wizard again to reconnect the printer for a fresh IP address from DHCP
Next try to run the install package for the printer from HP's support website. To download this driver one can click here.
As well, there is a troubleshooting document for if the M276nw is not able to be found during a wireless installation. The document can be located by clicking here.
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Can't set printer up wirelessly

Similar Messages

Maybe you are looking for