Can't set the time on the 6500 Slide

I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.

Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

How can i set the date time year to my i pod

how can i set the date time year to my i pod touch

Hello Theodora,
You can do this via your iPod's Settings application.
B-rock

How can you set the ctxsvr time interval ?

I would like to know how can i set the time
inteval between each update of the Intermadia
indexes.
Thanks.

stop and restart ctxsrv on specified intervals.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Lombar vincent ([email protected]):
I'd like to use the ctxsrv utility, because i want automatic index rebuild.
But Is it possible to set the time interval
between each update?<HR></BLOCKQUOTE>
null

Trying to create a book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time. how can i set the sorting

trying to create an Aperture book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time to place a photo. how can i set the sorting to stay in my manual setup?

1. If you manually sort Images in a Project, and then create a new Book w. "Include selected Images" checked, your manual sort order will be preserved.
2. As a workaround for when you have already created a Book, batch rename your Images with a leading index or counter after setting the order manually. You'll have to create a Naming Preset, e.g.: "{Index}_{Version Name}". The renaming should go in the order that you selected the Images, so be sure to select the first one first, and then use "Edit→Select all" to extend the selection to all Images. Once the Images are in your Book, a sort on Version Name should be the same as the manual sort you created.
3. At the risk of stating the obvious, you could create the Book, import the Images, and then sort them. The Book -- it is, to Aperture, just a special kind of Album -- retains its own manual sort order. I recommend using Albums this way. Use Projects to cull and develop Images, and use Albums for output. Sorting for a Book (or any output) is better done in the container devoted to that output (and not in the Project, which is more general).
Message was edited by: Kirby Krieger -- added #3.

HT201304 can i set the wifi to turn off at a certain time

can i set the wifi on an ipad to turn off at a certain time of day

Set the timer accordingly (tap to enlarge image)

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

Welcome to the Apple Community.
A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

How can I set the order of search engines on my Macbook?

When I use "Manage Search Engines" to rearrange the order of my search engines, the order changes temporarily, only to revert to the order the search engine add-ons were installed, the next time Firefox is restarted. How can I set the hierarchy of search engines to suit my preference, and have it stay that way?

It may be your preferences problem.
Try to Reset your firefox and try it newly
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How can I set the United States as my country when opening PSE 10?

How can I set the United States as my country when opening PSE 10 so I don't have to scroll down every time?

Why do you have to scroll down every time? You should only see the country window the very first time you launch PSE after installing it.

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Using MS Access Web App, can you set the tab order of the fields on a form?

Using MS Access Web App, can you set the tab order of the fields on a form? Doesn't appear to be a property. I don't see a programmatic method. I saw someone suggest using goto control on the after update event trigger but what if the person
doesn't edit the field? No event would be fired.
Jim

Hi Jim,
>>Using MS Access Web App, can you set the tab order of the fields on a form?
I am afraid you could not. In Web applications, the tab order is set automatically and cannot be changed.
(From
https://support.office.com/en-au/article/Set-the-tab-order-for-controls-3d7f749c-5a53-42b2-bb0e-2323fa044e2e)
>> I saw someone suggest using goto control on the after update event trigger but what if the person doesn't edit the field? No event would be fired.
The goto method is a workaround, but it should be triggered by a specific event. What I can figure out is changing the order of the fields.
If this is a feature you want to include in future versions of Access Web app, please submit a feedback as the picture below:
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can you set the Duration of a Transition to instant? Or Remove a previous?

Can you set the duration of a Transition to instant? (Rotate and Translate).
Or if not, remove a previous transition done? (Reset the transitioned object back to its original). Ihave tried setting Duration.millus(.000001), but I can still see it translate/rotate. if I set it to zero, it doesn't do anything at all.
Goal:
I have a Connect4 type grid that Flips. It rotates upside down 180degrees, the pieces 'fall' down. Then I ACTUALLY flip the game board (not just effects) using a matrix calculation. But since my grid is upside down, my pieces appear upside down.
So here is the method I was thinking:
-Flip the board upside down
-Translate the pieces down (gravity)
-Actually flip the game board's internals and positions.
-Undo the previous rotate/translate so the user thinks the 'animation' actually flipped the board.

You cannot create an instant Transition. An Animation with a duration of 0ms is considered invalid and does not do anything when play() is called.
Why do you have to use Transitions to set the values? They just modify Node properties over time, if you want to change the properties instantly, you can just access them directly. TranslateTransition modifies translateX, translateY, and translateZ, RotateTransition modifies rotate and rotationAxis.

Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back?

Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back? I asked this question before and was told to go to appearance and drag the fill and stroke around as if they were a layer, but this did not bring my stroke to the top of the image. Did I do this wrong somehow or is there another method?

Erin,
The default stacking order for an object with fill and stroke, such as a simple path, is that the stroke is on top and the fill is beneath it.
You may change that in the Appearance palette, but it should not be necessary.
Can you show a screenshot with the object and the Appearance palette and the Layers palette with the relevant (part of the) Layer expanded and visible?
If things are really wrong, you may start considering going down this dark road:
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I can not set the ringtone on my phone

I can not set the ringtone on my iPhone. All the time marimba sounds. Please help.

I have the same problem. My daughter's model is 4S and her 2 add-on tones are added above Marimba. My downloaded .m4r tones are visible in the IPhone library in the MAC OS X iTunes. On the IPhone 5 the ringtones are saved / synced in the Music box only. What is next step? Thx.

Guided access has Ben activated no password I can not get the red slider bar to shoe up when I hold the off and the home bottom down, it comes back to sarfri , I also tried over ten times to enter a passcode, but no go

Guide access has been activated, never set a pass word,I can not get the red slider to come up by holding the off and home button, tried entering a wrong pass word 10 time to reset it but it will not . Can only use Safari.

Step by step, how did you arrive at seeing this agreement?

Can't set the time on the 6500 Slide

Similar Messages

Maybe you are looking for