Can't set-up base station

I have a new mac mini and Powerbook G4. I plugged in Airport Graphite and tried to set up. Both computers recognize network, but cannot get to internet or see eachother. I went through Airport set-up and it recognizes network, but when I try to configure I get an error message saying it does not see base station. Tried resetting, swearing and thumping it. Any other suggestions?

After establishing a wireless network connection, you need to manually configure the device with the Airport Admin Utility. The Airport Setup Assistant provided with MacOS 10.4 doesn't work with this old base station.

Similar Messages

Can I set which base station a device communicates to on an extended Airplay network?

Can I set which base station a device communicates to on an extended Airplay network?

No, unless you connect to the device using a wired Ethernet connection.

How to make sure I'm the only one who can manage my airport base station using airport utility?

I know we have to use the Airport Utility application to manage the Airport base station in order to create a new network, creating the SSID and chosing the encryption mode and setting the password but how I could be sure I'm the only one who have access to those settings? A user of my network can install the Airport Utility application and change those settings. With other routers like D-Link, to have access to the settings you need to know the admin password to modify the settings. I can't figure out how we can do this with Airport Extreme base station. It's maybe obvious but I'm in the cloud for the moment.

You can set a base station administrator password in order to limit who can administer the base station. With AirPort Utility v6.x, you can set this password on the Base Station tab.

New MacBook Pro can't find the base station

I just bought a new MacBook Pro and AirPort Extreme Base Station. My house is wired for Ethernet so I plugged the Airport Exteme into one of the Ethernet outlets and did the set-up using my old iMac G5 over the network. (I had to download the latest software for the AirPort Extreme to the iMac before this would work right.) I finally got to the point where I got a green light on the Base Station, but when I search with the AirPort Utility on the MacBook Pro it can't find it, even when it is physically only 3 feet away. I then plugged the MacBook Pro into the AirPort Extreme with an Ethernet cable and it saw it - no problem. I then downloaded all the software updates to the MacBook Pro, restarted, unplugged the Ethernet and tried again. The AirPort Utility still can't find the Base Station. I am running 10.4.10 on both machines. I have 10.5, but don't plan un updating until I get this to work. I spent about half an hour listening to Muzak while trying to get to support and finally gave up. Any suggestions?

In another Mac OS X user account. Choose Log Out from the Apple menu and log into it. If you want to move them over, drag them to /Users/Shared/.
(65842)

Can an airport extreme base station attached to another airport extreme base station as an extender transmit a different network name and have it's own security?

Can an airport extreme base station attached to another airport extreme base station set up as an extender transmit a different network name and have it's own security?

No. The AirPort cannot extend another AirPort's wireless network and simultaneously broadcast its own wireless network.
It can however, be connected to another router (including another AirPort) by Ethernet, and then, be configured to broadcast a wireless network with another Network Name and Security Type.

Can i upgrade my base station with airport in mountain 10.8.5

can i upgrade my base station with airport in mountain 10.8.5

can i upgrade my base station with airport in mountain 10.8.5
Please check on the side or bottom of the AirPort Express to locate the model number. It will start with an "A" followed by four numbers.
If you have A1084 or A1088, you will not be able to administer these older versions using the iMac running OS X (10.8.5).
If you have model number A1264 or A1392, you can check to see if there are any available updates as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express icon
Click on the Version number that appears in the small window
You will be notified if an update exists for your AirPort Express

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

Can the AirPort Extreme Base Station be plug-in to the power forever?

Hi,
sorry for my english but this is my question: Can the AirPort Extreme Base Station be plug-in to the power (electricity) forever? I mean, I don't have to un-plug the Base Station sometimes? Thanks
Alvaro

Sounds more like an issue with your router and
network than a problem with AEBS.
Which router?
I certainly do not need to reboot my AEBS like that,
I think I have rebooted it once in two years!
I would start a new thread describing your network in
more detail and the issues with the AEBS.
Thank you, but my diagnosis is the result of many days
of experiment with about hundreds of users. It's a bug,
I know were it is. It was reported to Apple in september
(2005).
It isn't that easy to upgrade at the same time all the
wireless (802.11b and 802.11g) that do have to interoperate
smoothly within the same space.
I don't think anyone need to waste more time on these
bugged firmware versions (5.6 & 5.7) as I already explained
it. They work smoothly just in a limited environment
which they were conceived for: one Mac connected to one
AEBS connected to one FAI.
You can't recommand these version to colleagues who have
to live in a real world with other wireless equipment
(a Mac not updated, an ABS not updated,
a Cisco wireless card emitting to 100 mW and smashing all
the neibourhood, a pre 802.11g+ card using 2 channels at
the same time...).
dan

Internet connection works but I can't see the base station

My internet connection is OK (I'm able to surf and get e-mail) but I can't see my base station on just one of my computers. It shows up in the others, so I don't think it's a problem with the AEBS. I've tried re-installing the Airport Utility software, repairing permissions, etc. but it just keeps saying it can find a base station. Any ideas?

OK, thanks for the clarification.
If you haven't already tried this, connecting an ethernet cable from your computer directly to one of the LAN ports on the base station will usually allow AirPort Utility to "see" the device.
You may need to restart the Extreme and your computer as part of the sequence.
And sometimes, the device will just "appear" after 10-15 minutes or so after a restart. I have no idea why this is.

Can't read the base station configuration

I just set up my AirPort Express using the Airport Utility, connected to Comcast high-speed Internet service. for some strange reason, the base station still has the "amber light blinking," while I seem to have no trouble with Internet connection (I'm on right now). but when I opened the utility again to set up Airtunes, I get the message, "reading base station configuration" then it fails. clearly, the base station is plugged in, connected to the Ethernet, and the signal's working... so what is going on? can somebody help?

Perhaps you configured your Airport Express into "bridge mode" by disabling its ability to distribute IP addresses. That would explain most of the symptoms you describe.
I suggest:
1. do a hard reset of the Airport Express by following the instructions found at:
http://docs.info.apple.com/article.html?artnum=108044
2. with the Airport Express cabled to the cable modem, pull power to both devices. Wait at least five minutes - longer if you are patient. Then plug power into the modem and wait a minute. Then plug the Airport Express into power and wait for it to restart. Unless your Airport Express gets a solid green status light at this point, you really cannot proceed further - so try this step over again but waiting longer than you did previously before plugging the cable modem back into power.

Unable to set up base station as wireless client

I have a network with one Airport Extreme (UFO-shape) and three Airport Express base stations. Now I had to do a hard reset of all the base stations, and want to use Airport utility to set up the network again.
I have no problems setting up the Airport extreme as the main base station, and the first Airport express as a remote base station (extending the network). I want to set up the other two Airport Express stations as wireless clients (I only use them for iTunes via Airtunes).
My problem is that when I reach the point where I can choose between setting them up to either extend the network or as a wireless client, I am not able to proceed if I choose the latter (nothing happens when I press "continue"). I can only go through the setup process if I choose the Airport Express to be an extension of the network (a remote base station).
For one of the Airport express, I then later manually changed the setup from "be a part of a WDS network" to "connect to a wireless network". But when I try this for the last Airport Express, I am no longer able to contact the base station if I try to do the same. I have chosen channel 11 for the network, and I think in some way or another, after I manually change the settings for the last Airport express, it switches to another channel. After this I can no longer read the base station configuration or connect to it via airtunes.
When I do a hard reset again, and go through the process once more, everything is OK as long as I keep it as a remote base station. But I really would like it to be connected as a wireless client
Any ideas?

The basic wiring setup would include connecting an Ethernet cable from one of the available LAN <-> Ethernet ports to the WAN "O" port on the Time Capsule.
You can run an Ethernet cable up to 100 meters or 300+ feet so the trick will be locate the Time Capsule in the middle of the area where you need more wireless signal coverage.
To have the Time Capsule "extend" the wireless from the gateway, you would need to configure it to create a new wireless network using the same wireless network name, same wireless security setting and same password as the gateway's wireless network.
The final configuration step would be to make sure that the Time Capsule is setup to operate in Bridge Mode, so that it will function as a client for the gateway router.
The specifics of how to do this will depend on the version of AirPort Utility that you are using on your Mac. Post back if you need more details on this.

Airport Base Station - setting up base station to already existing network

Hello,
I just replaced a network switch on the network. Since I did that I am unable to get Internet connection from our main base station in the server room that distributes the IP addresses. I did a reset to the base station and tried to get it to show on the already existing network, but I'm having some issues getting the base station configured with the other base stations on the network. How do I get this main base station to show up on our network?
Right now our other base stations are not getting valid IP addresses. The base station that is setup to distribute IP addresses is getting valid addresses from our provider. If someone could give me any suggestions I would appreciate it.
We are running Apple 10.2.4 on our network.

OK - starts to make sense now. If you did a factory reset of the base station then more than likely the airport network name for it is the Apple default name, and you probably lost the WDS in Wireless Mode.
Do you know the old network name and the network password? Do you know how the other 4 or 5 base stations were configured - ie as a WDS network and whether as relay or remote base stations. You should not need to change anything on these base stations if you know how your AEB (main) was setup in the first place.
One step back from this, you need to confirm that the DSL modem is connecting to your ISP. Connect the ethernet cable from the DSL modem to your Mac and confirm that you can log onto your ISP or internet. If it works then lets go onto the AEB you reset.
Apple publish setup manuals for their AirPort Base Stations - they can be downloaded at: http://support.apple.com/manuals/#airport
1. Reset your AEB to its factory default again.
2. Turn-off the AEB and connect one of its ethernet ports to your Mac by ethernet cable, and connect the DSL modem to the WAN port on the AEB by ethernet cable.
3. Power up your Mac, the DSL modem and the AEB and wait for all to complete their startup sequence. Then open AirPort Utility - you should see your AEB under a generic network name. Click on the AEB.
4. Use the auto setup procedure by clicking 'Continue'. Follow the onscreen instructions for setting up a new network. When asked, use the 'original network name' for your school network. When asked for a network password, use the 'original network password' for your school network (what sort of network security were you using - WPA2 Personal - use whatever you had previously.
5. At some stage you will also be asked to give the AEB a name and admin password - use whatever they were previously.
6. When the setup procedure is complete and the AEB finishes restarting, the AEB will reappear in AirPort Utility. Click on the AEB and click 'Manual Setup'. You may be asked for the admin password to get into the configuration profile.
7. Click on the 'Wireless' tab and set the 'Wireless Mode:' to 'Participate in a WDS network' if not already set to this. While in this pane, look at 'Channel:' - do you remember what this was set to previously (if not, you may need to connect one of the other AEBs by ethernet cable to a Mac and use AirPort Utility to check the Channel setting.
8. Now, click on the 'Internet' icon at the top of AirPort Utility. Check that 'Connection Sharing:' is set to 'Off (Bridge Mode)' - if not, change it.
9. Now, click 'Update' and wait for the AEB to restart.
10. Now, disconnect the ethernet cable from the Mac to the AEB ethernet port.
11. Open Airport Utility, and hopefully, you can now see the AEB and the other 4 or 5 base stations.
Let us know what happens.

Airport Utility can't find my base stations

I've got an Airport Extreme base station with a printer connected to it - all three of my Macs print to it wirelessly.
Now I'm trying to set up an Airport Express elsewhere in the house for AirTunes. But Airport Utility doesn't see my AE... in fact, it doesn't see the base station either, from any of my computers. I've reinstalled Airport Utility, tried using older and newer versions, and I've never had problems setting up networks before.
I took the AE to a Genius Bar, and it worked right away. So what's going on that I can't set it up on my own (otherwise working) network?

I just had this issue with a Refurbished unit I recently purchased and had to reset the AEX to factory settings.
How long did you wait? Sometimes it takes a while for all the stations to show up in the list.
If nothing else works, you can connect the AEX via ethernet cable.
Click here for more information on joining an AEX to an existing network.

Airport Admin Utility, iTunes, Airfoil can't see AE base station

I know this is not a new topic, but I can't find an answer in any of the other threads. With other users the problem seemed to "magically" go away. I have not been so lucky yet.
Airport Admin Utility can't see my AE base station but I can find it using "other" and typing in the IP address. I was able to update the firmware to 6.3 (again using "other" and typing in the IP address since the fw updater couldn't see it either). I can see it (with it's name displayed) with my router software. However, it does not show up in iTunes or Airfoil either.
The base station is connected via ethernet to my home network. I tried rebooting the computer, restarting the base station, I also tried a hard reset on the base. I do not have "distribute ip address" checked. I do have "enable Airtunes" checked. The firmware on my Linksys router is up-to-date and not a hack. I'm running OS X v10.4.5 on a Dual 1.42 GHz PowerMac G4.
Thanks in advance.
Dual 1.42 GHz PPC G4, 1.42GHz Mac Mini Mac OS X (10.4.5)

okay, I connected the AE base directly to the PowerMac with the ethernet cable and it showed up in everything (Airport Admin Utility and iTunes). So I guess my problem is with the router. What do I do now? This router is only a couple of months old.
When you suggested I disable DHCP, did you mean in the AE settings or on my router? As I mentioned initially, I do not have "distribute ip addresses" set up on the AE base. After reconnecting the AE base to the router, I tried disabling DHCP on the router and that didn't fix the problem.

How can I change the base station my airport express connects to?

I just added a new AirportExpress to my wireless network and am using it to extend the range of the network and for AirPlay. When setting it up I selected the main base station that provides the wireless network when asked to select a device for it to connect to. However, now when I view it in Airport Utility, it's the only device on the network that has only Good signal strength rather than Excellent. There is another AirportExpress conencted which has Excellent signal strength that is the closest access point to this new AirportExpress.
How can I change the setup using Airport Utility so that that's the device that it's using to connect to the network?

With a Mac using the Airport Utility.
With a PC using the Airport Utility you can install on your PC with the install disc included.

Can't set-up base station

Similar Messages

Maybe you are looking for