Can't Set Up Fujitsu ScanSnap fi-5110EOXM

I am getting "Open Configuration Error", "General Error Occurred" messages when I try to open the settings for the ScanSnap Manager. The software is recognizing the scanner and the manager is listed as a Login Item. Since all I see are good reviews for this scanner and Mac OSX, I am wondering if the problem is new to 10.4.6 or if there is a conflict with Scan Tango or other scanner software.
Any ideas would be appreciated. Fujitsu support was only able to offer reinstall of the software from their ftp site.
Thanks.

don't know if you've worked this out already but i just got the scanner yesterday and installed the drivers that came with it with no problem. have you checked to see if you have the latest drivers?

Similar Messages

Am I licensed to use the Acrobat Standard XI bundled with Fujitsu ScanSnap SV600 Scanner in business environment?

Dear Sir/ Madam,
Am I licensed to use the Acrobat Standard XI bundled with Fujitsu ScanSnap SV600 Scanner in business environment?
I just bought a Fujitsu ScanSnap SV600 Scanner. It comes with an Acrobat Standard XI and a product key. My understanding is that many Adobe product licence keys (e.g. educational version, home use version) are not allowed to use in business environments. My bundled Acrobat Standard XI does not state that it is limited for educational or home use on the CD. Am I licensed to install it in my office computer for business use? Is there anyway for me to review the licensing conditions of my product key?
Thank you very much for your advice in advance!
William

Adobe software purchased appropriately can be used in any environment the licensed user has. There is no restriction (at least in the USA) on educational customers using the educational license for professional use. I am unaware of any home use versions of Adobe software. There are versions of Adobe software that are directed toward non-professionals (for example Premiere or Photoshop Elements), but there are no restrictions to using in a business as long as it is used by the person it was purchased for (one license-one user). Years ago other countries had different license agreements, but in today’s environment, I do not believe that is the case for current versions of Adobe software. So, yes you can use it in your business. In fact, Fujitsu Scanners like the ScanSnap are geared towards the business user. I am a very happy user of their 1500M scanner (which while designed for a Mac, came with Acrobat Standard software :-)

How do I scan directly into Lightroom from Fujitsu Scansnap

I want to scan archival family photos into Lightroom directly from my Fujitsu Scansnap ix500.
Can this be done?
Thanks!
/john

Lightroom does not have any provisions to work with a scanner. You will need to use other software to scan your images and store them on your hard drive. Then you can import them into Lightroom from there.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?

My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?

Good question, but I'm 99.9% certain the answer is "no". Here are some considerations:
Think of the heritage of iOS. It really started with iPhones and maybe iPods. These devices cost a whole lot less than a Mac. They are generally not thought of as shared (with exceptions, of course, as is true for you).
Think of the backup process. i-devices typically sync with one iTunes on one computer. How would an i-device with multiple users enstantiate this?
Anyway, all this is to say I'm convinced you cannot do what you're inquiring about.

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

Can you set a "default" web page in a KM folder?

Hi there,
I've been playing around with using Adobe Contribute to edit web pages in a CM Repository. It was easy to create a CM repository, put some web pages and supporting CSS, images etc. in there, and create a KM navigation iView that displays the default page. Setting up Adobe Contribute to edit those pages via a WebDAV protocol was simple too, and to be honest I find the Contribute interface and functionality easier to use (particularly from the average end user's point of view) and implement than the Portal's built-in HTML editor, or the Web Page Composer.
But then I ran into a snag. In order to be able to "administer" the site with Contribute (or Dreamweaver), it creates an _mm folder and puts a "guard" page in it. The guard page is a file which would be returned to the browser when it tries to access a folder. In a normal website that would be a "default" page (e..g index.htm, default.htm etc.), but in the Portal there doesn't seem to be a way to have one. I believe that's why if you try to access a folder through a browser you get:
"The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work."
That's what happens if I use something like http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/ as a URL, though http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/default.htm works just fine (as you would expect). And I can retrieve a fake "guard" page using http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/_mm/default.htm
An Adobe technote confirms this as problem - [Guard Page not found|http://go.adobe.com/kb/ts_f3675780_en-us]. Does any one know if a default page can be set in a CM repository.
Regards,
Tom

I don't think you can.
What is possible is to set content on the folder resource itself; that would be returned instead of the page you mentioned.

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

Can't set up irssi colors

I'm feeling really... stupid. I just can't set up irssi colors, almost ashame for asking advice on this
Here's my theme (just cloned the default theme):
# When testing changes, the easiest way to reload the theme is with /RELOAD.
# This reloads the configuration file too, so if you did any changes remember
# to /SAVE it first. Remember also that /SAVE overwrites the theme file with
# old data so keep backups :)
# TEMPLATES:
# The real text formats that irssi uses are the ones you can find with
# /FORMAT command. Back in the old days all the colors and texts were mixed
# up in those formats, and it was really hard to change the colors since you
# might have had to change them in tens of different places. So, then came
# this templating system.
# Now the /FORMATs don't have any colors in them, and they also have very
# little other styling. Most of the stuff you need to change is in this
# theme file. If you can't change something here, you can always go back
# to change the /FORMATs directly, they're also saved in these .theme files.
# So .. the templates. They're those {blahblah} parts you see all over the
# /FORMATs and here. Their usage is simply {name parameter1 parameter2}.
# When irssi sees this kind of text, it goes to find "name" from abstracts
# block below and sets "parameter1" into $0 and "parameter2" into $1 (you
# can have more parameters of course). Templates can have subtemplates.
# Here's a small example:
# /FORMAT format hello {colorify {underline world}}
# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; }
# When irssi expands the templates in "format", the final string would be:
# hello %G%Uworld%U%n
# ie. underlined bright green "world" text.
# and why "$0-", why not "$0"? $0 would only mean the first parameter,
# $0- means all the parameters. With {underline hello world} you'd really
# want to underline both of the words, not just the hello (and world would
# actually be removed entirely).
# COLORS:
# You can find definitions for the color format codes in docs/formats.txt.
# There's one difference here though. %n format. Normally it means the
# default color of the terminal (white mostly), but here it means the
# "reset color back to the one it was in higher template". For example
# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would
# print yellow "foo" (as set with %Y) but "bar" would be green, which was
# set at the beginning before the {foo} template. If there wasn't the %g
# at start, the normal behaviour of %n would occur. If you _really_ want
# to use the terminal's default color, use %N.
# default foreground color (%N) - -1 is the "default terminal color"
default_color = "-1";
# print timestamp/servertag at the end of line, not at beginning
info_eol = "false";
# these characters are automatically replaced with specified color
# (dark grey by default)
replaces = { "[]=" = "%K$*%n"; };
abstracts = {
## generic
# text to insert at the beginning of each non-message line
line_start = "%B-%n!%B-%n ";
# timestamp styling, nothing by default
timestamp = "%K$*%n";
# any kind of text that needs hilighting, default is to bold
hilight = "%_$*%_";
# any kind of error message, default is bright red
error = "%R$*%n";
# channel name is printed
channel = "%_$*%_";
# nick is printed
nick = "%_$*%_";
# nick host is printed
nickhost = "[$*]";
# server name is printed
server = "%_$*%_";
# some kind of comment is printed
comment = "[$*]";
# reason for something is printed (part, quit, kick, ..)
reason = "{comment $*}";
# mode change is printed ([+o nick])
mode = "{comment $*}";
## channel specific messages
# highlighted nick/host is printed (joins)
channick_hilight = "%C$*%n";
chanhost_hilight = "{nickhost %c$*%n}";
# nick/host is printed (parts, quits, etc.)
channick = "%c$*%n";
chanhost = "{nickhost $*}";
# highlighted channel name is printed
channelhilight = "%c$*%n";
# ban/ban exception/invite list mask is printed
ban = "%c$*%n";
## messages
# the basic styling of how to print message, $0 = nick mode, $1 = nick
msgnick = "%K<%y$0%n$1-%K>%n %|";
# message from you is printed. "msgownnick" specifies the styling of the
# nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the
# whole line.
# Example1: You want the message text to be green:
# ownmsgnick = "{msgnick $0 $1-}%g";
# Example2.1: You want < and > chars to be yellow:
# ownmsgnick = "%Y{msgnick $0 $1-%Y}%n";
# (you'll also have to remove <> from replaces list above)
# Example2.2: But you still want to keep <> grey for other messages:
# pubmsgnick = "%K{msgnick $0 $1-%K}%n";
# pubmsgmenick = "%K{msgnick $0 $1-%K}%n";
# pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n";
# ownprivmsgnick = "%K{msgnick $*%K}%n";
# privmsgnick = "%K{msgnick %R$*%K}%n";
# $0 = nick mode, $1 = nick
ownmsgnick = "{msgnick $0 $1-}";
ownnick = "%_$*%n";
# public message in channel, $0 = nick mode, $1 = nick
pubmsgnick = "{msgnick $0 $1-}";
pubnick = "%N$*%n";
# public message in channel meant for me, $0 = nick mode, $1 = nick
pubmsgmenick = "{msgnick $0 $1-}";
menick = "%Y$*%n";
# public highlighted message in channel
# $0 = highlight color, $1 = nick mode, $2 = nick
pubmsghinick = "{msgnick $1 $0$2-%n}";
# channel name is printed with message
msgchannel = "%K:%c$*%n";
# private message, $0 = nick, $1 = host
privmsg = "[%R$0%K(%r$1-%K)%n] ";
# private message from you, $0 = "msg", $1 = target nick
ownprivmsg = "[%r$0%K(%R$1-%K)%n] ";
# own private message in query
ownprivmsgnick = "{msgnick $*}";
ownprivnick = "%_$*%n";
# private message in query
privmsgnick = "{msgnick %R$*%n}";
## Actions (/ME stuff)
# used internally by this theme
action_core = "%_ * $*%n";
# generic one that's used by most actions
action = "{action_core $*} ";
# own action, both private/public
ownaction = "{action $*}";
# own action with target, both private/public
ownaction_target = "{action_core $0}%K:%c$1%n ";
# private action sent by others
pvtaction = "%_ (*) $*%n ";
pvtaction_query = "{action $*}";
# public action sent by others
pubaction = "{action $*}";
## other IRC events
# whois
whois = "%# $[8]0 : $1-";
# notices
ownnotice = "[%r$0%K(%R$1-%K)]%n ";
notice = "%K-%M$*%K-%n ";
pubnotice_channel = "%K:%m$*";
pvtnotice_host = "%K(%m$*%K)";
servernotice = "%g!$*%n ";
# CTCPs
ownctcp = "[%r$0%K(%R$1-%K)] ";
ctcp = "%g$*%n";
# wallops
wallop = "%_$*%n: ";
wallop_nick = "%n$*";
wallop_action = "%_ * $*%n ";
# netsplits
netsplit = "%R$*%n";
netjoin = "%C$*%n";
# /names list
names_prefix = "";
names_nick = "[%_$0%_$1-] ";
names_nick_op = "{names_nick $*}";
names_nick_halfop = "{names_nick $*}";
names_nick_voice = "{names_nick $*}";
names_users = "[%g$*%n]";
names_channel = "%G$*%n";
# DCC
dcc = "%g$*%n";
dccfile = "%_$*%_";
# DCC chat, own msg/action
dccownmsg = "[%r$0%K($1-%K)%n] ";
dccownnick = "%R$*%n";
dccownquerynick = "%_$*%n";
dccownaction = "{action $*}";
dccownaction_target = "{action_core $0}%K:%c$1%n ";
# DCC chat, others
dccmsg = "[%G$1-%K(%g$0%K)%n] ";
dccquerynick = "%G$*%n";
dccaction = "%_ (*dcc*) $*%n %|";
## statusbar
# default background for all statusbars. You can also give
# the default foreground color for statusbar items.
sb_background = "%4%w";
# default backround for "default" statusbar group
#sb_default_bg = "%4";
# background for prompt / input line
sb_prompt_bg = "%n";
# background for info statusbar
sb_info_bg = "%8";
# background for topicbar (same default)
#sb_topic_bg = "%4";
# text at the beginning of statusbars. sb-item already puts
# space there,so we don't use anything by default.
sbstart = "";
# text at the end of statusbars. Use space so that it's never
# used for anything.
sbend = " ";
topicsbstart = "{sbstart $*}";
topicsbend = "{sbend $*}";
prompt = "[$*] ";
sb = " %c[%n$*%c]%n";
sbmode = "(%c+%n$*)";
sbaway = " (%GzZzZ%n)";
sbservertag = ":$0 (change with ^X)";
sbnickmode = "$0";
# activity in statusbar
# ',' separator
sb_act_sep = "%c$*";
# normal text
sb_act_text = "%c$*";
# public message
sb_act_msg = "%W$*";
# hilight
sb_act_hilight = "%M$*";
# hilight with specified color, $0 = color, $1 = text
sb_act_hilight_color = "$0$1-%n";
It's almost the way I want it, but a couple of things:
- I want everyone nickname but mine in gray
- I want the join/quit text (... has joined/quit) in gray
- I want the mode (@, +, etc) in yellow
I tried to format the text according irssi site, but without luck.
For example tried this to change others nickname color:
pubmsgnick = "{msgnick %y$0%n %K$1%n-}";
pubnick = "%K$*%n";
and this for the quit msg
# mode change is printed ([+o nick])
mode = "{comment %K$*%n}";
# nick/host is printed (parts, quits, etc.)
channick = "%c$*%n";
chanhost = "{nickhost %c$*%n}";
all without any luck. Also tried to put the format strings outside the curly braces, with the same result. I've been editing the config file for a while now, not sure what other information could you possibly need.
I know it's not a big deal, I stil can use the program with no hassle, but it would really be nice to set the colors like that, to help me distinguish between lines.
Thank you for reading, and sorry for my lousy english

Nobody can tell you anything without proper system info or other technical details.
Mylenium

I can't set up voice mail on my iphone 5s. And can't merge calls either

I can't set up voice mail box on my iphone 5s .
And I can't merge calls .

Both of those functions are carrier dependent so you may want to contact your cellular carrier.

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

HT4053 can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

No, but you do not need iTunes to setup a new iPhone 5s. Create an iCloud backup for anything you want to transfer to the new iPhone.

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

Crystal Report with text(csv) data file, can we set it as input parameter?

Hi,
I am a new user of Crystal Reports 2008.
I have created a report with charts in it. The input data comes from a csv text file.
Can I set the name of this text file as an input parameter?
as I need to generate 44 similar reports with different text filenames(and data)?
Thank you.
Regards

Brian,
Thanks much.
I did exactly what you said.
Just to see any change, I first gave a bad report file name just to see if I am accidentally pointing to a different file,
but I got an error saying report not found.
Then I renamed my original datafile name and generated a report and it still generated one without giving an error.
Then I also gave a junk name to the logoninfo and printed that name, the new name was assigned to logoninfo, but the code did not error out.
It ended up generating the report.
Now here is what I think is happening,
1) The save data in report option seems to be still on even though I have turned it off in 2 locations
a) file -> Report Options
b) file -> Options -> Reporting tab.
2) For some reason the logoninfo is getting ignored as well.
Since I did not see any answers yesterday I posted a link to this thread on the .Net forum
Crystal Report with text(csv) data file, can we set it as input param? C#
and Ludek Uher says that I am connecting to the text file via a DAO database engine and so need to use the same code for changing the text file as for changing an Access database.
But the link he gave me tells me to try the same thing that we have been trying..
Here is my plan,
1) I will first try and find out why my save data with report option is still on ( but it shows off in Crystal ).
2) why is LogonInfo getting ignored.
Meanwhile any suggestions from anyone are welcome.

Can't Set Up Fujitsu ScanSnap fi-5110EOXM

Similar Messages

Maybe you are looking for