CAN'T SET UP INTERNET CONNECTION WIRELESS WITH EA6500 AC1750

GOOD AFTERNOON EVERYBODY. MET A PROBLEM WITH MY NEW ROUTER. I DID TRY TO CONNECT MY PC WINDOWS 8 WIRELES. IT'S SHOWS CONNECTED TO ROUTER BUT ACCESS LIMITED, NO INTERNET CONNECTION. ANY IDEAS HOW TO RESOLVE THIS PROBLEM? I FOUND SOME INFORMATION THAT IT'S WORKS, BUT HOW?? MY LAPTOP WINDOWS 7 WORKS FINE, IPAD TOO. THANK YOU FOR ANY HELP.

Hi ivan.kishkin, were you prompted for the password when you tried to connect the PC wirelessly to the router? Did you make sure to type it in correctly? You may actually try to remove preferred networks on the computer also and reconnect to the wireless network. You may refer to this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=85537a14b0214be48217c733bba9ac65_Removing_Wireless... and use the steps for Windows 7. Usually that helps.

Similar Messages

Internet connection lost with EA6500 router

I'm using a fiber optic internet connection and a Linksys/Cisco EA6500 router, with unlimited internet plan. Usually (1 to 2 days), the internet connection is lost and the way to get it back is the radical way in IT: 1st: switch off the modem and the router and wait a couple of minutes; 2nd : switch on the modem and the router. I suspect that this very annoying problem is related to the router settings. Someone can help me in get over this problem?
Thanks in advance.
Nuno

With this type of scenario, this will show that a reset on the router is needed to stabilize the router’s performance. One isolation step that you can try is to connect the computer straight to the modem. In that way, you will be able to determine if the connection coming from the modem is stable. Another step that you can try is to adjust the router’s mtu size by using this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efe3edfeced9436a9f13eeebc89f90c2_4031.xml&pid=80&r.... By doing so, the router’s intermittent internet connection problem can be resolved. If in case that those steps will not improve the router’s internet connectivity, then you can consider returning and have that router replaced.

Why can't i get internet connection on my blu players with my airport express?

why can't i get internet connection on my blu ray players with airport express?

Hello there, sheilafromfra.
The following Knowledge Base offers up some great steps for troubleshooting the Wi-Fi issue on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Can I set up my macbook pro with an ethernet connection?

can I set up my macbook pro with an ethernet connection?

MacBooks Pro with Retina display don't come with Ethernet port. You need a Thunderbolt to Ethernet adapter > http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap tor

Another Internet connection problem with solariis dev express

I have the same problem, i was installed new solaris dev express , my ifconfig output detects my nic
and my name nic is nge0, but i dont connect to internet.
i was reading this forums but the result is null.
i have a cable modem and i using a ethernet connection.
i use this command:
*#ifconfig nge0 dhcp start*
the result is null the dhcp doesnt assing an ip to my nic
then i create a */etc/hostname.nge0* file and follow comments that i seeing on this forums
*#uname -n > /etc/hostname.nge0* ...too i create a */etc/dhcp.nge0*
again i wrote:
*#ifconfig nge0 dhcp start*
but no , the result is null
then i follow more comments on this solaris forums and i added the dns in */etc/resolv.conf*
but the result still null
later i check the gateway using the comand
*#netstat -nr*
but only i see my loopback ip --> 127.0.0.1
too i used the command
*#sys-unconfig* , reboot ..mmm no
but still the same problem
my question is how to set the internet connection using a cable modem that workkssss!!!!!!!?
my computer is a 32bit machine with solaris devexpress and my cable modem.
how to tell to solaris which is my gateway?
i know that the command in my linux box is: route add default gw ip
what i have to do?
i modify a */etc/nsswitch.conf* and i added a dns word after files in hosts line.
create a */etc/defaultrouter* <-- this is to when i have a internal lan ip
in the */etc/hostname.nge0* put only my hostname
*/etc/hostname.nge0* <-- myhostname
or
*/etc/hostname.nge0* <-- inet myhostname
what is true? what is correct? i wsas reading about solaris offical docs about dhcpagent but i dont have clear my ideas.
please someone that you know how to set the internet connection on solaris dev exprres using the dhcp that serves on cable modem.
i dont believe that be more complicated than Linux or FreeBSD
Thanks.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

ASA 5505 - 2 Internet Connections, Problems with the Default Route

Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
Steffen

Phillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge

Hp laserjet Pro 200 M276nw won't consistently connect wirelessly with iMac

I'm on my second brand new hp laserjet Pro 200 M276nw in 3 days, it will not consistently connect wirelessly with my newly purchased (8days old) Apple refurbished 27" iMac on OSX 10.9, i7 chip & Fusion Drive. The hp laserjet will sometimes connect wirelessly immediately after clicking "print" on the iMac, but about half the time it says "printer not connected" & takes 2-4 minutes (or longer) before the devices do connect. I've called hp support many times, they're reset various things via remote takeover of my iMac, the printer will work for a few of minutes but then the same problem returns. AppleCare made sure I have the
correct Airprint driver installed & also checked my settings, but says they don't know why this is occurring. I've also verified that our newer (6 months old) AT&T router is functioning correctly.
My older hp laserjet (CM1312nfi MFP) has worked flawlessly since 2009 via USB connection with my old iMac (still on Snow Leopard), I assumed it would continue with the new one, but there is no software update for Mavericks & the scanning feature won't operate on the new iMac. Hp says it is a discontinued model. The new hp laserjet is a successor model to the older one, they are both very similar except for the new wireless feature.
I can print fast & wirelessly from the new iMac via a different new hp inkjet printer (8600 series) here in the house. This inkjet printer is less than a month old, I installed it myself for a Windows laptop here, it has never malfunctioned. Unfortunately it's upstairs & I do not like inkjet print quality, I need a good laserjet here in my office downstairs next to my iMac.

HI there
Did you manage to sort this issue out - as I have exactly the same problem.
Lots of similarities as I also have an inkjet 8600 which works via USB and wirelessly no problems at all!
I always buy HP printers as they are usually easy to set up - but this one is making me tear my hair out!
I've even upgraded to Yosemite and downloaded the new drivers from HP - no success. The printer will print one page and then become unavailable.
I can print via USB or wireless direct - but not just via my wireless network which is what I want to do!
No responses posted - so assume no one has a fix.
aaaargh!!!

Can't get pass "Internet connection" on Setup wizard for new Linksys WRT54g router

Hello everyone.
Well, I just bought (today) a Linksys WRT54G wirelss router and wile going through the Setup portion of the wizard (part of the installation of the EasyLink Advisor application), after I connect all the cables (in proper order) it tries to establish an Internet connection but comes back saying that no Internet connection is present. I tried powering off and umplugging the Verizon Westell modem I have but it still says the same thing. I even tried to get the set up completed with two other verizon modems I have but just can't get pass checking for Internet connection.
My ISP is Verizon and I use just a regular DSL connection using a Westell VersaLink model 327W.
Is there anything I need to do to get this going? I mean, the set up CD shows how to hook up the cables and everything so it really is not that hard but right after the "hook up the cable" portion it check for an Internet connection and that's were I get stuck.
Any help will be appreciated.

Your problem is that the Westel "modem" is actually a "modem-router", and it uses the same 192.168.1.x address space as the WRT54G.
The ideal solution is to place the Westell into "bridge" mode. This will convert it to a true modem (all router features are turned off). I assume you are using PPPoE (if this is not correct, please let me know). If so, then you will need to setup the WRT54G to do your PPPoE login, when the Westell is set to bridge mode. Also note that you must first disconnect the Westell from the WRT54G and from the Internet, before you attempt to place the Westell into bridge mode.
An alternate solution is to leave the Westell as is, disconnect it from the WRT54G, then login to the WRT54G and change the "Local IP address" to 192.168.2.1 , then reconnect your system. In this case, the Westell will do your PPPoE login, and the WRT54G will be set to "Internet connection type" of "DHCP - automatic". If all you do is browse the web, do some emails, and basic stuff, this setup will probably work OK. If you are planning more complicated stuff (Internet gaming with port forwarding, video conferencing, etc.) then be sure to use the "bridge" mode described above.

How can i share my internet connection

I'm having problems sharing my internet connection wirelessly (from my netgear router) with my TV via the AX.
I've managed to setup the Airtunes - streamling nicely through the house.
But under the internet options, sharing and the bridge option are disabled (greyed out).
Please advise. Many thanks.

To enable the AXn's Ethernet port, it would need to be reconfigured as an Ethernet bridge. Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz.

Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

Yes, that is possible. Please check out the following Apple Support article for details on how.

Can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

Theoretically yes. It will really depend on your situation. Please review the following Apple Support article to understand what is possible with the AirPort base stations and post back with any questions or help in setting up your extended network.

HT1222 I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

The iPhone requires wi-fi to update if you try to update over the air, since the phone needs to reboot, thus disconnecting itself. You can update via iTunes and the computer, but you would not be able to tether to the phone for the internet connection, since the phone would disconnect. So, you can either update via wi-fi and the phone, or you can update with a computer that has an internet connection other than the phone.

Can I tether the internet connection from a smartphone to my iPod?

Hello everyone,
I own iPod Touch 4 with iOS 4.3.3 (8J2). I want my iPod be able to connect to the internet when WiFi broadcasting is not available around while I am on the go.
So my question is: Can I tether the internet connection from a smartphone to my iPod? With which smartphone or mobile OS other than iPhone/iOS?
I don't want to JB my iPod Touch.
I heard that smartphones with Android can tether the internet connection to iPod Touch, bu I am not sure, I searched the internet but couldn't find anything as I wanted.
Thanks, regards.
Erhan T.

I've got a (now considered ancient) Nokia N95 8 GB mobile, with the app JoikuSpot Light on it - has been working really well though I wouldn't suggest buying Nokia if you were going to buy a new mobile...if you happen to get your hands on an old-ish Nokia or Ericsson (Symbian platform) Joiku will do a good job of creating a wifi hotspot. Some more info under this thread:
https://discussions.apple.com/message/17315266#17315266
Good luck 8-)

Why can't I get internet connection while I am away from a WiFi connection?

Why can't I get internet connection while I am away from a WiFi connection?

Some more information other than why would help. Does your service provider allow cellular data on your plan? Do you have cellular data turned on? Are you in a area with cellular coverage?

IPad 2 and iPhone 4 - can't get an internet connection while tethered

I have an iPad 2 and an iPhone 4. Been using the iPhone to tether my iPad for a few weeks and all of a sudden when it's tethered I can't get an internet connection. Both iPhone and iPad are updated with latest software.

Hello Emma I presume your in the UK.
In the UK PPPoA is the standard PPPoE is not supported by many ISP's.
On your Mac just use DHCP in your Network settings. Do not use PPPoE.
Then login to your router's web configuration page. http://192.168.0.1 or http://192.168.1.1. Admin and Password are the usual login details for netgear routers.
use the following details
PPPoA
VC-Mux
Chap authentication
vpi and vci are 38,0
and of course use your isp username and password.
Post edited. I just noticed you had already figured out the correct details.
Message was edited by: Tim Haigh

CAN'T SET UP INTERNET CONNECTION WIRELESS WITH EA6500 AC1750

Similar Messages

Maybe you are looking for